linux-remoteproc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnaud Pouliquen <arnaud.pouliquen@st.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<arnaud.pouliquen@st.com>
Subject: [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement
Date: Fri, 31 Jul 2020 13:47:28 +0200	[thread overview]
Message-ID: <20200731114732.12815-6-arnaud.pouliquen@st.com> (raw)
In-Reply-To: <20200731114732.12815-1-arnaud.pouliquen@st.com>

The name service announcement should not be linked to the RPMsg virtio bus
but to the RPMsg protocol itself.

This patch proposes to break the dependency with the RPmsg virtio bus by
the introduction of the reserved RPMsg name service driver which will be in
charge of managing the RPMsg name service announcement.

This first patch only implements the probe and the RPMsg endpoint to
manage create and release channels remote requests.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
 drivers/rpmsg/Kconfig          |   8 ++
 drivers/rpmsg/Makefile         |   1 +
 drivers/rpmsg/rpmsg_internal.h |  17 +++++
 drivers/rpmsg/rpmsg_ns.c       | 135 +++++++++++++++++++++++++++++++++
 4 files changed, 161 insertions(+)
 create mode 100644 drivers/rpmsg/rpmsg_ns.c

diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index f96716893c2a..140faa975ea1 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -15,6 +15,14 @@ config RPMSG_CHAR
 	  in /dev. They make it possible for user-space programs to send and
 	  receive rpmsg packets.
 
+config RPMSG_NS
+	tristate "RPMSG name service announcement"
+	depends on RPMSG
+	help
+	  Say Y here to enable the support of the name service announcement
+	  channel that probes the associate RPMsg device on remote endpoint
+	  service announcement.
+
 config RPMSG_MTK_SCP
 	tristate "MediaTek SCP"
 	depends on MTK_SCP
diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
index ffe932ef6050..8d452656f0ee 100644
--- a/drivers/rpmsg/Makefile
+++ b/drivers/rpmsg/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_RPMSG)		+= rpmsg_core.o
 obj-$(CONFIG_RPMSG_CHAR)	+= rpmsg_char.o
+obj-$(CONFIG_RPMSG_NS)		+= rpmsg_ns.o
 obj-$(CONFIG_RPMSG_MTK_SCP)	+= mtk_rpmsg.o
 qcom_glink-objs			:= qcom_glink_native.o qcom_glink_ssr.o
 obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index d5ab286d0e5e..641b48f6bf2a 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -102,4 +102,21 @@ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
 	return rpmsg_register_device(rpdev);
 }
 
