linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: "Rob Herring" <robh+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Frank Li <Frank.Li@nxp.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 15/20] PCI: dwc: Introduce dma-ranges property support for RC-host
Date: Mon, 22 Aug 2022 21:46:56 +0300	[thread overview]
Message-ID: <20220822184701.25246-16-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20220822184701.25246-1-Sergey.Semin@baikalelectronics.ru>

In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
property has the same format as the "ranges" property. The only difference
is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
property. Even though the DW PCIe controllers are normally equipped with
the internal Address Translation Unit which inbound and outbound tables
can be used to implement both properties semantics, it was surprising for
me to discover that the host-related part of the DW PCIe driver currently
supports the "ranges" property only while the "dma-ranges" windows are
just ignored. Having the "dma-ranges" supported in the driver would be
very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
mapping and require a customized PCIe memory layout. So let's fix that by
introducing the "dma-ranges" property support.

First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
dw_pcie_prog_ep_inbound_atu() and create a new version of the
dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for the
RC and EP controllers respectively in the same way as it has been
developed for the outbound ATU setup methods.

Secondly aside with the memory window index and type the new
dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
and size as its arguments. These parameters define the PCIe and CPU memory
ranges which will be used to setup the respective inbound ATU mapping. The
passed parameters need to be verified against the ATU ranges constraints
in the same way as it is done for the outbound ranges.

Finally the DMA-ranges detected for the PCIe controller need to be
converted to the inbound ATU entries during the host controller
initialization procedure. It will be done in the framework of the
dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
need to disable all the inbound ATU entries in order to prevent unexpected
PCIe TLPs translations defined by some third party software like
bootloaders.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---

Changelog v3:
- Drop inbound iATU window size alignment constraint. (@Manivannan)
---
 .../pci/controller/dwc/pcie-designware-ep.c   |  4 +-
 .../pci/controller/dwc/pcie-designware-host.c | 32 ++++++++++-
 drivers/pci/controller/dwc/pcie-designware.c  | 56 ++++++++++++++++++-
 drivers/pci/controller/dwc/pcie-designware.h  |  6 +-
 4 files changed, 89 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 83ddb190292e..237bb01d7852 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -171,8 +171,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type,
 		return -EINVAL;
 	}
 
-	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, type,
-				       cpu_addr, bar);
+	ret = dw_pcie_prog_ep_inbound_atu(pci, func_no, free_win, type,
+					  cpu_addr, bar);
 	if (ret < 0) {
 		dev_err(pci->dev, "Failed to program IB window\n");
 		return ret;
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 7746f94a715f..f0959a9a4970 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -657,12 +657,15 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 	}
 
 	/*
-	 * Ensure all outbound windows are disabled before proceeding with
-	 * the MEM/IO ranges setups.
+	 * Ensure all out/inbound windows are disabled before proceeding with
+	 * the MEM/IO (dma-)ranges setups.
 	 */
 	for (i = 0; i < pci->num_ob_windows; i++)
 		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
 
+	for (i = 0; i < pci->num_ib_windows; i++)
+		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
+
 	i = 0;
 	resource_list_for_each_entry(entry, &pp->bridge->windows) {
 		if (resource_type(entry->res) != IORESOURCE_MEM)
@@ -699,9 +702,32 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 	}
 
 	if (pci->num_ob_windows <= i)
-		dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
+		dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
 			 pci->num_ob_windows);
 
+	i = 0;
+	resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
+		if (resource_type(entry->res) != IORESOURCE_MEM)
+			continue;
+
+		if (pci->num_ib_windows <= i)
+			break;
+
+		ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
+					       entry->res->start,
+					       entry->res->start - entry->offset,
+					       resource_size(entry->res));
+		if (ret) {
+			dev_err(pci->dev, "Failed to set DMA range %pr\n",
+				entry->res);
+			return ret;
+		}
+	}
+
+	if (pci->num_ib_windows <= i)
+		dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
+			 pci->num_ib_windows);
+
 	return 0;
 }
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index c6725c519a47..ca830ee794a7 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -393,8 +393,60 @@ static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg
 	dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val);
 }
 
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
-			     int type, u64 cpu_addr, u8 bar)
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
+			     u64 cpu_addr, u64 pci_addr, u64 size)
+{
+	u64 limit_addr = pci_addr + size - 1;
+	u32 retries, val;
+
+	if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) ||
+	    !IS_ALIGNED(cpu_addr, pci->region_align) ||
+	    !IS_ALIGNED(pci_addr, pci->region_align) || !size) {
+		return -EINVAL;
+	}
+
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_BASE,
+			      lower_32_bits(pci_addr));
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_BASE,
+			      upper_32_bits(pci_addr));
+
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LIMIT,
+			      lower_32_bits(limit_addr));
+	if (dw_pcie_ver_is_ge(pci, 460A))
+		dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_LIMIT,
+				      upper_32_bits(limit_addr));
+
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_TARGET,
+			      lower_32_bits(cpu_addr));
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_TARGET,
+			      upper_32_bits(cpu_addr));
+
+	val = type;
+	if (upper_32_bits(limit_addr) > upper_32_bits(pci_addr) &&
+	    dw_pcie_ver_is_ge(pci, 460A))
+		val |= PCIE_ATU_INCREASE_REGION_SIZE;
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL1, val);
+	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return 0;
+
+		mdelay(LINK_WAIT_IATU);
+	}
+
+	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
+
+	return -ETIMEDOUT;
+}
+
+int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+				int type, u64 cpu_addr, u8 bar)
 {
 	u32 retries, val;
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 09b887093a84..f1a7f7ef4126 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -347,8 +347,10 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 			      u64 cpu_addr, u64 pci_addr, u64 size);
 int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 				 int type, u64 cpu_addr, u64 pci_addr, u64 size);
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
-			     int type, u64 cpu_addr, u8 bar);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
+			     u64 cpu_addr, u64 pci_addr, u64 size);
+int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+				int type, u64 cpu_addr, u8 bar);
 void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index);
 void dw_pcie_setup(struct dw_pcie *pci);
 void dw_pcie_iatu_detect(struct dw_pcie *pci);
-- 
2.35.1


