Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	"linux-remoteproc@vger.kernel.org"
	<linux-remoteproc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-stm32@st-md-mailman.stormreply.com" 
	<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement
Date: Tue, 25 Aug 2020 13:57:20 +0200
Message-ID: <cbb145da-95ea-9f10-98e5-2618294996d6@st.com> (raw)
In-Reply-To: <20200824224736.GD3938186@xps15>

Hi Mathieu

Thanks for the review! please find few comments below.

On 8/25/20 12:47 AM, Mathieu Poirier wrote:
> On Fri, Jul 31, 2020 at 01:47:28PM +0200, Arnaud Pouliquen wrote:
>> The name service announcement should not be linked to the RPMsg virtio bus
>> but to the RPMsg protocol itself.
>>
>> This patch proposes to break the dependency with the RPmsg virtio bus by
>> the introduction of the reserved RPMsg name service driver which will be in
>> charge of managing the RPMsg name service announcement.
>>
>> This first patch only implements the probe and the RPMsg endpoint to
>> manage create and release channels remote requests.
>>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
>> ---
>>  drivers/rpmsg/Kconfig          |   8 ++
>>  drivers/rpmsg/Makefile         |   1 +
>>  drivers/rpmsg/rpmsg_internal.h |  17 +++++
>>  drivers/rpmsg/rpmsg_ns.c       | 135 +++++++++++++++++++++++++++++++++
>>  4 files changed, 161 insertions(+)
>>  create mode 100644 drivers/rpmsg/rpmsg_ns.c
>>
>> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
>> index f96716893c2a..140faa975ea1 100644
>> --- a/drivers/rpmsg/Kconfig
>> +++ b/drivers/rpmsg/Kconfig
>> @@ -15,6 +15,14 @@ config RPMSG_CHAR
>>  	  in /dev. They make it possible for user-space programs to send and
>>  	  receive rpmsg packets.
>>  
>> +config RPMSG_NS
>> +	tristate "RPMSG name service announcement"
>> +	depends on RPMSG
>> +	help
>> +	  Say Y here to enable the support of the name service announcement
>> +	  channel that probes the associate RPMsg device on remote endpoint
> 
> s/associate/associated
> 
>> +	  service announcement.
>> +
>>  config RPMSG_MTK_SCP
>>  	tristate "MediaTek SCP"
>>  	depends on MTK_SCP
>> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
>> index ffe932ef6050..8d452656f0ee 100644
>> --- a/drivers/rpmsg/Makefile
>> +++ b/drivers/rpmsg/Makefile
>> @@ -1,6 +1,7 @@
>>  # SPDX-License-Identifier: GPL-2.0
>>  obj-$(CONFIG_RPMSG)		+= rpmsg_core.o
>>  obj-$(CONFIG_RPMSG_CHAR)	+= rpmsg_char.o
>> +obj-$(CONFIG_RPMSG_NS)		+= rpmsg_ns.o
>>  obj-$(CONFIG_RPMSG_MTK_SCP)	+= mtk_rpmsg.o
>>  qcom_glink-objs			:= qcom_glink_native.o qcom_glink_ssr.o
>>  obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
>> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
>> index d5ab286d0e5e..641b48f6bf2a 100644
>> --- a/drivers/rpmsg/rpmsg_internal.h
>> +++ b/drivers/rpmsg/rpmsg_internal.h
>> @@ -102,4 +102,21 @@ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
>>  	return rpmsg_register_device(rpdev);
>>  }
>>  
>> +/**
>> + * rpmsg_ns_register_device() - register name service device based on rpdev
>> + * @rpdev: prepared rpdev to be used for creating endpoints
>> + *
>> + * This function wraps rpmsg_register_device() preparing the rpdev for use as
>> + * basis for the rpmsg name service device.
>> + */
>> +static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
>> +{
>> +	strcpy(rpdev->id.name, "rpmsg_ns");
>> +	rpdev->driver_override = "rpmsg_ns";
>> +	rpdev->src = RPMSG_NS_ADDR;
>> +	rpdev->dst = RPMSG_NS_ADDR;
>> +
>> +	return rpmsg_register_device(rpdev);
>> +}
>> +
>>  #endif
>> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
>> new file mode 100644
>> index 000000000000..fe7713e737c2
>> --- /dev/null
>> +++ b/drivers/rpmsg/rpmsg_ns.c
>> @@ -0,0 +1,135 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
>> + */
>> +#include <linux/device.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include "rpmsg_internal.h"
>> +
>> +/**
>> + * enum rpmsg_ns_flags - dynamic name service announcement flags
>> + *
>> + * @RPMSG_NS_CREATE: a new remote service was just created
>> + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
>> + */
>> +enum rpmsg_ns_flags {
>> +	RPMSG_NS_CREATE		= 0,
>> +	RPMSG_NS_DESTROY	= 1,
>> +};
>> +
>> +/**
>> + * struct rpmsg_ns_msg - dynamic name service announcement message
>> + * @name: name of remote service that is published
>> + * @addr: address of remote service that is published
>> + * @flags: indicates whether service is created or destroyed
>> + *
>> + * This message is sent across to publish a new service, or announce
>> + * about its removal. When we receive these messages, an appropriate
>> + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
>> + * or ->remove() handler of the appropriate rpmsg driver will be invoked
>> + * (if/as-soon-as one is registered).
>> + */
>> +struct rpmsg_ns_msg {
>> +	char name[RPMSG_NAME_SIZE];
>> +	u32 addr;
>> +	u32 flags;
>> +} __packed;
>> +
>> +/* invoked when a name service announcement arrives */
>> +static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
>> +		       void *priv, u32 src)
>> +{
>> +	struct rpmsg_ns_msg *msg = data;
>> +	struct rpmsg_device *newch;
>> +	struct rpmsg_channel_info chinfo;
>> +	struct device *dev = &rpdev->dev;
>> +	int ret;
>> +
>> +#if defined(CONFIG_DYNAMIC_DEBUG)
>> +	dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
>> +			 data, len, true);
>> +#endif
>> +
>> +	if (len != sizeof(*msg)) {
>> +		dev_err(dev, "malformed ns msg (%d)\n", len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* don't trust the remote processor for null terminating the name */
>> +	msg->name[RPMSG_NAME_SIZE - 1] = '\0';
>> +
>> +	strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
>> +	chinfo.src = RPMSG_ADDR_ANY;
>> +	chinfo.dst = msg->addr;
>> +
>> +	dev_info(dev, "%sing channel %s addr 0x%x\n",
>> +		 msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
>> +		 msg->name, msg->addr);
>> +
>> +	if (msg->flags & RPMSG_NS_DESTROY) {
>> +		ret = rpmsg_release_channel(rpdev, &chinfo);
>> +		if (ret)
>> +			dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
>> +	} else {
>> +		newch = rpmsg_create_channel(rpdev, &chinfo);
>> +		if (!newch)
>> +			dev_err(dev, "rpmsg_create_channel failed\n");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
>> +{
>> +	struct rpmsg_channel_info ns_chinfo;
>> +	struct rpmsg_endpoint *ns_ept;
>> +
>> +	ns_chinfo.src = RPMSG_NS_ADDR;
>> +	ns_chinfo.dst = RPMSG_NS_ADDR;
>> +	strcpy(ns_chinfo.name, "name_service");
>> +
>> +	/*
>> +	 * create and attach the endpoint to the rpmsg device that it would be
>> +	 * destroy when the rpmsg device will be deleted
>> +	 */
> 
> This comment doesn't work, please revise.

