[PATCH v3] pwm: bcm-iproc: handle clk_get_rate() return

[PATCH v3] pwm: bcm-iproc: handle clk_get_rate() return

[Scott Branden]

From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>

Handle clk_get_rate() returning 0 to avoid possible division by zero.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-off-by: Ray Jui <ray.jui@broadcom.com>

---
Changes from v2: update commit message to remove <= condition
as clk_get_rate only returns value >= 0
---
 drivers/pwm/pwm-bcm-iproc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
index 1f829edd8ee7..d392a828fc49 100644
--- a/drivers/pwm/pwm-bcm-iproc.c
+++ b/drivers/pwm/pwm-bcm-iproc.c
@@ -85,8 +85,6 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	u64 tmp, multi, rate;
 	u32 value, prescale;
 
-	rate = clk_get_rate(ip->clk);
-
 	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
 
 	if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
@@ -99,6 +97,13 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	else
 		state->polarity = PWM_POLARITY_INVERSED;
 
+	rate = clk_get_rate(ip->clk);
+	if (rate == 0) {
+		state->period = 0;
+		state->duty_cycle = 0;
+		return;
+	}
+
 	value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
 	prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
 	prescale &= IPROC_PWM_PRESCALE_MAX;
-- 
2.17.1

Re: [PATCH v3] pwm: bcm-iproc: handle clk_get_rate() return

[Ray Jui]

On 7/17/2020 4:19 PM, Scott Branden wrote:
> From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> 
> Handle clk_get_rate() returning 0 to avoid possible division by zero.
> 
> Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> Signed-off-by: Scott Branden <scott.branden@broadcom.com>
> Reviewed-off-by: Ray Jui <ray.jui@broadcom.com>

Typo. Should be 'Reviewed-by: Ray Jui <ray.jui@broadcom.com>', :)

> 
> ---
> Changes from v2: update commit message to remove <= condition
> as clk_get_rate only returns value >= 0
> ---
>  drivers/pwm/pwm-bcm-iproc.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
> index 1f829edd8ee7..d392a828fc49 100644
> --- a/drivers/pwm/pwm-bcm-iproc.c
> +++ b/drivers/pwm/pwm-bcm-iproc.c
> @@ -85,8 +85,6 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
>  	u64 tmp, multi, rate;
>  	u32 value, prescale;
>  
> -	rate = clk_get_rate(ip->clk);
> -
>  	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
>  
>  	if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
> @@ -99,6 +97,13 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
>  	else
>  		state->polarity = PWM_POLARITY_INVERSED;
>  
> +	rate = clk_get_rate(ip->clk);
> +	if (rate == 0) {
> +		state->period = 0;
> +		state->duty_cycle = 0;
> +		return;
> +	}
> +
>  	value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
>  	prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
>  	prescale &= IPROC_PWM_PRESCALE_MAX;
>