* [PATCH v4 1/4] dt-bindings: pwm: Add StarFive PWM module
2023-06-01 8:51 [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
@ 2023-06-01 8:51 ` William Qiu
2023-06-01 8:51 ` [PATCH v4 2/4] pwm: starfive: Add PWM driver support William Qiu
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: William Qiu @ 2023-06-01 8:51 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng, William Qiu
Add documentation to describe StarFive Pulse Width Modulation
controller driver.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
.../bindings/pwm/starfive,jh7100-pwm.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml b/Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
new file mode 100644
index 000000000000..6f1937beb962
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/starfive,jh7100-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 and JH7110 PWM controller
+
+maintainers:
+ - William Qiu <william.qiu@starfivetech.com>
+
+description:
+ StarFive SoCs contain PWM and when operating in PWM mode, the PTC core generates
+ binary signal with user-programmable low and high periods. Clock source for the
+ PWM can be either system clock or external clock. Each PWM timer block provides 8
+ PWM channels.
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ enum:
+ - starfive,jh7100-pwm
+ - starfive,jh7110-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@12490000 {
+ compatible = "starfive,jh7100-pwm";
+ reg = <0x12490000 0x10000>;
+ clocks = <&clkgen 181>;
+ resets = <&rstgen 109>;
+ #pwm-cells = <3>;
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 2/4] pwm: starfive: Add PWM driver support
2023-06-01 8:51 [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
2023-06-01 8:51 ` [PATCH v4 1/4] dt-bindings: pwm: Add StarFive PWM module William Qiu
@ 2023-06-01 8:51 ` William Qiu
2023-06-01 8:51 ` [PATCH v4 3/4] riscv: dts: starfive: jh7110: Add PWM node and pins configuration William Qiu
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: William Qiu @ 2023-06-01 8:51 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng, William Qiu
Add Pulse Width Modulation driver support for StarFive
JH7100 and JH7110 SoC.
Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
MAINTAINERS | 7 ++
drivers/pwm/Kconfig | 9 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-starfive-ptc.c | 192 +++++++++++++++++++++++++++++++++
4 files changed, 209 insertions(+)
create mode 100644 drivers/pwm/pwm-starfive-ptc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 27ef11624748..34d69e9ce444 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20112,6 +20112,13 @@ F: drivers/pinctrl/starfive/pinctrl-starfive-jh71*
F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
F: include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
+STARFIVE JH71X0 PWM DRIVERS
+M: William Qiu <william.qiu@starfivetech.com>
+M: Hal Feng <hal.feng@starfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
+F: drivers/pwm/pwm-starfive-ptc.c
+
STARFIVE JH71X0 RESET CONTROLLER DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
M: Hal Feng <hal.feng@starfivetech.com>
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 8df861b1f4a3..df2bc4ce3f1f 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -548,6 +548,15 @@ config PWM_SPRD
To compile this driver as a module, choose M here: the module
will be called pwm-sprd.
+config PWM_STARFIVE_PTC
+ tristate "StarFive PWM PTC support"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ help
+ Generic PWM framework driver for StarFive SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-starfive-ptc.