+/**
+ * rpmsg_ns_register_device() - register name service device based on rpdev
+ * @rpdev: prepared rpdev to be used for creating endpoints
+ *
+ * This function wraps rpmsg_register_device() preparing the rpdev for use as
+ * basis for the rpmsg name service device.
+ */
+static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
+{
+	strcpy(rpdev->id.name, "rpmsg_ns");
+	rpdev->driver_override = "rpmsg_ns";
+	rpdev->src = RPMSG_NS_ADDR;
+	rpdev->dst = RPMSG_NS_ADDR;
+
+	return rpmsg_register_device(rpdev);
+}
+
 #endif
diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
new file mode 100644
index 000000000000..fe7713e737c2
--- /dev/null
+++ b/drivers/rpmsg/rpmsg_ns.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "rpmsg_internal.h"
+
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ */
+enum rpmsg_ns_flags {
+	RPMSG_NS_CREATE		= 0,
+	RPMSG_NS_DESTROY	= 1,
+};
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+struct rpmsg_ns_msg {
+	char name[RPMSG_NAME_SIZE];
+	u32 addr;
+	u32 flags;
+} __packed;
+
+/* invoked when a name service announcement arrives */
+static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
+		       void *priv, u32 src)
+{
+	struct rpmsg_ns_msg *msg = data;
+	struct rpmsg_device *newch;
+	struct rpmsg_channel_info chinfo;
+	struct device *dev = &rpdev->dev;
+	int ret;
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+	dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
+			 data, len, true);
+#endif
+
+	if (len != sizeof(*msg)) {
+		dev_err(dev, "malformed ns msg (%d)\n", len);
+		return -EINVAL;
+	}
+
+	/* don't trust the remote processor for null terminating the name */
+	msg->name[RPMSG_NAME_SIZE - 1] = '\0';
+
+	strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
+	chinfo.src = RPMSG_ADDR_ANY;
+	chinfo.dst = msg->addr;
+
+	dev_info(dev, "%sing channel %s addr 0x%x\n",
+		 msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
+		 msg->name, msg->addr);
+
+	if (msg->flags & RPMSG_NS_DESTROY) {
+		ret = rpmsg_release_channel(rpdev, &chinfo);
+		if (ret)
+			dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
+	} else {
+		newch = rpmsg_create_channel(rpdev, &chinfo);
+		if (!newch)
+			dev_err(dev, "rpmsg_create_channel failed\n");
+	}
+
+	return 0;
+}
+
+static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
+{
+	struct rpmsg_channel_info ns_chinfo;
+	struct rpmsg_endpoint *ns_ept;
+
+	ns_chinfo.src = RPMSG_NS_ADDR;
+	ns_chinfo.dst = RPMSG_NS_ADDR;
+	strcpy(ns_chinfo.name, "name_service");
+
+	/*
+	 * create and attach the endpoint to the rpmsg device that it would be
+	 * destroy when the rpmsg device will be deleted
+	 */
+	ns_ept = rpmsg_create_ept(rpdev, rpmsg_ns_cb, NULL, ns_chinfo);
+	if (!ns_ept) {
+		dev_err(&rpdev->dev, "failed to create the ns ept\n");
+		return -ENOMEM;
+	}
+	rpdev->ept = ns_ept;
+
+	rpdev->src = RPMSG_NS_ADDR;
+
+	return 0;
+}
+
+static struct rpmsg_driver rpmsg_ns_driver = {
+	.drv.name = "rpmsg_ns",
+	.probe = rpmsg_ns_probe,
+};
+
+static int rpmsg_ns_init(void)
+{
+	int ret;
+
+	ret = register_rpmsg_driver(&rpmsg_ns_driver);
+	if (ret < 0)
+		pr_err("%s: Failed to register rpmsg driver\n", __func__);
+
+	return ret;
+}
+postcore_initcall(rpmsg_ns_init);
+
+static void rpmsg_ns_exit(void)
+{
+	unregister_rpmsg_driver(&rpmsg_ns_driver);
+}
+module_exit(rpmsg_ns_exit);
+
+MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_ALIAS("rpmsg_ns");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


  parent reply	other threads:[~2020-07-31 11:48 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31 11:47 [PATCH 0/9] introduce name service announcement rpmsg driver Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 1/9] rpmsg: virtio: rename rpmsg_create_channel Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 2/9] rpmsg: core: add channel creation internal API Arnaud Pouliquen
2020-08-24 22:44   ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 3/9] rpmsg: virtio: add rpmsg channel device ops Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 4/9] rpmsg: define the name service announcement as reserved address Arnaud Pouliquen
2020-07-31 11:47 ` Arnaud Pouliquen [this message]
2020-08-05  9:05   ` [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement kernel test robot
2020-08-24 22:47   ` Mathieu Poirier
2020-08-25 11:57     ` Arnaud POULIQUEN
2020-08-25 14:36       ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 6/9] rpmsg: virtio: use rpmsg ns device for the " Arnaud Pouliquen
2020-08-24 22:48   ` Mathieu Poirier
2020-08-25 12:02     ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 7/9] rpmsg: ns: add name service announcement service Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 8/9] rpmsg: virtio: use rpmsg_ns driver to manage ns announcement Arnaud Pouliquen
2020-08-25 16:54   ` Mathieu Poirier
2020-08-26  7:42     ` Arnaud POULIQUEN
2020-08-26 22:10       ` Mathieu Poirier
2020-08-27  7:03         ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 9/9] rpmsg: ns: name service announcement endianness Arnaud Pouliquen
2020-08-24 23:04   ` Mathieu Poirier
2020-08-20 22:32 ` [PATCH 0/9] introduce name service announcement rpmsg driver Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200731114732.12815-6-arnaud.pouliquen@st.com \
    --to=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mathieu.poirier@linaro.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).