[PATCH AUTOSEL 5.14 04/32] PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms

[PATCH AUTOSEL 5.14 04/32] PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms

[Sasha Levin]

From: Wasim Khan <wasim.khan@nxp.com>

[ Upstream commit d08c8b855140e9f5240b3ffd1b8b9d435675e281 ]

Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex
with unique segment numbers, do provide isolation features to disable peer
transactions and validate bus numbers in requests, but do not provide an
actual PCIe ACS capability.

Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms.

  LX2xx0A : without security features + CAN-FD
    LX2160A (0x8d81) - 16 cores
    LX2120A (0x8da1) - 12 cores
    LX2080A (0x8d83) -  8 cores

  LX2xx0C : security features + CAN-FD
    LX2160C (0x8d80) - 16 cores
    LX2120C (0x8da0) - 12 cores
    LX2080C (0x8d82) -  8 cores

  LX2xx0E : security features + CAN
    LX2160E (0x8d90) - 16 cores
    LX2120E (0x8db0) - 12 cores
    LX2080E (0x8d92) -  8 cores

  LX2xx0N : without security features + CAN
    LX2160N (0x8d91) - 16 cores
    LX2120N (0x8db1) - 12 cores
    LX2080N (0x8d93) -  8 cores

  LX2xx2A : without security features + CAN-FD
    LX2162A (0x8d89) - 16 cores
    LX2122A (0x8da9) - 12 cores
    LX2082A (0x8d8b) -  8 cores

  LX2xx2C : security features + CAN-FD
    LX2162C (0x8d88) - 16 cores
    LX2122C (0x8da8) - 12 cores
    LX2082C (0x8d8a) -  8 cores

  LX2xx2E : security features + CAN
    LX2162E (0x8d98) - 16 cores
    LX2122E (0x8db8) - 12 cores
    LX2082E (0x8d9a) -  8 cores

  LX2xx2N : without security features + CAN
    LX2162N (0x8d99) - 16 cores
    LX2122N (0x8db9) - 12 cores
    LX2082N (0x8d9b) -  8 cores

[bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE
as a clue that they share the same Device ID namespace]
Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com
Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c    | 45 +++++++++++++++++++++++++++++++++++++++++
 include/linux/pci_ids.h |  3 ++-
 2 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ab3de1551b50..a59658f1501e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4615,6 +4615,18 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
 		PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
 }
 
+/*
+ * Each of these NXP Root Ports is in a Root Complex with a unique segment
+ * number and does provide isolation features to disable peer transactions
+ * and validate bus numbers in requests, but does not provide an ACS
+ * capability.
+ */
+static int pci_quirk_nxp_rp_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	return pci_acs_ctrl_enabled(acs_flags,
+		PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
 static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
 {
 	if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
@@ -4861,6 +4873,39 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
+	/* NXP root ports, xx=16, 12, or 08 cores */
+	/* LX2xx0A : without security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d81, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da1, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d83, pci_quirk_nxp_rp_acs },
+	/* LX2xx0C : security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d80, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da0, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d82, pci_quirk_nxp_rp_acs },
+	/* LX2xx0E : security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d90, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db0, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d92, pci_quirk_nxp_rp_acs },
+	/* LX2xx0N : without security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d91, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db1, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d93, pci_quirk_nxp_rp_acs },
+	/* LX2xx2A : without security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d89, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da9, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d8b, pci_quirk_nxp_rp_acs },
+	/* LX2xx2C : security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d88, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da8, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d8a, pci_quirk_nxp_rp_acs },
+	/* LX2xx2E : security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d98, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db8, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d9a, pci_quirk_nxp_rp_acs },
+	/* LX2xx2N : without security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d99, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db9, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
 	/* Zhaoxin Root/Downstream Ports */
 	{ PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
 	{ 0 }
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4bac1831de80..1a9b8589391c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2451,7 +2451,8 @@
 #define PCI_VENDOR_ID_TDI               0x192E
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 
-#define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_VENDOR_ID_FREESCALE		0x1957	/* duplicate: NXP */
+#define PCI_VENDOR_ID_NXP		0x1957	/* duplicate: FREESCALE */
 #define PCI_DEVICE_ID_MPC8308		0xc006
 #define PCI_DEVICE_ID_MPC8315E		0x00b4
 #define PCI_DEVICE_ID_MPC8315		0x00b5
-- 
2.30.2

[PATCH AUTOSEL 5.14 06/32] PCI: tegra194: Fix handling BME_CHGED event

[Sasha Levin]

From: Om Prakash Singh <omp@nvidia.com>

[ Upstream commit ceb1412c1c8ca5b28c4252bdb15f2f1f17b4a1b0 ]

In tegra_pcie_ep_hard_irq(), APPL_INTR_STATUS_L0 is stored in val and again
APPL_INTR_STATUS_L1_0_0 is also stored in val. So when execution reaches
"if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT)", val is not correct.

