linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Bingbu Cao <bingbu.cao@intel.com>
Cc: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	linux-pci@vger.kernel.org, iommu@lists.linux-foundation.org,
	dwmw2@infradead.org, baolu.lu@linux.intel.com, joro@8bytes.org,
	will@kernel.org, bhelgaas@google.com, rajatja@google.com,
	grundler@chromium.org, tfiga@chromium.org,
	senozhatsky@chromium.org, andriy.shevchenko@linux.intel.com,
	bingbu.cao@linux.intel.com
Subject: Re: [RESEND v2] iommu/vt-d: Use passthrough mode for the Intel IPUs
Date: Tue, 20 Apr 2021 12:13:09 +0300	[thread overview]
Message-ID: <20210420091309.GH3@paasikivi.fi.intel.com> (raw)
In-Reply-To: <1618886913-6594-1-git-send-email-bingbu.cao@intel.com>

Hi Bingbu,

Thanks for the patch.

On Tue, Apr 20, 2021 at 10:48:33AM +0800, Bingbu Cao wrote:
> Intel IPU(Image Processing Unit) has its own (IO)MMU hardware,
> The IPU driver allocates its own page table that is not mapped
> via the DMA, and thus the Intel IOMMU driver blocks access giving
> this error:

The page table should be mapped to the possible IOMMU using the DMA API.

> 
> DMAR: DRHD: handling fault status reg 3
> DMAR: [DMA Read] Request device [00:05.0] PASID ffffffff
>       fault addr 76406000 [fault reason 06] PTE Read access is not set
> 
> As IPU is not an external facing device which is not risky, so use
> IOMMU passthrough mode for Intel IPUs.

I think a factor here is that the page tables aren't accessible by the IPU
firmware.

> 
> Fixes: 26f5689592e2 ("media: staging/intel-ipu3: mmu: Implement driver")
> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
> ---
>  drivers/iommu/intel/iommu.c | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index ee0932307d64..7e2fbdae467e 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -55,6 +55,12 @@
>  #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
>  #define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
>  #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
> +#define IS_INTEL_IPU(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL &&	\
> +			    ((pdev)->device == 0x9a19 ||		\
> +			     (pdev)->device == 0x9a39 ||		\
> +			     (pdev)->device == 0x4e19 ||		\
> +			     (pdev)->device == 0x465d ||		\
> +			     (pdev)->device == 0x1919))
>  #define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
>  
>  #define IOAPIC_RANGE_START	(0xfee00000)
> @@ -360,6 +366,7 @@ int intel_iommu_enabled = 0;
>  EXPORT_SYMBOL_GPL(intel_iommu_enabled);
>  
>  static int dmar_map_gfx = 1;
> +static int dmar_map_ipu = 1;

This works as long as there's only one IPU. Same for graphics. But I guess
this can be reworked in the future if the presumption changes.

>  static int dmar_forcedac;
>  static int intel_iommu_strict;
>  static int intel_iommu_superpage = 1;
> @@ -368,6 +375,7 @@ static int iommu_skip_te_disable;
>  
>  #define IDENTMAP_GFX		2
>  #define IDENTMAP_AZALIA		4
> +#define IDENTMAP_IPU		8
>  
>  int intel_iommu_gfx_mapped;
>  EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
> @@ -2839,6 +2847,9 @@ static int device_def_domain_type(struct device *dev)
>  
>  		if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
>  			return IOMMU_DOMAIN_IDENTITY;
> +
> +		if ((iommu_identity_mapping & IDENTMAP_IPU) && IS_INTEL_IPU(pdev))
> +			return IOMMU_DOMAIN_IDENTITY;
>  	}
>  
>  	return 0;
> @@ -3278,6 +3289,9 @@ static int __init init_dmars(void)
>  	if (!dmar_map_gfx)
>  		iommu_identity_mapping |= IDENTMAP_GFX;
>  
> +	if (!dmar_map_ipu)
> +		iommu_identity_mapping |= IDENTMAP_IPU;
> +
>  	check_tylersburg_isoch();
>  
>  	ret = si_domain_init(hw_pass_through);
> @@ -5622,6 +5636,18 @@ static void quirk_iommu_igfx(struct pci_dev *dev)
>  	dmar_map_gfx = 0;
>  }
>  
> +static void quirk_iommu_ipu(struct pci_dev *dev)
> +{
> +	if (!IS_INTEL_IPU(dev))
> +		return;
> +
> +	if (risky_device(dev))
> +		return;
> +
> +	pci_info(dev, "Passthrough IOMMU for integrated Intel IPU\n");
> +	dmar_map_ipu = 0;
> +}
> +
>  /* G4x/GM45 integrated gfx dmar support is totally busted. */
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx);
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx);
> @@ -5657,6 +5683,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx);
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx);
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx);
>  
> +/* disable IPU dmar support */
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_iommu_ipu);
> +
>  static void quirk_iommu_rwbf(struct pci_dev *dev)
>  {
>  	if (risky_device(dev))

-- 
Kind regards,

Sakari Ailus

  reply	other threads:[~2021-04-20 11:02 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20  2:48 [RESEND v2] iommu/vt-d: Use passthrough mode for the Intel IPUs Bingbu Cao
2021-04-20  9:13 ` Sakari Ailus [this message]
2021-04-20 17:30   ` Grant Grundler
2021-04-20 10:20 ` Andy Shevchenko
2021-04-20 10:34   ` Bingbu Cao
2021-04-20 10:56     ` Sakari Ailus
2021-04-20 11:55       ` Andy Shevchenko
2021-04-20 14:37         ` Sakari Ailus
2021-04-20 14:54           ` Andy Shevchenko
2021-04-20 15:27             ` Sakari Ailus
2021-04-20 10:21 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420091309.GH3@paasikivi.fi.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=bingbu.cao@intel.com \
    --cc=bingbu.cao@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=grundler@chromium.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rajatja@google.com \
    --cc=senozhatsky@chromium.org \
    --cc=stable@vger.kernel.org \
    --cc=tfiga@chromium.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).