Could you clarify what does not work, from your POV?
in view of your comment, it seems I should at least rephrase it... 
proposal:
	/*
 	 * Create the NS service endpoint associated to the rpmsg device.
         * The endpoint will be automatically destroyed when the rpmsg device
         * will be deleted.
	 */

> 
>> +	ns_ept = rpmsg_create_ept(rpdev, rpmsg_ns_cb, NULL, ns_chinfo);
>> +	if (!ns_ept) {
>> +		dev_err(&rpdev->dev, "failed to create the ns ept\n");
>> +		return -ENOMEM;
>> +	}
>> +	rpdev->ept = ns_ept;
>> +
>> +	rpdev->src = RPMSG_NS_ADDR;
> 
> I think this is already done in rpmsg_ns_register_device().

You are right!

thanks,
Arnaud
> 
>> +
>> +	return 0;
>> +}
>> +
>> +static struct rpmsg_driver rpmsg_ns_driver = {
>> +	.drv.name = "rpmsg_ns",
>> +	.probe = rpmsg_ns_probe,
>> +};
>> +
>> +static int rpmsg_ns_init(void)
>> +{
>> +	int ret;
>> +
>> +	ret = register_rpmsg_driver(&rpmsg_ns_driver);
>> +	if (ret < 0)
>> +		pr_err("%s: Failed to register rpmsg driver\n", __func__);
>> +
>> +	return ret;
>> +}
>> +postcore_initcall(rpmsg_ns_init);
>> +
>> +static void rpmsg_ns_exit(void)
>> +{
>> +	unregister_rpmsg_driver(&rpmsg_ns_driver);
>> +}
>> +module_exit(rpmsg_ns_exit);
>> +
>> +MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
>> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
>> +MODULE_ALIAS("rpmsg_ns");
>> +MODULE_LICENSE("GPL v2");
>> -- 
>> 2.17.1
>>

  reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31 11:47 [PATCH 0/9] introduce name service announcement rpmsg driver Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 1/9] rpmsg: virtio: rename rpmsg_create_channel Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 2/9] rpmsg: core: add channel creation internal API Arnaud Pouliquen
2020-08-24 22:44   ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 3/9] rpmsg: virtio: add rpmsg channel device ops Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 4/9] rpmsg: define the name service announcement as reserved address Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement Arnaud Pouliquen
2020-08-05  9:05   ` kernel test robot
2020-08-24 22:47   ` Mathieu Poirier
2020-08-25 11:57     ` Arnaud POULIQUEN [this message]
2020-08-25 14:36       ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 6/9] rpmsg: virtio: use rpmsg ns device for the " Arnaud Pouliquen
2020-08-24 22:48   ` Mathieu Poirier
2020-08-25 12:02     ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 7/9] rpmsg: ns: add name service announcement service Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 8/9] rpmsg: virtio: use rpmsg_ns driver to manage ns announcement Arnaud Pouliquen
2020-08-25 16:54   ` Mathieu Poirier
2020-08-26  7:42     ` Arnaud POULIQUEN
2020-08-26 22:10       ` Mathieu Poirier
2020-08-27  7:03         ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 9/9] rpmsg: ns: name service announcement endianness Arnaud Pouliquen
2020-08-24 23:04   ` Mathieu Poirier
2020-08-20 22:32 ` [PATCH 0/9] introduce name service announcement rpmsg driver Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cbb145da-95ea-9f10-98e5-2618294996d6@st.com \
    --to=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mathieu.poirier@linaro.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git