Link: https://lore.kernel.org/r/20210623100525.19944-2-omp@nvidia.com
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 30 +++++++++++-----------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 3ec7b29d5dc7..fd14e2f45bba 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -497,19 +497,19 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 	struct tegra_pcie_dw *pcie = arg;
 	struct dw_pcie_ep *ep = &pcie->pci.ep;
 	int spurious = 1;
-	u32 val, tmp;
+	u32 status_l0, status_l1, link_status;
 
-	val = appl_readl(pcie, APPL_INTR_STATUS_L0);
-	if (val & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
-		val = appl_readl(pcie, APPL_INTR_STATUS_L1_0_0);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L1_0_0);
+	status_l0 = appl_readl(pcie, APPL_INTR_STATUS_L0);
+	if (status_l0 & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
+		status_l1 = appl_readl(pcie, APPL_INTR_STATUS_L1_0_0);
+		appl_writel(pcie, status_l1, APPL_INTR_STATUS_L1_0_0);
 
-		if (val & APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE)
+		if (status_l1 & APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE)
 			pex_ep_event_hot_rst_done(pcie);
 
-		if (val & APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED) {
-			tmp = appl_readl(pcie, APPL_LINK_STATUS);
-			if (tmp & APPL_LINK_STATUS_RDLH_LINK_UP) {
+		if (status_l1 & APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED) {
+			link_status = appl_readl(pcie, APPL_LINK_STATUS);
+			if (link_status & APPL_LINK_STATUS_RDLH_LINK_UP) {
 				dev_dbg(pcie->dev, "Link is up with Host\n");
 				dw_pcie_ep_linkup(ep);
 			}
@@ -518,11 +518,11 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 		spurious = 0;
 	}
 
-	if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT) {
-		val = appl_readl(pcie, APPL_INTR_STATUS_L1_15);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L1_15);
+	if (status_l0 & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT) {
+		status_l1 = appl_readl(pcie, APPL_INTR_STATUS_L1_15);
+		appl_writel(pcie, status_l1, APPL_INTR_STATUS_L1_15);
 
-		if (val & APPL_INTR_STATUS_L1_15_CFG_BME_CHGED)
+		if (status_l1 & APPL_INTR_STATUS_L1_15_CFG_BME_CHGED)
 			return IRQ_WAKE_THREAD;
 
 		spurious = 0;
@@ -530,8 +530,8 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 
 	if (spurious) {
 		dev_warn(pcie->dev, "Random interrupt (STATUS = 0x%08X)\n",
-			 val);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L0);
+			 status_l0);
+		appl_writel(pcie, status_l0, APPL_INTR_STATUS_L0);
 	}
 
 	return IRQ_HANDLED;
-- 
2.30.2

[PATCH AUTOSEL 5.14 07/32] PCI: tegra194: Fix MSI-X programming

[Sasha Levin]

From: Om Prakash Singh <omp@nvidia.com>

[ Upstream commit 43537cf7e351264a1f05ed42ad402942bfc9140e ]

Lower order MSI-X address is programmed in MSIX_ADDR_MATCH_HIGH_OFF
DBI register instead of higher order address. This patch fixes this
programming mistake.

