From: Han Nandor <nandor.han@vaisala.com>
To: "sre@kernel.org" <sre@kernel.org>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: Han Nandor <nandor.han@vaisala.com>
Subject: [PATCH v4 0/2] Use NVMEM as reboot-mode write interface
Date: Wed, 15 May 2019 10:47:14 +0000 [thread overview]
Message-ID: <20190515104658.25535-1-nandor.han@vaisala.com> (raw)
Message-ID: <20190515104714.aYXJ2VZPTsExZfInB7i4JhXYNHErLOdmEPpI6Xnnc4Y@z> (raw)
Description
-----------
Extend the reboot mode driver to use a NVMEM cell as writing interface.
Testing
-------
The testing is done by configuring DT from a custom board.
The NVMEM cell is configured in an RTC non-volatile memory.
Kernel: 4.14.60 (the patchset was rebased on kernel master)
DT configurations:
`
...
reboot-mode-nvmem@0 {
compatible = "simple-mfd";
reboot-mode {
compatible = "nvmem-reboot-mode";
nvmem-cells = <&reboot_mode>;
nvmem-cell-names = "reboot-mode";
mode-test = <0x21969147>;
};
};
...
reboot_mode: nvmem_reboot_mode@0 {
reg = <0x00 0x4>;
};
...
`
1. Reboot the system using the command `reboot test`
2. Verify that kernel logs show that reboot was done in mode `test`:
PASS
`[ 413.957172] reboot: Restarting system with command 'test' `
3. Stop in U-Boot and verify that mode `test` magic value is present
in RTCs non-volatile memory: PASS
Kernel: 5.1.0-rc3
1. Configure `arch/arm/configs/imx_v6_v7_defconfig` to contain
`CONFIG_NVMEM_REBOOT_MODE=y`
2. Verify that Kernel compiles successful: PASS
`
make ARCH=arm CROSS_COMPILE=arm-linux-gnu- imx_v6_v7_defconfig zImage
...
CC drivers/power/reset/nvmem-reboot-mode.o
...
Kernel: arch/arm/boot/zImage is ready
`
Changes since v1:
-----------------
- split the documentation on a separate patch
- add a missing header
Changes since v2:
----------------
- change the module license to GPL since GPL v2 is deprecated
Changes since v3:
----------------
- documentation updated according to the comments
Nandor Han (2):
power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write
interface
dt-bindings: power: reset: add document for NVMEM based reboot-mode
.../power/reset/nvmem-reboot-mode.txt | 26 +++++++
drivers/power/reset/Kconfig | 9 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/nvmem-reboot-mode.c | 76 +++++++++++++++++++
4 files changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
create mode 100644 drivers/power/reset/nvmem-reboot-mode.c
--
2.17.2
next reply other threads:[~2019-05-15 10:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 10:47 Han Nandor [this message]
2019-05-15 10:47 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
2019-05-15 10:47 ` [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode " Han Nandor
2019-05-15 10:47 ` Han Nandor
2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
2019-05-15 10:47 ` Han Nandor
2019-06-13 21:02 ` Rob Herring
2019-06-27 18:33 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Sebastian Reichel
2019-06-28 4:49 ` Nandor Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190515104658.25535-1-nandor.han@vaisala.com \
--to=nandor.han@vaisala.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).