linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Kelley, Sean V" <sean.v.kelley@intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "bhelgaas@google.com" <bhelgaas@google.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	"xerces.zhao@gmail.com" <xerces.zhao@gmail.com>,
	"Wysocki, Rafael J" <rafael.j.wysocki@intel.com>,
	"Raj, Ashok" <ashok.raj@intel.com>,
	"Luck, Tony" <tony.luck@intel.com>,
	"Kuppuswamy,
	Sathyanarayanan" <sathyanarayanan.kuppuswamy@intel.com>,
	"Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>,
	Linux PCI <linux-pci@vger.kernel.org>,
	"Linux List" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v12 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
Date: Mon, 7 Dec 2020 17:23:43 +0000	[thread overview]
Message-ID: <CA3EF234-9944-4847-BC24-BA7C9DC1CB94@intel.com> (raw)
In-Reply-To: <20201205213038.GA2093063@bjorn-Precision-5520>

Hi Bjorn,

> On Dec 5, 2020, at 1:30 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> 
> On Fri, Dec 04, 2020 at 05:17:58PM +0000, Kelley, Sean V wrote:
>>> On Dec 3, 2020, at 4:01 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
>>> On Thu, Dec 03, 2020 at 12:51:40AM +0000, Kelley, Sean V wrote:
>>>>> On Dec 2, 2020, at 3:44 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
>>>>> On Fri, Nov 20, 2020 at 04:10:33PM -0800, Sean V Kelley wrote:
>>>>>> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>>>>> 
>>>>>> When attempting error recovery for an RCiEP associated with an RCEC device,
>>>>>> there needs to be a way to update the Root Error Status, the Uncorrectable
>>>>>> Error Status and the Uncorrectable Error Severity of the parent RCEC.  In
>>>>>> some non-native cases in which there is no OS-visible device associated
>>>>>> with the RCiEP, there is nothing to act upon as the firmware is acting
>>>>>> before the OS.
>>>>>> 
>>>>>> Add handling for the linked RCEC in AER/ERR while taking into account
>>>>>> non-native cases.
>>>>>> 
>>>>>> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
>>>>>> Link: https://lore.kernel.org/r/20201002184735.1229220-12-seanvk.dev@oregontracks.org
>>>>>> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
>>>>>> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>>>>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>>>>>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>>>>> ---
>>>>>> drivers/pci/pcie/aer.c | 46 +++++++++++++++++++++++++++++++-----------
>>>>>> drivers/pci/pcie/err.c | 20 +++++++++---------
>>>>>> 2 files changed, 44 insertions(+), 22 deletions(-)
>>>>>> 
>>>>>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>>>>>> index 0ba0b47ae751..51389a6ee4ca 100644
>>>>>> --- a/drivers/pci/pcie/aer.c
>>>>>> +++ b/drivers/pci/pcie/aer.c
>>>>>> @@ -1358,29 +1358,51 @@ static int aer_probe(struct pcie_device *dev)
>>>>>> */
>>>>>> static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>>>>>> {
>>>>>> -	int aer = dev->aer_cap;
>>>>>> +	int type = pci_pcie_type(dev);
>>>>>> +	struct pci_dev *root;
>>>>>> +	int aer = 0;
>>>>>> +	int rc = 0;
>>>>>> 	u32 reg32;
>>>>>> -	int rc;
>>>>>> 
>>>>>> -	if (pcie_aer_is_native(dev)) {
>>>>>> +	if (type == PCI_EXP_TYPE_RC_END)
>>>>>> +		/*
>>>>>> +		 * The reset should only clear the Root Error Status
>>>>>> +		 * of the RCEC. Only perform this for the
>>>>>> +		 * native case, i.e., an RCEC is present.
>>>>>> +		 */
>>>>>> +		root = dev->rcec;
>>>>>> +	else
>>>>>> +		root = dev;
>>>>>> +
>>>>>> +	if (root)
>>>>>> +		aer = dev->aer_cap;
>>>>>> +
>>>>>> +	if ((aer) && pcie_aer_is_native(dev)) {
>>>>>> 		/* Disable Root's interrupt in response to error messages */
>>>>>> -		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>>>>>> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>>>>>> 		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
>>>>>> -		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>>>>>> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
>>>>>> 	}
>>>>>> 
>>>>>> -	rc = pci_bus_error_reset(dev);
>>>>>> -	pci_info(dev, "Root Port link has been reset (%d)\n", rc);
>>>>>> +	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
>>>>>> +		if (pcie_has_flr(dev)) {
>>>>>> +			rc = pcie_flr(dev);
>>>>>> +			pci_info(dev, "has been reset (%d)\n", rc);
>>>>> 
>>>>> Maybe:
>>>>> 
>>>>> +             } else {
>>>>> +                     rc = -ENOTTY;
>>>>> +                     pci_info(dev, "not reset (no FLR support)\n");
>>>>> 
>>>>> Or do we want to pretend the device was reset and return
>>>>> PCI_ERS_RESULT_RECOVERED?
>>>> 
>>>> We are currently doing the latter now with the default of rc = 0
>>>> above and so  I’m not sure the extra detail here on the absence of
>>>> FLR support is of value.
>>> 
>>> So to make sure I understand the proposal here, for RCECs and RCiEPs
>>> that don't support FLR, you're saying you want to continue silently
>>> and return PCI_ERS_RESULT_RECOVERED and let the drivers assume their
>>> device was reset when it was not?
>> 
>> The setting of the ‘rc’ on the FLR support is fine to add to the
>> else condition.  I had simply recalled in earlier discussion that
>> pcie_has_flr() was needed due to quirky behavior in some hardware
>> and so was not sure that detail of having or not having flr was in
>> fact consitent/accurate.
> 
> I think we should do the following, unless you object:
> 
>    if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
> 	    if (pcie_has_flr(dev)) {
> 		    rc = pcie_flr(dev);
> 		    pci_info(dev, "has been reset (%d)\n", rc);
> 	    } else {
> 		    pci_info(dev, "not reset (no FLR support)\n");
> 		    rc = -ENOTTY;
> 	    }
>    } else {
> 	    rc = pci_bus_error_reset(dev);
> 	    pci_info(dev, "Root Port link has been reset (%d)\n", rc);
>    }
>    ...
>    return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
> 
> Sorry, I should have done that in the proposed patch earlier; it's
> what I was *thinking* but didn't get it transcribed into the code.


