linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: gustavo.pimentel@synopsys.com, hongxing.zhu@nxp.com,
	l.stach@pengutronix.de, linux-imx@nxp.com,
	linux-pci@vger.kernel.org, dmaengine@vger.kernel.org,
	fancer.lancer@gmail.com, lznuaa@gmail.com, helgaas@kernel.org
Cc: vkoul@kernel.org, lorenzo.pieralisi@arm.com, robh@kernel.org,
	kw@linux.com, bhelgaas@google.com,
	manivannan.sadhasivam@linaro.org,
	Sergey.Semin@baikalelectronics.ru
Subject: [PATCH v10 7/9] dmaengine: dw-edma: Add support for chip specific flags
Date: Mon,  2 May 2022 19:57:59 -0500	[thread overview]
Message-ID: <20220503005801.1714345-8-Frank.Li@nxp.com> (raw)
In-Reply-To: <20220503005801.1714345-1-Frank.Li@nxp.com>

Add a "flags" field to the "struct dw_edma_chip" so that the controller
drivers can pass flags that are relevant to the platform.

DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA
locally. Local eDMA access doesn't require generating MSIs to the remote.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
---
Change from v7 to v10
 -none
Change from v6 to v7
 - dw_edma_chip_flags to u32
Change from v5 to v6
 - use enum instead of define

Change from v4 to v5
 - split two two patch
 - rework commit message
Change from v3 to v4
none
Change from v2 to v3
 - rework commit message
 - Change to DW_EDMA_CHIP_32BIT_DBI
 - using DW_EDMA_CHIP_LOCAL control msi
 - Apply Bjorn's comments,
        if (!j) {
               control |= DW_EDMA_V0_LIE;
               if (!(chan->chip->flags & DW_EDMA_CHIP_LOCAL))
                               control |= DW_EDMA_V0_RIE;
        }

        if ((chan->chip->flags & DW_EDMA_CHIP_REG32BIT) ||
              !IS_ENABLED(CONFIG_64BIT)) {
          SET_CH_32(...);
          SET_CH_32(...);
       } else {
          SET_CH_64(...);
       }


Change from v1 to v2
- none

 drivers/dma/dw-edma/dw-edma-v0-core.c |  9 ++++++---
 include/linux/dma/edma.h              | 10 ++++++++++
 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index c59e23b9f9fdb..2ab1059a3de1e 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -301,6 +301,7 @@ u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
 static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 {
 	struct dw_edma_burst *child;
+	struct dw_edma_chan *chan = chunk->chan;
 	struct dw_edma_v0_lli __iomem *lli;
 	struct dw_edma_v0_llp __iomem *llp;
 	u32 control = 0, i = 0;
@@ -314,9 +315,11 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 	j = chunk->bursts_alloc;
 	list_for_each_entry(child, &chunk->burst->list, list) {
 		j--;
-		if (!j)
-			control |= (DW_EDMA_V0_LIE | DW_EDMA_V0_RIE);
-
+		if (!j) {
+			control |= DW_EDMA_V0_LIE;
+			if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
+				control |= DW_EDMA_V0_RIE;
+		}
 		/* Channel control */
 		SET_LL_32(&lli[i].control, control);
 		/* Transfer size */
diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h
index c8b479f1d4da7..7baf16fd4f233 100644
--- a/include/linux/dma/edma.h
+++ b/include/linux/dma/edma.h
@@ -33,12 +33,21 @@ enum dw_edma_map_format {
 	EDMA_MF_HDMA_COMPAT = 0x5
 };
 
+/**
+ * enum dw_edma_chip_flags - Flags specific to an eDMA chip
+ * @DW_EDMA_CHIP_LOCAL:		eDMA is used locally by an endpoint
+ */
+enum dw_edma_chip_flags {
+	DW_EDMA_CHIP_LOCAL	= BIT(0),
+};
+
 /**
  * struct dw_edma_chip - representation of DesignWare eDMA controller hardware
  * @dev:		 struct device of the eDMA controller
  * @id:			 instance ID
  * @nr_irqs:		 total dma irq number
  * @ops			 DMA channel to IRQ number mapping
+ * @flags		 dw_edma_chip_flags
  * @reg_base		 DMA register base address
  * @ll_wr_cnt		 DMA write link list count
  * @ll_rd_cnt		 DMA read link list count
@@ -55,6 +64,7 @@ struct dw_edma_chip {
 	int			id;
 	int			nr_irqs;
 	const struct dw_edma_core_ops   *ops;
+	u32			flags;
 
 	void __iomem		*reg_base;
 
-- 
2.35.1


  parent reply	other threads:[~2022-05-03  1:09 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03  0:57 [PATCH v10 0/9] Enable designware PCI EP EDMA locally Frank Li
2022-05-03  0:57 ` [PATCH v10 1/9] dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip Frank Li
2022-05-03  0:57 ` [PATCH v10 2/9] dmaengine: dw-edma: Detach the private data and chip info structures Frank Li
2022-05-03  0:57 ` [PATCH v10 3/9] dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip Frank Li
2022-05-03  0:57 ` [PATCH v10 4/9] dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt " Frank Li
2022-05-03  0:57 ` [PATCH v10 5/9] dmaengine: dw-edma: Drop dma_slave_config.direction field usage Frank Li
2022-05-03  0:57 ` [PATCH v10 6/9] dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics Frank Li
2022-05-03  0:57 ` Frank Li [this message]
2022-05-03  0:58 ` [PATCH v10 8/9] dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific flags Frank Li
2022-05-04 18:43   ` Zhi Li
2022-05-03  0:58 ` [PATCH v10 9/9] PCI: endpoint: Enable DMA controller tests for endpoints with DMA capabilities Frank Li
2022-05-04 19:34   ` Zhi Li
2022-05-11  9:28   ` Lorenzo Pieralisi
2022-05-11 16:18     ` Zhi Li
2022-05-11 17:30       ` Lorenzo Pieralisi
2022-05-11 19:12         ` Zhi Li
2022-05-13  0:48           ` Zhi Li
2022-05-12 13:51   ` Kishon Vijay Abraham I
2022-05-12 15:36     ` Zhi Li
2022-05-03 23:18 ` [PATCH v10 0/9] Enable designware PCI EP EDMA locally Serge Semin
2022-05-10 17:47   ` Lorenzo Pieralisi
2022-05-10 18:02     ` Zhi Li
2022-05-12  0:04     ` Serge Semin
2022-05-12 14:14 ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220503005801.1714345-8-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=helgaas@kernel.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lznuaa@gmail.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).