Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/6] Add RSC power domain support
@ 2019-08-23  8:16 Maulik Shah
  2019-08-23  8:16 ` [PATCH v2 1/6] drivers: qcom: rpmh: fix macro to accept NULL argument Maulik Shah
                   ` (5 more replies)
  0 siblings, 6 replies; 11+ messages in thread
From: Maulik Shah @ 2019-08-23  8:16 UTC (permalink / raw)
  To: swboyd, agross, david.brown, linux-arm-msm
  Cc: linux-kernel, linux-pm, bjorn.andersson, evgreen, dianders,
	rnayak, ilina, lsrao, ulf.hansson, Maulik Shah

Changes in v2:
- Add Stephen's Reviewed-By to the first three patches
- Addressed Stephen's comments on fourth patch
- Include changes to connect rpmh domain to cpuidle and genpds

Resource State Coordinator (RSC) is responsible for powering off/lowering
the requirements from CPU subsystem for the associated hardware like buses,
clocks, and regulators when all CPUs and cluster is powered down.

RSC power domain uses last-man activities provided by genpd framework based on
Ulf Hansoon's patch series[1], when the cluster of CPUs enter deepest idle
states. As a part of domain poweroff, RSC can lower resource state requirements
by flushing the cached sleep and wake state votes for resources.

Dependencies:

[1] https://lkml.org/lkml/2019/5/13/839

Maulik Shah (6):
  drivers: qcom: rpmh: fix macro to accept NULL argument
  drivers: qcom: rpmh: remove rpmh_flush export
  dt-bindings: soc: qcom: Add RSC power domain specifier
  drivers: qcom: rpmh-rsc: Add RSC power domain support
  arm64: dts: Convert to the hierarchical CPU topology layout for sdm845
  arm64: dts: Add rsc power domain for sdm845

 .../devicetree/bindings/soc/qcom/rpmh-rsc.txt |   8 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 105 +++++++++++++-----
 drivers/soc/qcom/rpmh-internal.h              |   3 +
 drivers/soc/qcom/rpmh-rsc.c                   |  84 ++++++++++++++
 drivers/soc/qcom/rpmh.c                       |  22 ++--
 include/soc/qcom/rpmh.h                       |   5 -
 6 files changed, 185 insertions(+), 42 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation.


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-23  8:16 [PATCH v2 0/6] Add RSC power domain support Maulik Shah
2019-08-23  8:16 ` [PATCH v2 1/6] drivers: qcom: rpmh: fix macro to accept NULL argument Maulik Shah
2019-08-23  8:16 ` [PATCH v2 2/6] drivers: qcom: rpmh: remove rpmh_flush export Maulik Shah
2019-08-23  8:17 ` [PATCH v2 3/6] dt-bindings: soc: qcom: Add RSC power domain specifier Maulik Shah
2019-08-27 22:32   ` Rob Herring
2019-09-03  8:44     ` Maulik Shah
2019-08-23  8:17 ` [PATCH v2 4/6] drivers: qcom: rpmh-rsc: Add RSC power domain support Maulik Shah
2019-09-05 17:32   ` Stephen Boyd
2019-08-23  8:17 ` [PATCH v2 5/6] arm64: dts: Convert to the hierarchical CPU topology layout for sdm845 Maulik Shah
2019-08-23  8:17 ` [PATCH v2 6/6] arm64: dts: Add rsc power domain " Maulik Shah
2019-09-05 17:33   ` Stephen Boyd

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git