+
config PWM_STI
tristate "STiH4xx PWM support"
depends on ARCH_STI || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 19899b912e00..994104aaa9b4 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
obj-$(CONFIG_PWM_SL28CPLD) += pwm-sl28cpld.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o
+obj-$(CONFIG_PWM_STARFIVE_PTC) += pwm-starfive-ptc.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
diff --git a/drivers/pwm/pwm-starfive-ptc.c b/drivers/pwm/pwm-starfive-ptc.c
new file mode 100644
index 000000000000..57b5736f6732
--- /dev/null
+++ b/drivers/pwm/pwm-starfive-ptc.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PWM driver for the StarFive JH71x0 SoC
+ *
+ * Copyright (C) 2018-2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+/* Access PTC register (CNTR, HRC, LRC and CTRL) */
+#define REG_PTC_BASE_ADDR_SUB(base, N) \
+((base) + (((N) > 3) ? (((N) % 4) * 0x10 + (1 << 15)) : ((N) * 0x10)))
+#define REG_PTC_RPTC_CNTR(base, N) (REG_PTC_BASE_ADDR_SUB(base, N))
+#define REG_PTC_RPTC_HRC(base, N) (REG_PTC_BASE_ADDR_SUB(base, N) + 0x4)
+#define REG_PTC_RPTC_LRC(base, N) (REG_PTC_BASE_ADDR_SUB(base, N) + 0x8)
+#define REG_PTC_RPTC_CTRL(base, N) (REG_PTC_BASE_ADDR_SUB(base, N) + 0xC)
+
+/* PTC_RPTC_CTRL register bits*/
+#define PTC_EN BIT(0)
+#define PTC_ECLK BIT(1)
+#define PTC_NEC BIT(2)
+#define PTC_OE BIT(3)
+#define PTC_SIGNLE BIT(4)
+#define PTC_INTE BIT(5)
+#define PTC_INT BIT(6)
+#define PTC_CNTRRST BIT(7)
+#define PTC_CAPTE BIT(8)
+
+struct starfive_pwm_ptc_device {
+ struct pwm_chip chip;
+ struct clk *clk;
+ struct reset_control *rst;
+ void __iomem *regs;
+ u32 clk_rate; /* PWM APB clock frequency */
+};
+
+static inline
+struct starfive_pwm_ptc_device *chip_to_starfive_ptc(struct pwm_chip *c)
+{
+ return container_of(c, struct starfive_pwm_ptc_device, chip);
+}
+
+static int starfive_pwm_ptc_get_state(struct pwm_chip *chip,
+ struct pwm_device *dev,
+ struct pwm_state *state)
+{
+ struct starfive_pwm_ptc_device *pwm = chip_to_starfive_ptc(chip);
+ u32 period_data, duty_data, ctrl_data;
+
+ period_data = readl(REG_PTC_RPTC_LRC(pwm->regs, dev->hwpwm));
+ duty_data = readl(REG_PTC_RPTC_HRC(pwm->regs, dev->hwpwm));
+ ctrl_data = readl(REG_PTC_RPTC_CTRL(pwm->regs, dev->hwpwm));
+
+ state->period = DIV_ROUND_CLOSEST_ULL((u64)period_data * NSEC_PER_SEC, pwm->clk_rate);
+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL((u64)duty_data * NSEC_PER_SEC, pwm->clk_rate);
+ state->polarity = PWM_POLARITY_INVERSED;
+ state->enabled = (ctrl_data & PTC_EN) ? true : false;
+
+ return 0;
+}
+
+static int starfive_pwm_ptc_apply(struct pwm_chip *chip,
+ struct pwm_device *dev,
+ const struct pwm_state *state)
+{
+ struct starfive_pwm_ptc_device *pwm = chip_to_starfive_ptc(chip);
+ u32 period_data, duty_data, ctrl_data = 0;
+
+ if (state->polarity != PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ period_data = DIV_ROUND_CLOSEST_ULL(state->period * pwm->clk_rate,
+ NSEC_PER_SEC);
+ duty_data = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * pwm->clk_rate,
+ NSEC_PER_SEC);
+
+ writel(period_data, REG_PTC_RPTC_LRC(pwm->regs, dev->hwpwm));
+ writel(duty_data, REG_PTC_RPTC_HRC(pwm->regs, dev->hwpwm));
+ writel(0, REG_PTC_RPTC_CNTR(pwm->regs, dev->hwpwm));
+
+ ctrl_data = readl(REG_PTC_RPTC_CTRL(pwm->regs, dev->hwpwm));
+ if (state->enabled)
+ writel(ctrl_data | PTC_EN | PTC_OE, REG_PTC_RPTC_CTRL(pwm->regs, dev->hwpwm));
+ else
+ writel(ctrl_data & ~(PTC_EN | PTC_OE), REG_PTC_RPTC_CTRL(pwm->regs, dev->hwpwm));
+
+ return 0;
+}
+
+static const struct pwm_ops starfive_pwm_ptc_ops = {
+ .get_state = starfive_pwm_ptc_get_state,
+ .apply = starfive_pwm_ptc_apply,
+ .owner = THIS_MODULE,
+};
+
+static int starfive_pwm_ptc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct starfive_pwm_ptc_device *pwm;
+ struct pwm_chip *chip;
+ int ret;
+
+ pwm = devm_kzalloc(dev, sizeof(*pwm), GFP_KERNEL);
+ if (!pwm)
+ return -ENOMEM;
+
+ chip = &pwm->chip;
+ chip->dev = dev;
+ chip->ops = &starfive_pwm_ptc_ops;
+ chip->npwm = 8;
+ chip->of_pwm_n_cells = 3;
+
+ pwm->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pwm->regs))