Link: https://lore.kernel.org/r/20210623100525.19944-3-omp@nvidia.com
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index fd14e2f45bba..55c8afb9a899 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1763,7 +1763,7 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	val = (ep->msi_mem_phys & MSIX_ADDR_MATCH_LOW_OFF_MASK);
 	val |= MSIX_ADDR_MATCH_LOW_OFF_EN;
 	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_LOW_OFF, val);
-	val = (lower_32_bits(ep->msi_mem_phys) & MSIX_ADDR_MATCH_HIGH_OFF_MASK);
+	val = (upper_32_bits(ep->msi_mem_phys) & MSIX_ADDR_MATCH_HIGH_OFF_MASK);
 	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_HIGH_OFF, val);
 
 	ret = dw_pcie_ep_init_complete(ep);
-- 
2.30.2

[PATCH AUTOSEL 5.14 08/32] PCI: tegra: Fix OF node reference leak

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit eff21f5da308265678e7e59821795e606f3e560f ]

Commit 9e38e690ace3 ("PCI: tegra: Fix OF node reference leak") has fixed
some node reference leaks in this function but missed some of them.

In fact, having 'port' referenced in the 'rp' structure is not enough to
prevent the leak, until 'rp' is actually added in the 'pcie->ports' list.

Add the missing 'goto err_node_put' accordingly.

Link: https://lore.kernel.org/r/55b11e9a7fa2987fbc0869d68ae59888954d65e2.1620148539.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index c979229a6d0d..b358212d71ab 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -2193,13 +2193,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		rp->np = port;
 
 		rp->base = devm_pci_remap_cfg_resource(dev, &rp->regs);
-		if (IS_ERR(rp->base))
-			return PTR_ERR(rp->base);
+		if (IS_ERR(rp->base)) {
+			err = PTR_ERR(rp->base);
+			goto err_node_put;
+		}
 
 		label = devm_kasprintf(dev, GFP_KERNEL, "pex-reset-%u", index);
 		if (!label) {
-			dev_err(dev, "failed to create reset GPIO label\n");
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto err_node_put;
 		}
 
 		/*
@@ -2217,7 +2219,8 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 			} else {
 				dev_err(dev, "failed to get reset GPIO: %ld\n",
 					PTR_ERR(rp->reset_gpio));
-				return PTR_ERR(rp->reset_gpio);
+				err = PTR_ERR(rp->reset_gpio);
+				goto err_node_put;
 			}
 		}
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 10/32] PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 1e29cd9983eba1b596bc07f94d81d728007f8a25 ]

pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.

Link: https://lore.kernel.org/r/20210408072402.15069-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rcar-ep.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar-ep.c b/drivers/pci/controller/pcie-rcar-ep.c
index b4a288e24aaf..c91d85b15129 100644
--- a/drivers/pci/controller/pcie-rcar-ep.c
+++ b/drivers/pci/controller/pcie-rcar-ep.c
@@ -492,9 +492,9 @@ static int rcar_pcie_ep_probe(struct platform_device *pdev)
 	pcie->dev = dev;
 
 	pm_runtime_enable(dev);
-	err = pm_runtime_get_sync(dev);
+	err = pm_runtime_resume_and_get(dev);
 	if (err < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err(dev, "pm_runtime_resume_and_get failed\n");
 		goto err_pm_disable;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 12/32] PCI: rcar: Add L1 link state fix into data abort hook

[Sasha Levin]

From: Marek Vasut <marek.vasut+renesas@gmail.com>

[ Upstream commit a115b1bd3af0c2963e72f6e47143724c59251be6 ]

When the link is in L1, hardware should return it to L0
automatically whenever a transaction targets a component on the
other end of the link (PCIe r5.0, sec 5.2).

The R-Car PCIe controller doesn't handle this transition correctly.
If the link is not in L0, an MMIO transaction targeting a downstream
device fails, and the controller reports an ARM imprecise external
abort.

Work around this by hooking the abort handler so the driver can
detect this situation and help the hardware complete the link state
transition.

When the R-Car controller receives a PM_ENTER_L1 DLLP from the
downstream component, it sets PMEL1RX bit in PMSR register, but then
the controller enters some sort of in-between state.  A subsequent
MMIO transaction will fail, resulting in the external abort.  The
abort handler detects this condition and completes the link state
transition by setting the L1IATN bit in PMCTLR and waiting for the
link state transition to complete.

