linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hongxing Zhu <hongxing.zhu@nxp.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "p.zabel@pengutronix.de" <p.zabel@pengutronix.de>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh@kernel.org" <robh@kernel.org>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"vkoul@kernel.org" <vkoul@kernel.org>,
	"alexander.stein@ew.tq-group.com"
	<alexander.stein@ew.tq-group.com>,
	"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	dl-linux-imx <linux-imx@nxp.com>
Subject: RE: [PATCH v2 7/7] PCI: imx6: Add the iMX8MP PCIe support
Date: Fri, 13 May 2022 02:22:29 +0000	[thread overview]
Message-ID: <AS8PR04MB8676765583E72CB09C6CAE878CCA9@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20220512160845.GB2506@lpieralisi>

Hi Lorenzo:

> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: 2022年5月13日 0:09
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: p.zabel@pengutronix.de; l.stach@pengutronix.de; bhelgaas@google.com;
> robh@kernel.org; shawnguo@kernel.org; vkoul@kernel.org;
> alexander.stein@ew.tq-group.com; linux-phy@lists.infradead.org;
> devicetree@vger.kernel.org; linux-pci@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>
> Subject: Re: [PATCH v2 7/7] PCI: imx6: Add the iMX8MP PCIe support
> 
> On Mon, Mar 07, 2022 at 05:07:34PM +0800, Richard Zhu wrote:
> > Add the i.MX8MP PCIe support.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 19 ++++++++++++++++++-
> >  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> I expect this series will eventually go via the imx6 platform tree.
> 
> To avoid you waiting for me when this series is deemed acceptable:
> 
> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> 
> I will mark it as "handled elsewhere" in the PCI tree patchwork.

Thanks for your kindly help.
Lucas has some suggestions and advices about the HSIOMIX bits manipulations
in the PHY driver of this series.
Would issue the next version, after co-operate with Lucas and settle-down
 that part.

Best Regards
Richard
> 
> Lorenzo
> 
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index bb662f90d4f3..4d34f0c88550 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -51,6 +51,7 @@ enum imx6_pcie_variants {
> >  	IMX7D,
> >  	IMX8MQ,
> >  	IMX8MM,
> > +	IMX8MP,
> >  };
> >
> >  #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
> > @@ -379,6 +380,7 @@ static void imx6_pcie_assert_core_reset(struct
> imx6_pcie *imx6_pcie)
> >  		reset_control_assert(imx6_pcie->pciephy_reset);
> >  		fallthrough;
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		reset_control_assert(imx6_pcie->apps_reset);
> >  		break;
> >  	case IMX6SX:
> > @@ -407,7 +409,8 @@ static void imx6_pcie_assert_core_reset(struct
> > imx6_pcie *imx6_pcie)  static unsigned int imx6_pcie_grp_offset(const
> > struct imx6_pcie *imx6_pcie)  {
> >  	WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
> > -		imx6_pcie->drvdata->variant != IMX8MM);
> > +		imx6_pcie->drvdata->variant != IMX8MM &&
> > +		imx6_pcie->drvdata->variant != IMX8MP);
> >  	return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
> > }
> >
> > @@ -448,6 +451,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie
> *imx6_pcie)
> >  		break;
> >  	case IMX8MM:
> >  	case IMX8MQ:
> > +	case IMX8MP:
> >  		ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> >  		if (ret) {
> >  			dev_err(dev, "unable to enable pcie_aux clock\n"); @@ -503,6
> > +507,7 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
> >
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		if (phy_power_on(imx6_pcie->phy))
> >  			dev_err(dev, "unable to power on PHY\n");
> >  		break;
> > @@ -603,6 +608,7 @@ static int imx6_pcie_deassert_core_reset(struct
> imx6_pcie *imx6_pcie)
> >  		reset_control_deassert(imx6_pcie->pciephy_reset);
> >  		break;
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		if (phy_init(imx6_pcie->phy))
> >  			dev_err(dev, "waiting for phy ready timeout!\n");
> >  		break;
> > @@ -678,6 +684,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie
> > *imx6_pcie)  {
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		/*
> >  		 * The PHY initialization had been done in the PHY
> >  		 * driver, break here directly.
> > @@ -823,6 +830,7 @@ static void imx6_pcie_ltssm_enable(struct device
> *dev)
> >  	case IMX7D:
> >  	case IMX8MQ:
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		reset_control_deassert(imx6_pcie->apps_reset);
> >  		break;
> >  	}
> > @@ -938,6 +946,7 @@ static void imx6_pcie_host_exit(struct pcie_port
> *pp)
> >  		imx6_pcie_clk_disable(imx6_pcie);
> >  		switch (imx6_pcie->drvdata->variant) {
> >  		case IMX8MM:
> > +		case IMX8MP:
> >  			if (phy_power_off(imx6_pcie->phy))
> >  				dev_err(dev, "unable to power off phy\n");
> >  			phy_exit(imx6_pcie->phy);
> > @@ -972,6 +981,7 @@ static void imx6_pcie_ltssm_disable(struct device
> *dev)
> >  		break;
> >  	case IMX7D:
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		reset_control_assert(imx6_pcie->apps_reset);
> >  		break;
> >  	default:
> > @@ -1028,6 +1038,7 @@ static int imx6_pcie_suspend_noirq(struct device
> *dev)
> >  	imx6_pcie_clk_disable(imx6_pcie);
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		if (phy_power_off(imx6_pcie->phy))
> >  			dev_err(dev, "unable to power off PHY\n");
> >  		phy_exit(imx6_pcie->phy);
> > @@ -1177,6 +1188,7 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> >  		}
> >  		break;
> >  	case IMX8MM:
> > +	case IMX8MP:
> >  		imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> >  		if (IS_ERR(imx6_pcie->pcie_aux))
> >  			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux), @@
> -1327,6
> > +1339,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> >  		.variant = IMX8MM,
> >  		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> >  	},
> > +	[IMX8MP] = {
> > +		.variant = IMX8MP,
> > +		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> > +	},
> >  };
> >
> >  static const struct of_device_id imx6_pcie_of_match[] = { @@ -1336,6
> > +1352,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> >  	{ .compatible = "fsl,imx7d-pcie",  .data = &drvdata[IMX7D],  },
> >  	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
> >  	{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
> > +	{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
> >  	{},
> >  };
> >
> > --
> > 2.25.1
> >