+ return dev_err_probe(dev, PTR_ERR(pwm->regs),
+ "Unable to map IO resources\n");
+
+ pwm->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pwm->clk))
+ return dev_err_probe(dev, PTR_ERR(pwm->clk),
+ "Unable to get pwm's clock\n");
+
+ pwm->rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(pwm->rst))
+ return dev_err_probe(dev, PTR_ERR(pwm->rst),
+ "Unable to get pwm's reset\n");
+
+ ret = clk_prepare_enable(pwm->clk);
+ if (ret) {
+ dev_err(dev,
+ "Failed to enable clock for pwm: %d\n", ret);
+ return ret;
+ }
+
+ reset_control_deassert(pwm->rst);
+
+ pwm->clk_rate = clk_get_rate(pwm->clk);
+ if (pwm->clk_rate <= 0) {
+ dev_warn(dev, "Failed to get APB clock rate\n");
+ return -EINVAL;
+ }
+
+ ret = devm_pwmchip_add(dev, chip);
+ if (ret < 0) {
+ dev_err(dev, "Cannot register PTC: %d\n", ret);
+ clk_disable_unprepare(pwm->clk);
+ reset_control_assert(pwm->rst);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pwm);
+
+ return 0;
+}
+
+static int starfive_pwm_ptc_remove(struct platform_device *dev)
+{
+ struct starfive_pwm_ptc_device *pwm = platform_get_drvdata(dev);
+
+ reset_control_assert(pwm->rst);
+ clk_disable_unprepare(pwm->clk);
+
+ return 0;
+}
+
+static const struct of_device_id starfive_pwm_ptc_of_match[] = {
+ { .compatible = "starfive,jh7100-pwm" },
+ { .compatible = "starfive,jh7110-pwm" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_pwm_ptc_of_match);
+
+static struct platform_driver starfive_pwm_ptc_driver = {
+ .probe = starfive_pwm_ptc_probe,
+ .remove = starfive_pwm_ptc_remove,
+ .driver = {
+ .name = "pwm-starfive-ptc",
+ .of_match_table = starfive_pwm_ptc_of_match,
+ },
+};
+module_platform_driver(starfive_pwm_ptc_driver);
+
+MODULE_AUTHOR("Jieqin Chen");
+MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive PWM PTC driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 3/4] riscv: dts: starfive: jh7110: Add PWM node and pins configuration
2023-06-01 8:51 [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
2023-06-01 8:51 ` [PATCH v4 1/4] dt-bindings: pwm: Add StarFive PWM module William Qiu
2023-06-01 8:51 ` [PATCH v4 2/4] pwm: starfive: Add PWM driver support William Qiu
@ 2023-06-01 8:51 ` William Qiu
2023-06-01 8:51 ` [PATCH v4 4/4] riscv: dts: starfive: jh7100: " William Qiu
2023-06-27 7:46 ` [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
4 siblings, 0 replies; 7+ messages in thread
From: William Qiu @ 2023-06-01 8:51 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng, William Qiu
Add StarFive JH7110 PWM controller node and add PWM pins configuration
on VisionFive 2 board.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 22 +++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 ++++++++
2 files changed, 31 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 2a6d81609284..bbc2531999bc 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -126,6 +126,12 @@ &i2c6 {
status = "okay";
};
+&ptc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&sysgpio {
i2c0_pins: i2c0-0 {
i2c-pins {
@@ -183,6 +189,22 @@ GPOEN_SYS_I2C6_DATA,
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+ GPOEN_SYS_PWM0_CHANNEL0,
+ GPI_NONE)>,
+ <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+ GPOEN_SYS_PWM0_CHANNEL1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
uart0_pins: uart0-0 {
tx-pins {
pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..a82b81d07d88 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -440,6 +440,15 @@ i2c6: i2c@12060000 {
status = "disabled";
};
+ ptc: pwm@120d0000 {
+ compatible = "starfive,jh7110-pwm";
+ reg = <0x0 0x120d0000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_PWM_APB>;
+ resets = <&syscrg JH7110_SYSRST_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
syscrg: clock-controller@13020000 {
compatible = "starfive,jh7110-syscrg";
reg = <0x0 0x13020000 0x0 0x10000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 4/4] riscv: dts: starfive: jh7100: Add PWM node and pins configuration
2023-06-01 8:51 [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
` (2 preceding siblings ...)