Link: https://lore.kernel.org/r/20210815181650.132579-1-marek.vasut@gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rcar-host.c | 86 +++++++++++++++++++++++++
 drivers/pci/controller/pcie-rcar.h      |  7 ++
 2 files changed, 93 insertions(+)

diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c
index 765cf2b45e24..11fcaa54c169 100644
--- a/drivers/pci/controller/pcie-rcar-host.c
+++ b/drivers/pci/controller/pcie-rcar-host.c
@@ -13,12 +13,14 @@
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -41,6 +43,21 @@ struct rcar_msi {
 	int irq2;
 };
 
+#ifdef CONFIG_ARM
+/*
+ * Here we keep a static copy of the remapped PCIe controller address.
+ * This is only used on aarch32 systems, all of which have one single
+ * PCIe controller, to provide quick access to the PCIe controller in
+ * the L1 link state fixup function, called from the ARM fault handler.
+ */
+static void __iomem *pcie_base;
+/*
+ * Static copy of bus clock pointer, so we can check whether the clock
+ * is enabled or not.
+ */
+static struct clk *pcie_bus_clk;
+#endif
+
 /* Structure representing the PCIe interface */
 struct rcar_pcie_host {
 	struct rcar_pcie	pcie;
@@ -776,6 +793,12 @@ static int rcar_pcie_get_resources(struct rcar_pcie_host *host)
 	}
 	host->msi.irq2 = i;
 
+#ifdef CONFIG_ARM
+	/* Cache static copy for L1 link state fixup hook on aarch32 */
+	pcie_base = pcie->base;
+	pcie_bus_clk = host->bus_clk;
+#endif
+
 	return 0;
 
 err_irq2:
@@ -1031,4 +1054,67 @@ static struct platform_driver rcar_pcie_driver = {
 	},
 	.probe = rcar_pcie_probe,
 };
+
+#ifdef CONFIG_ARM
+static DEFINE_SPINLOCK(pmsr_lock);
+static int rcar_pcie_aarch32_abort_handler(unsigned long addr,
+		unsigned int fsr, struct pt_regs *regs)
+{
+	unsigned long flags;
+	u32 pmsr, val;
+	int ret = 0;
+
+	spin_lock_irqsave(&pmsr_lock, flags);
+
+	if (!pcie_base || !__clk_is_enabled(pcie_bus_clk)) {
+		ret = 1;
+		goto unlock_exit;
+	}
+
+	pmsr = readl(pcie_base + PMSR);
+
+	/*
+	 * Test if the PCIe controller received PM_ENTER_L1 DLLP and
+	 * the PCIe controller is not in L1 link state. If true, apply
+	 * fix, which will put the controller into L1 link state, from
+	 * which it can return to L0s/L0 on its own.
+	 */
+	if ((pmsr & PMEL1RX) && ((pmsr & PMSTATE) != PMSTATE_L1)) {
+		writel(L1IATN, pcie_base + PMCTLR);
+		ret = readl_poll_timeout_atomic(pcie_base + PMSR, val,
+						val & L1FAEG, 10, 1000);
+		WARN(ret, "Timeout waiting for L1 link state, ret=%d\n", ret);
+		writel(L1FAEG | PMEL1RX, pcie_base + PMSR);
+	}
+
+unlock_exit:
+	spin_unlock_irqrestore(&pmsr_lock, flags);
+	return ret;
+}
+
+static const struct of_device_id rcar_pcie_abort_handler_of_match[] __initconst = {
+	{ .compatible = "renesas,pcie-r8a7779" },
+	{ .compatible = "renesas,pcie-r8a7790" },
+	{ .compatible = "renesas,pcie-r8a7791" },
+	{ .compatible = "renesas,pcie-rcar-gen2" },
+	{},
+};
+
+static int __init rcar_pcie_init(void)
+{
+	if (of_find_matching_node(NULL, rcar_pcie_abort_handler_of_match)) {
+#ifdef CONFIG_ARM_LPAE
+		hook_fault_code(17, rcar_pcie_aarch32_abort_handler, SIGBUS, 0,
+				"asynchronous external abort");
+#else
+		hook_fault_code(22, rcar_pcie_aarch32_abort_handler, SIGBUS, 0,
+				"imprecise external abort");
+#endif
+	}
+
+	return platform_driver_register(&rcar_pcie_driver);
+}
+device_initcall(rcar_pcie_init);
+#else
 builtin_platform_driver(rcar_pcie_driver);
+#endif
diff --git a/drivers/pci/controller/pcie-rcar.h b/drivers/pci/controller/pcie-rcar.h
index d4c698b5f821..9bb125db85c6 100644
--- a/drivers/pci/controller/pcie-rcar.h
+++ b/drivers/pci/controller/pcie-rcar.h
@@ -85,6 +85,13 @@
 #define  LTSMDIS		BIT(31)
 #define  MACCTLR_INIT_VAL	(LTSMDIS | MACCTLR_NFTS_MASK)
 #define PMSR			0x01105c
+#define  L1FAEG			BIT(31)
+#define  PMEL1RX		BIT(23)
+#define  PMSTATE		GENMASK(18, 16)
+#define  PMSTATE_L1		(3 << 16)
+#define PMCTLR			0x011060
+#define  L1IATN			BIT(31)
+
 #define MACS2R			0x011078
 #define MACCGSPSETR		0x011084
 #define  SPCNGRSN		BIT(31)
-- 
2.30.2