Looks good to me.

Thanks,

Sean


> 
> Bjorn


  reply	other threads:[~2020-12-07 17:24 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-21  0:10 [PATCH v12 00/15] Add RCEC handling to PCI/AER Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 01/15] AER: aer_root_reset() non-native handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 02/15] PCI/RCEC: Bind RCEC devices to the Root Port driver Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 03/15] PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 04/15] PCI/ERR: Rename reset_link() to reset_subordinates() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 05/15] PCI/ERR: Simplify by using pci_upstream_bridge() Sean V Kelley
2020-12-03 18:45   ` Kelley, Sean V
2020-12-03 22:25     ` Bjorn Helgaas
2020-11-21  0:10 ` [PATCH v12 06/15] PCI/ERR: Simplify by computing pci_pcie_type() once Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() Sean V Kelley
2020-12-02 23:18   ` Bjorn Helgaas
2020-11-21  0:10 ` [PATCH v12 08/15] PCI/ERR: Avoid negated conditional for clarity Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 09/15] PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 10/15] PCI/ERR: Limit AER resets in pcie_do_recovery() Sean V Kelley
2020-11-23 23:28   ` Bjorn Helgaas
2020-11-23 23:57     ` Kelley, Sean V
2020-11-24 17:17       ` Bjorn Helgaas
2020-11-30 19:54         ` Kelley, Sean V
2020-12-01  0:25           ` Bjorn Helgaas
2020-12-01  1:09             ` Kuppuswamy, Sathyanarayanan
2020-12-01  1:13             ` Kelley, Sean V
2020-12-02 20:53             ` Kelley, Sean V
2020-12-02 21:27               ` Bjorn Helgaas
2020-12-02 22:54                 ` Kelley, Sean V
2020-11-21  0:10 ` [PATCH v12 11/15] PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR Sean V Kelley
2020-12-02 23:44   ` Bjorn Helgaas
2020-12-03  0:51     ` Kelley, Sean V
2020-12-04  0:01       ` Bjorn Helgaas
2020-12-04 17:17         ` Kelley, Sean V
2020-12-04 17:24           ` Bjorn Helgaas
2020-12-05 21:30           ` Bjorn Helgaas
2020-12-07 17:23             ` Kelley, Sean V [this message]
2020-11-21  0:10 ` [PATCH v12 13/15] PCI/AER: Add pcie_walk_rcec() to RCEC AER handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 14/15] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 15/15] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-11-21  4:26 ` [PATCH v12 00/15] Add RCEC handling to PCI/AER Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA3EF234-9944-4847-BC24-BA7C9DC1CB94@intel.com \
    --to=sean.v.kelley@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=tony.luck@intel.com \
    --cc=xerces.zhao@gmail.com \
    --subject='Re: [PATCH v12 12/15] PCI/RCEC: Add RCiEP'\''s linked RCEC to AER/ERR' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).