2023-06-01 8:51 ` [PATCH v4 3/4] riscv: dts: starfive: jh7110: Add PWM node and pins configuration William Qiu
@ 2023-06-01 8:51 ` William Qiu
2023-06-27 7:46 ` [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
4 siblings, 0 replies; 7+ messages in thread
From: William Qiu @ 2023-06-01 8:51 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng, William Qiu
Add StarFive JH7100 PWM controller node and add PWM pins configuration
on VisionFive 2 board.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
.../boot/dts/starfive/jh7100-common.dtsi | 24 +++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7100.dtsi | 9 +++++++
2 files changed, 33 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index b93ce351a90f..746867b882b0 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -84,6 +84,24 @@ GPO_I2C2_PAD_SDA_OEN,
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(7,
+ GPO_PWM_PAD_OUT_BIT0,
+ GPO_PWM_PAD_OE_N_BIT0,
+ GPI_NONE)>,
+ <GPIOMUX(5,
+ GPO_PWM_PAD_OUT_BIT1,
+ GPO_PWM_PAD_OE_N_BIT1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
uart3_pins: uart3-0 {
rx-pins {
pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -154,6 +172,12 @@ &osc_aud {
clock-frequency = <27000000>;
};
+&ptc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 000447482aca..977a509ffbdd 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -238,5 +238,14 @@ i2c3: i2c@12460000 {
#size-cells = <0>;
status = "disabled";
};
+
+ ptc: pwm@12490000 {
+ compatible = "starfive,jh7100-pwm";
+ reg = <0x0 0x12490000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_PWM_APB>;
+ resets = <&rstgen JH7100_RSTN_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support
2023-06-01 8:51 [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
` (3 preceding siblings ...)
2023-06-01 8:51 ` [PATCH v4 4/4] riscv: dts: starfive: jh7100: " William Qiu
@ 2023-06-27 7:46 ` William Qiu
2023-07-24 10:16 ` William Qiu
4 siblings, 1 reply; 7+ messages in thread
From: William Qiu @ 2023-06-27 7:46 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng
On 2023/6/1 16:51, William Qiu wrote:
> Hi,
>
> This patchset adds initial rudimentary support for the StarFive
> Pulse Width Modulation controller driver. And this driver will
> be used in StarFive's VisionFive 2 board.The first patch add
> Documentations for the device and Patch 2 adds device probe for
> the module.
>
> Changes v2->v3:
> - Rebased to v6.4rc3.
> - Sorted the header files in alphabetic order.
> - Changed iowrite32() to writel().
> - Added a way to turn off.
> - Moified polarity inversion implementation.
> - Added 7100 support.
> - Added dts patches.
> - Used the various helpers in linux/math.h.
> - Corrected formatting problems.
> - Renamed dtbinding to 'starfive,jh7100-pwm.yaml'.
> - Dropped the redundant code.
>
> Changes v2->v3:
> - Fixed some formatting issues.
>
> Changes v1->v2:
> - Renamed the dt-binding 'pwm-starfive.yaml' to 'starfive,jh7110-pwm.yaml'.
> - Dropped the compatible's Items.
> - Dropped the unuse defines.
> - Modified the code to follow the Linux coding style.
> - Changed return value to dev_err_probe.
> - Dropped the unnecessary local variable.
>
> The patch series is based on v6.4rc3.