Re: [PATCH AUTOSEL 5.14 12/32] PCI: rcar: Add L1 link state fix into data abort hook

[Marek Vasut]

On 9/11/21 3:11 PM, Sasha Levin wrote:
> From: Marek Vasut <marek.vasut+renesas@gmail.com>
> 
> [ Upstream commit a115b1bd3af0c2963e72f6e47143724c59251be6 ]
> 
> When the link is in L1, hardware should return it to L0
> automatically whenever a transaction targets a component on the
> other end of the link (PCIe r5.0, sec 5.2).
> 
> The R-Car PCIe controller doesn't handle this transition correctly.
> If the link is not in L0, an MMIO transaction targeting a downstream
> device fails, and the controller reports an ARM imprecise external
> abort.
> 
> Work around this by hooking the abort handler so the driver can
> detect this situation and help the hardware complete the link state
> transition.
> 
> When the R-Car controller receives a PM_ENTER_L1 DLLP from the
> downstream component, it sets PMEL1RX bit in PMSR register, but then
> the controller enters some sort of in-between state.  A subsequent
> MMIO transaction will fail, resulting in the external abort.  The
> abort handler detects this condition and completes the link state
> transition by setting the L1IATN bit in PMCTLR and waiting for the
> link state transition to complete.

You will also need the following patch, otherwise the build will fail on 
configurations without COMMON_CLK (none where this driver is used, but 
happened on one of the build bots). I'm waiting for PCIe maintainers to 
pick it up:
https://patchwork.kernel.org/project/linux-pci/patch/20210907144512.5238-1-marek.vasut@gmail.com/

Re: [PATCH AUTOSEL 5.14 12/32] PCI: rcar: Add L1 link state fix into data abort hook

[Sasha Levin]

On Sat, Sep 11, 2021 at 06:05:37PM +0200, Marek Vasut wrote:
>On 9/11/21 3:11 PM, Sasha Levin wrote:
>>From: Marek Vasut <marek.vasut+renesas@gmail.com>
>>
>>[ Upstream commit a115b1bd3af0c2963e72f6e47143724c59251be6 ]
>>
>>When the link is in L1, hardware should return it to L0
>>automatically whenever a transaction targets a component on the
>>other end of the link (PCIe r5.0, sec 5.2).
>>
>>The R-Car PCIe controller doesn't handle this transition correctly.
>>If the link is not in L0, an MMIO transaction targeting a downstream
>>device fails, and the controller reports an ARM imprecise external
>>abort.
>>
>>Work around this by hooking the abort handler so the driver can
>>detect this situation and help the hardware complete the link state
>>transition.
>>
>>When the R-Car controller receives a PM_ENTER_L1 DLLP from the
>>downstream component, it sets PMEL1RX bit in PMSR register, but then
>>the controller enters some sort of in-between state.  A subsequent
>>MMIO transaction will fail, resulting in the external abort.  The
>>abort handler detects this condition and completes the link state
>>transition by setting the L1IATN bit in PMCTLR and waiting for the
>>link state transition to complete.
>
>You will also need the following patch, otherwise the build will fail 
>on configurations without COMMON_CLK (none where this driver is used, 
>but happened on one of the build bots). I'm waiting for PCIe 
>maintainers to pick it up:
>https://patchwork.kernel.org/project/linux-pci/patch/20210907144512.5238-1-marek.vasut@gmail.com/

I see that it's not upstream yet, so I'll drop this patch for now.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit f4455748b2126a9ba2bcc9cfb2fbcaa08de29bb2 ]

No functional change. As we are intending to add additional 1-bit
members in struct j721e_pcie_data/struct cdns_pcie_rc, use bitfields
instead of bool since it takes less space. As discussed in [1],
the preference is to use bitfileds instead of bool inside structures.