  parent reply	other threads:[~2022-08-22 18:49 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-22 18:46 [PATCH v5 00/20] PCI: dwc: Add generic resources and Baikal-T1 support Serge Semin
2022-08-22 18:46 ` [PATCH v5 01/20] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq Serge Semin
2022-08-22 21:57   ` Rob Herring
     [not found]   ` <8354660.EvYhyI6sBW@steina-w>
2022-08-25 13:01     ` Serge Semin
2022-08-22 18:46 ` [PATCH v5 02/20] dt-bindings: visconti-pcie: Fix interrupts array max constraints Serge Semin
2022-08-30 21:33   ` Rob Herring
2022-09-01 23:33   ` nobuhiro1.iwamatsu
2022-08-22 18:46 ` [PATCH v5 03/20] dt-bindings: PCI: dwc: Detach common RP/EP DT bindings Serge Semin
2022-08-22 18:46 ` [PATCH v5 04/20] dt-bindings: PCI: dwc: Remove bus node from the examples Serge Semin
2022-08-22 18:46 ` [PATCH v5 05/20] dt-bindings: PCI: dwc: Add phys/phy-names common properties Serge Semin
2022-08-22 21:57   ` Rob Herring
2022-08-25 15:13     ` Serge Semin
2022-08-22 18:46 ` [PATCH v5 06/20] dt-bindings: PCI: dwc: Add max-link-speed common property Serge Semin
2022-08-22 18:46 ` [PATCH v5 07/20] dt-bindings: PCI: dwc: Apply generic schema for generic device only Serge Semin
2022-08-31 21:18   ` Rob Herring
2022-08-22 18:46 ` [PATCH v5 08/20] dt-bindings: PCI: dwc: Add max-functions EP property Serge Semin
2022-08-22 18:46 ` [PATCH v5 09/20] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties Serge Semin
2022-08-31 21:24   ` Rob Herring
2022-09-11 19:02     ` Serge Semin
2022-09-25 22:14       ` Serge Semin
2022-08-22 18:46 ` [PATCH v5 10/20] dt-bindings: PCI: dwc: Add reg/reg-names " Serge Semin
2022-08-22 18:46 ` [PATCH v5 11/20] dt-bindings: PCI: dwc: Add clocks/resets " Serge Semin
2022-08-22 18:46 ` [PATCH v5 12/20] dt-bindings: PCI: dwc: Add dma-coherent property Serge Semin
2022-08-31 21:25   ` Rob Herring
2022-08-22 18:46 ` [PATCH v5 13/20] dt-bindings: PCI: dwc: Apply common schema to Rockchip DW PCIe nodes Serge Semin
2022-08-31 21:26   ` Rob Herring
2022-09-11 19:09     ` Serge Semin
2022-08-22 18:46 ` [PATCH v5 14/20] dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings Serge Semin
2022-08-31 21:28   ` Rob Herring
2022-08-22 18:46 ` Serge Semin [this message]
2022-08-22 18:46 ` [PATCH v5 16/20] PCI: dwc: Introduce generic controller capabilities interface Serge Semin
2022-08-22 18:46 ` [PATCH v5 17/20] PCI: dwc: Introduce generic resources getter Serge Semin
2022-08-23  2:07   ` kernel test robot
2022-08-23  6:30   ` kernel test robot
2022-08-22 18:46 ` [PATCH v5 18/20] PCI: dwc: Combine iATU detection procedures Serge Semin
2022-08-22 18:47 ` [PATCH v5 19/20] PCI: dwc: Introduce generic platform clocks and resets Serge Semin
2022-08-22 18:47 ` [PATCH v5 20/20] PCI: dwc: Add Baikal-T1 PCIe controller support Serge Semin
2022-08-29 15:28   ` Lorenzo Pieralisi
2022-08-29 17:32     ` William McVicker
2022-09-12  0:20       ` Serge Semin
2022-08-31  8:36     ` Robin Murphy
2022-08-31  8:54       ` Robin Murphy
2022-09-12  0:25         ` Serge Semin
2022-09-26 13:09           ` Robin Murphy
2022-09-26 13:31             ` Serge Semin
2022-09-12  0:22       ` Serge Semin
2022-09-12  0:02     ` Serge Semin
2022-09-17 10:44       ` Lorenzo Pieralisi
2022-09-26 10:17       ` Lorenzo Pieralisi
2022-09-26 12:49         ` Serge Semin
2022-09-26 14:31           ` Christoph Hellwig
2022-09-26 20:53             ` Serge Semin
2022-09-26 23:08               ` William McVicker
2022-09-28 10:36                 ` Serge Semin
2022-09-28 17:59                   ` William McVicker
2022-08-29 10:09 ` [PATCH v5 00/20] PCI: dwc: Add generic resources and Baikal-T1 support Lorenzo Pieralisi
2022-09-11 19:14   ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220822184701.25246-16-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).