  reply	other threads:[~2022-05-13  2:22 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-07  9:07 [PATCH v2 0/7] Add the iMX8MP PCIe support Richard Zhu
2022-03-07  9:07 ` [PATCH v2 1/7] reset: imx7: Add the iMX8MP PCIe PHY PERST support Richard Zhu
2022-04-04  9:34   ` Philipp Zabel
2022-04-15  7:32     ` Hongxing Zhu
2022-04-26  3:27       ` Hongxing Zhu
2022-04-14 20:48   ` Lucas Stach
2022-04-18  4:54     ` Hongxing Zhu
2022-03-07  9:07 ` [PATCH v2 2/7] dt-binding: phy: Add iMX8MP PCIe PHY binding Richard Zhu
2022-03-08  1:07   ` Rob Herring
2022-03-10  2:04     ` Hongxing Zhu
2022-03-07  9:07 ` [PATCH v2 3/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support Richard Zhu
2022-03-08 10:04   ` Lucas Stach
2022-03-09  6:05     ` Hongxing Zhu
2022-04-14 20:58   ` Lucas Stach
2022-04-18  4:55     ` Hongxing Zhu
2022-04-27 15:18       ` Lucas Stach
2022-04-28  1:29         ` Hongxing Zhu
2022-05-26  1:32           ` Hongxing Zhu
2022-03-07  9:07 ` [PATCH v2 4/7] dt-bindings: imx6q-pcie: Add iMX8MP PCIe compatible string Richard Zhu
2022-03-10 20:10   ` Rob Herring
2022-03-07  9:07 ` [PATCH v2 5/7] arm64: dts: imx8mp: add the iMX8MP PCIe support Richard Zhu
2022-04-14 21:02   ` Lucas Stach
2022-04-18  4:55     ` Hongxing Zhu
2022-05-23 18:47       ` Tim Harvey
2022-05-24  2:44         ` Hongxing Zhu
2022-03-07  9:07 ` [PATCH v2 6/7] arm64: dts: imx8mp-evk: Add " Richard Zhu
2022-03-24 10:04   ` (EXT) " Alexander Stein
2022-03-28  3:00     ` Hongxing Zhu
2022-04-14 21:04   ` Lucas Stach
2022-04-18  4:55     ` Hongxing Zhu
2022-03-07  9:07 ` [PATCH v2 7/7] PCI: imx6: Add the iMX8MP " Richard Zhu
2022-05-12 16:08   ` Lorenzo Pieralisi
2022-05-13  2:22     ` Hongxing Zhu [this message]
2022-03-09  7:57 ` (EXT) [PATCH v2 0/7] " Alexander Stein
2022-03-10  2:03   ` Hongxing Zhu
2022-04-07 20:41 ` Tim Harvey
2022-04-08  3:14   ` Hongxing Zhu
2022-04-08  8:12     ` Lucas Stach
2022-04-11  3:32       ` Hongxing Zhu
2022-04-13  7:21         ` Lucas Stach
2022-04-13  7:55           ` Hongxing Zhu
2022-04-11 22:18     ` Tim Harvey
2022-04-14 20:45 ` Lucas Stach
2022-04-18  4:54   ` Hongxing Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB8676765583E72CB09C6CAE878CCA9@AS8PR04MB8676.eurprd04.prod.outlook.com \
    --to=hongxing.zhu@nxp.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).