[1] -> https://lore.kernel.org/linux-fsdevel/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210811123336.31357-2-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c    | 2 +-
 drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..0c5813b230b4 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -66,7 +66,7 @@ enum j721e_pcie_mode {
 
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
-	bool quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 30db2d68c17a..bc27d126f239 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -303,7 +303,7 @@ struct cdns_pcie_rc {
 	u32			vendor_id;
 	u32			device_id;
 	bool			avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
-	bool                    quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
 };
 
 /**
-- 
2.30.2

[PATCH AUTOSEL 5.14 16/32] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state

[Sasha Levin]

From: Nadeem Athani <nadeem@cadence.com>

[ Upstream commit 09c24094b2e3a15ef3fc44f54a191b3db522fb11 ]

PCIe fails to link up if SERDES lanes not used by PCIe are assigned to
another protocol. For example, link training fails if lanes 2 and 3 are
assigned to another protocol while lanes 0 and 1 are used for PCIe to
form a two lane link. This failure is due to an incorrect tie-off on an
internal status signal indicating electrical idle.

Status signals going from SERDES to PCIe Controller are tied-off when a
lane is not assigned to PCIe. Signal indicating electrical idle is
incorrectly tied-off to a state that indicates non-idle. As a result,
PCIe sees unused lanes to be out of electrical idle and this causes
LTSSM to exit Detect.Quiet state without waiting for 12ms timeout to
occur. If a receiver is not detected on the first receiver detection
attempt in Detect.Active state, LTSSM goes back to Detect.Quiet and
again moves forward to Detect.Active state without waiting for 12ms as
required by PCIe base specification. Since wait time in Detect.Quiet is
skipped, multiple receiver detect operations are performed back-to-back
without allowing time for capacitance on the transmit lines to
discharge. This causes subsequent receiver detection to always fail even
if a receiver gets connected eventually.

Add a quirk flag "quirk_detect_quiet_flag" to program the minimum
time the LTSSM should wait on entering Detect.Quiet state here.
This has to be set for J7200 as it has an incorrect tie-off on unused
lanes.

Link: https://lore.kernel.org/r/20210811123336.31357-3-kishon@ti.com
Signed-off-by: Nadeem Athani <nadeem@cadence.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pcie-cadence-ep.c |  4 ++++
 .../pci/controller/cadence/pcie-cadence-host.c   |  3 +++
 drivers/pci/controller/cadence/pcie-cadence.c    | 16 ++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h    | 15 +++++++++++++++
 4 files changed, 38 insertions(+)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 897cdde02bd8..dd7df1ac7fda 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -623,6 +623,10 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_NONE;
 	/* Reserve region 0 for IRQs */
 	set_bit(0, &ep->ob_region_map);
+
+	if (ep->quirk_detect_quiet_flag)
+		cdns_pcie_detect_quiet_min_delay_set(&ep->pcie);
+
 	spin_lock_init(&ep->lock);
 
 	return 0;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index ae1c55503513..fb96d37a135c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -498,6 +498,9 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 		return PTR_ERR(rc->cfg_base);
 	rc->cfg_res = res;
 
+	if (rc->quirk_detect_quiet_flag)
+		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
+
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
 		dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index 3c3646502d05..52767f26048f 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -7,6 +7,22 @@
 
 #include "pcie-cadence.h"
 
+void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie)
+{
+	u32 delay = 0x3;
+	u32 ltssm_control_cap;
+
+	/*
+	 * Set the LTSSM Detect Quiet state min. delay to 2ms.
+	 */
+	ltssm_control_cap = cdns_pcie_readl(pcie, CDNS_PCIE_LTSSM_CONTROL_CAP);
+	ltssm_control_cap = ((ltssm_control_cap &
+			    ~CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK) |
+			    CDNS_PCIE_DETECT_QUIET_MIN_DELAY(delay));
+
+	cdns_pcie_writel(pcie, CDNS_PCIE_LTSSM_CONTROL_CAP, ltssm_control_cap);
+}
+
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 busnr, u8 fn,
 				   u32 r, bool is_io,
 				   u64 cpu_addr, u64 pci_addr, size_t size)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index bc27d126f239..4bde99b74135 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -189,6 +189,14 @@
 /* AXI link down register */
 #define CDNS_PCIE_AT_LINKDOWN (CDNS_PCIE_AT_BASE + 0x0824)
 