>
> William Qiu (4):
> dt-bindings: pwm: Add StarFive PWM module
> pwm: starfive: Add PWM driver support
> riscv: dts: starfive: jh7110: Add PWM node and pins configuration
> riscv: dts: starfive: jh7100: Add PWM node and pins configuration
>
> .../bindings/pwm/starfive,jh7100-pwm.yaml | 55 +++++
> MAINTAINERS | 7 +
> .../boot/dts/starfive/jh7100-common.dtsi | 24 +++
> arch/riscv/boot/dts/starfive/jh7100.dtsi | 9 +
> .../jh7110-starfive-visionfive-2.dtsi | 22 ++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 +
> drivers/pwm/Kconfig | 9 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-starfive-ptc.c | 192 ++++++++++++++++++
> 9 files changed, 328 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
> create mode 100644 drivers/pwm/pwm-starfive-ptc.c
>
> --
> 2.34.1
>
Hi everyone,
Could you please help me review this patch series to see if there is
anything that needs to be modified?
Thanks for taking time to review this patch series.
Best Regards,
William
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support
2023-06-27 7:46 ` [PATCH v4 0/4] StarFive's Pulse Width Modulation driver support William Qiu
@ 2023-07-24 10:16 ` William Qiu
0 siblings, 0 replies; 7+ messages in thread
From: William Qiu @ 2023-07-24 10:16 UTC (permalink / raw)
To: devicetree, linux-pwm, linux-kernel, linux-riscv
Cc: Thierry Reding, Philipp Zabel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Emil Renner Berthing, Hal Feng
On 2023/6/27 15:46, William Qiu wrote:
>
>
> On 2023/6/1 16:51, William Qiu wrote:
>> Hi,
>>
>> This patchset adds initial rudimentary support for the StarFive
>> Pulse Width Modulation controller driver. And this driver will
>> be used in StarFive's VisionFive 2 board.The first patch add
>> Documentations for the device and Patch 2 adds device probe for
>> the module.
>>
>> Changes v2->v3:
>> - Rebased to v6.4rc3.
>> - Sorted the header files in alphabetic order.
>> - Changed iowrite32() to writel().
>> - Added a way to turn off.
>> - Moified polarity inversion implementation.
>> - Added 7100 support.
>> - Added dts patches.
>> - Used the various helpers in linux/math.h.
>> - Corrected formatting problems.
>> - Renamed dtbinding to 'starfive,jh7100-pwm.yaml'.
>> - Dropped the redundant code.
>>
>> Changes v2->v3:
>> - Fixed some formatting issues.
>>
>> Changes v1->v2:
>> - Renamed the dt-binding 'pwm-starfive.yaml' to 'starfive,jh7110-pwm.yaml'.
>> - Dropped the compatible's Items.
>> - Dropped the unuse defines.
>> - Modified the code to follow the Linux coding style.
>> - Changed return value to dev_err_probe.
>> - Dropped the unnecessary local variable.
>>
>> The patch series is based on v6.4rc3.
>>
>> William Qiu (4):
>> dt-bindings: pwm: Add StarFive PWM module
>> pwm: starfive: Add PWM driver support
>> riscv: dts: starfive: jh7110: Add PWM node and pins configuration
>> riscv: dts: starfive: jh7100: Add PWM node and pins configuration
>>
>> .../bindings/pwm/starfive,jh7100-pwm.yaml | 55 +++++
>> MAINTAINERS | 7 +
>> .../boot/dts/starfive/jh7100-common.dtsi | 24 +++
>> arch/riscv/boot/dts/starfive/jh7100.dtsi | 9 +
>> .../jh7110-starfive-visionfive-2.dtsi | 22 ++
>> arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 +
>> drivers/pwm/Kconfig | 9 +
>> drivers/pwm/Makefile | 1 +
>> drivers/pwm/pwm-starfive-ptc.c | 192 ++++++++++++++++++
>> 9 files changed, 328 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
>> create mode 100644 drivers/pwm/pwm-starfive-ptc.c
>>
>> --
>> 2.34.1
>>
> Hi everyone,
>
> Could you please help me review this patch series to see if there is
> anything that needs to be modified?
> Thanks for taking time to review this patch series.
>
> Best Regards,
> William
Hi Thierry Reding,
Could you please help me review this patch series to see if there is
anything that needs to be modified?
Thanks for taking time to review this patch series.
Best Regards,
William
^ permalink raw reply [flat|nested] 7+ messages in thread