+/* LTSSM Capabilities register */
+#define CDNS_PCIE_LTSSM_CONTROL_CAP             (CDNS_PCIE_LM_BASE + 0x0054)
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK  GENMASK(2, 1)
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY_SHIFT 1
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY(delay) \
+	 (((delay) << CDNS_PCIE_DETECT_QUIET_MIN_DELAY_SHIFT) & \
+	 CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK)
+
 enum cdns_pcie_rp_bar {
 	RP_BAR_UNDEFINED = -1,
 	RP_BAR0,
@@ -295,6 +303,7 @@ struct cdns_pcie {
  * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
  *                available
  * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
+ * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
  */
 struct cdns_pcie_rc {
 	struct cdns_pcie	pcie;
@@ -304,6 +313,7 @@ struct cdns_pcie_rc {
 	u32			device_id;
 	bool			avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
 	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
 };
 
 /**
@@ -334,6 +344,7 @@ struct cdns_pcie_epf {
  *        registers fields (RMW) accessible by both remote RC and EP to
  *        minimize time between read and write
  * @epf: Structure to hold info about endpoint function
+ * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
  */
 struct cdns_pcie_ep {
 	struct cdns_pcie	pcie;
@@ -348,6 +359,7 @@ struct cdns_pcie_ep {
 	/* protect writing to PCI_STATUS while raising legacy interrupts */
 	spinlock_t		lock;
 	struct cdns_pcie_epf	*epf;
+	unsigned int		quirk_detect_quiet_flag:1;
 };
 
 
@@ -508,6 +520,9 @@ static inline int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	return 0;
 }
 #endif
+
+void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie);
+
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 busnr, u8 fn,
 				   u32 r, bool is_io,
 				   u64 cpu_addr, u64 pci_addr, size_t size);
-- 
2.30.2

[PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ]

J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.

Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 0c5813b230b4..10b13b728284 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -27,6 +27,7 @@
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
 #define LINK_DOWN		BIT(1)
+#define J7200_LINK_DOWN		BIT(10)
 
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
@@ -57,6 +58,7 @@ struct j721e_pcie {
 	struct cdns_pcie	*cdns_pcie;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
+	u32			linkdown_irq_regfield;
 };
 
 enum j721e_pcie_mode {
@@ -67,6 +69,9 @@ enum j721e_pcie_mode {
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
 	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
+	u32			linkdown_irq_regfield;
+	unsigned int		byte_access_allowed:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -98,12 +103,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
-	if (!(reg & LINK_DOWN))
+	if (!(reg & pcie->linkdown_irq_regfield))
 		return IRQ_NONE;
 
 	dev_err(dev, "LINK DOWN!\n");
 
-	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
 	return IRQ_HANDLED;
 }
 
@@ -112,7 +117,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
-	reg |= LINK_DOWN;
+	reg |= pcie->linkdown_irq_regfield;
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
@@ -284,10 +289,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
 	.quirk_retrain_flag = true,
+	.byte_access_allowed = false,
+	.linkdown_irq_regfield = LINK_DOWN,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.quirk_detect_quiet_flag = true,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.quirk_detect_quiet_flag = true,
 };
 
 static const struct of_device_id of_j721e_pcie_match[] = {
@@ -299,6 +319,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j721e-pcie-ep",
 		.data = &j721e_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j7200-pcie-host",
+		.data = &j7200_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j7200-pcie-ep",
+		.data = &j7200_pcie_ep_data,
+	},
 	{},
 };
 
@@ -332,6 +360,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	pcie->dev = dev;
 	pcie->mode = mode;
+	pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
 
 	base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
 	if (IS_ERR(base))
@@ -391,9 +420,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		bridge->ops = &cdns_ti_pcie_host_ops;
+		if (!data->byte_access_allowed)
+			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
 		rc->quirk_retrain_flag = data->quirk_retrain_flag;
+		rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;
@@ -459,6 +490,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto err_get_sync;
 		}
+		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
-- 
2.30.2

[PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit c8a375a8e15ac31293d7fda08008d6da8f5df3db ]

AM64 has the same PCIe IP as in J7200 with certain erratas not
applicable (quirk_detect_quiet_flag). Add support for "ti,am64-pcie-host"
compatible and "ti,am64-pcie-ep" compatible that is specific to AM64.

Link: https://lore.kernel.org/r/20210811123336.31357-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/cadence/pci-j721e.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 10b13b728284..ffb176d288cd 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -310,6 +310,17 @@ static const struct j721e_pcie_data j7200_pcie_ep_data = {
 	.quirk_detect_quiet_flag = true,
 };
 
+static const struct j721e_pcie_data am64_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data am64_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+};
+
 static const struct of_device_id of_j721e_pcie_match[] = {
 	{
 		.compatible = "ti,j721e-pcie-host",
@@ -327,6 +338,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j7200-pcie-ep",
 		.data = &j7200_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,am64-pcie-host",
+		.data = &am64_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,am64-pcie-ep",
+		.data = &am64_pcie_ep_data,
+	},
 	{},
 };
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 19/32] PCI: Add ACS quirks for Cavium multi-function devices

[Sasha Levin]

From: George Cherian <george.cherian@marvell.com>

[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ]

Some Cavium endpoints are implemented as multi-function devices without ACS
capability, but they actually don't support peer-to-peer transactions.

Add ACS quirks to declare DMA isolation for the following devices:

  - BGX device found on Octeon-TX (8xxx)
  - CGX device found on Octeon-TX2 (9xxx)
  - RPM device found on Octeon-TX3 (10xxx)

Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a59658f1501e..2d507a95e533 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4853,6 +4853,10 @@ static const struct pci_dev_acs_enabled {
 	{ 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
 	/* Cavium ThunderX */
 	{ PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
+	/* Cavium multi-function devices */
+	{ PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
 	/* APM X-Gene */
 	{ PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
 	/* Ampere Computing */
-- 
2.30.2

[PATCH AUTOSEL 5.14 26/32] PCI: ibmphp: Fix double unmap of io_mem

[Sasha Levin]

From: Vishal Aslot <os.vaslot@gmail.com>

[ Upstream commit faa2e05ad0dccf37f995bcfbb8d1980d66c02c11 ]

ebda_rsrc_controller() calls iounmap(io_mem) on the error path. Its caller,
ibmphp_access_ebda(), also calls iounmap(io_mem) on good and error paths.

Remove the iounmap(io_mem) invocation from ebda_rsrc_controller().

[bhelgaas: remove item from TODO]
Link: https://lore.kernel.org/r/20210818165751.591185-1-os.vaslot@gmail.com
Signed-off-by: Vishal Aslot <os.vaslot@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/TODO          | 3 ---
 drivers/pci/hotplug/ibmphp_ebda.c | 5 +----
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pci/hotplug/TODO b/drivers/pci/hotplug/TODO
index a32070be5adf..cc6194aa24c1 100644
--- a/drivers/pci/hotplug/TODO
+++ b/drivers/pci/hotplug/TODO
@@ -40,9 +40,6 @@ ibmphp:
 
 * The return value of pci_hp_register() is not checked.
 
-* iounmap(io_mem) is called in the error path of ebda_rsrc_controller()
-  and once more in the error path of its caller ibmphp_access_ebda().
-
 * The various slot data structures are difficult to follow and need to be
   simplified.  A lot of functions are too large and too complex, they need
   to be broken up into smaller, manageable pieces.  Negative examples are
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 11a2661dc062..7fb75401ad8a 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -714,8 +714,7 @@ static int __init ebda_rsrc_controller(void)
 		/* init hpc structure */
 		hpc_ptr = alloc_ebda_hpc(slot_num, bus_num);
 		if (!hpc_ptr) {
-			rc = -ENOMEM;
-			goto error_no_hpc;
+			return -ENOMEM;
 		}
 		hpc_ptr->ctlr_id = ctlr_id;
 		hpc_ptr->ctlr_relative_id = ctlr;
@@ -910,8 +909,6 @@ static int __init ebda_rsrc_controller(void)
 	kfree(tmp_slot);
 error_no_slot:
 	free_ebda_hpc(hpc_ptr);
-error_no_hpc:
-	iounmap(io_mem);
 	return rc;
 }
 
-- 
2.30.2