[PATCH v4 0/4] dt-bindings: phy: add r8a77961 support

[PATCH v4 0/4] dt-bindings: phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds USBPHY 2.0/3.0 devices support for r8a77961
(R-Car M3-W+).

Changes from v3:
 - Retain a description of #phy-cell in patch 1/4.
 - Add Reviewed-by in patch 1/4 and 3/4.
 https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507

Changes from v2:
 - Modify json-schema files which Geert-san was pointed out.
 https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847

Changes from v1:
 - Rebase these patches on top of my patches of convert bindings to
   json-schema.
 - Add Reviewed-by.
 https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195

Yoshihiro Shimoda (4):
  dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb3-phy: add r8a77961 support

 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 ------------
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt |  52 ---------
 .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 117 +++++++++++++++++++++
 .../devicetree/bindings/phy/renesas,usb3-phy.yaml  |  79 ++++++++++++++
 4 files changed, 196 insertions(+), 122 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

-- 
2.7.4

[PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 -------------
 .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 116 +++++++++++++++++++++
 2 files changed, 116 insertions(+), 70 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b21..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
-	      SoC.
-	      "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
-	      SoC.
-	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
-	      SoC.
-	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,usb2-phy-r8a77965" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,usb2-phy-r8a77990" if the device is a part of an
-	      R8A77990 SoC.
-	      "renesas,usb2-phy-r8a77995" if the device is a part of an
-	      R8A77995 SoC.
-	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
-	      RZ/A2 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
-	      using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
-	       regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
-		       otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
-           "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
-	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee080200 0 0x700>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 703>;
-	};
-
-	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&cpg CPG_MOD 702>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 00000000..7681e47
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r7s9210  # RZ/A2
+              - renesas,usb2-phy-r8a774a1 # RZ/G2M
+              - renesas,usb2-phy-r8a774b1 # RZ/G2N
+              - renesas,usb2-phy-r8a774c0 # RZ/G2E
+              - renesas,usb2-phy-r8a7795  # R-Car H3
+              - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77965 # R-Car M3-N
+              - renesas,usb2-phy-r8a77990 # R-Car E3
+              - renesas,usb2-phy-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: fck
+      - const: usb_x1
+
+  '#phy-cells':
+    enum: [0, 1]  # and 0 is deprecated.
+    description: |
+      The phandle's argument in the PHY specifier is the INT_STATUS bit of
+      controller.
+      - 1 = USBH_INTA (OHCI)
+      - 2 = USBH_INTB (EHCI)
+      - 3 = UCOM_INT (OTG and BC)
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: reset of USB 2.0 host side
+      - description: reset of USB 2.0 peripheral side
+
+  vbus-supply:
+    description: |
+      Phandle to a regulator that provides power to the VBUS. This regulator
+      will be managed during the PHY power on/off sequence.
+
+  renesas,no-otg-pins:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      specify when a board does not provide proper otg pins.
+
+  dr_mode: true
+
+if:
+  properties:
+    compatible:
+      items:
+        enum:
+          - renesas,usb2-phy-r7s9210
+then:
+  required:
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@ee080200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee080200 0x700>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 703>;
+        #phy-cells = <1>;
+    };
+
+    usb-phy@ee0a0200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee0a0200 0x700>;
+        clocks = <&cpg CPG_MOD 702>;
+        #phy-cells = <1>;
+    };
-- 
2.7.4

[PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds support for r8a77961 (R-Car M3-W+).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index 7681e47..440f09f 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -23,6 +23,7 @@ properties:
               - renesas,usb2-phy-r8a774c0 # RZ/G2E
               - renesas,usb2-phy-r8a7795  # R-Car H3
               - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
               - renesas,usb2-phy-r8a77965 # R-Car M3-N
               - renesas,usb2-phy-r8a77990 # R-Car E3
               - renesas,usb2-phy-r8a77995 # R-Car D3
-- 
2.7.4

Re: [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support

[Rob Herring]

On Fri, 27 Mar 2020 18:33:54 +0900, Yoshihiro Shimoda wrote:
> This patch adds support for r8a77961 (R-Car M3-W+).
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema

[Yoshihiro Shimoda]

Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
to json-schema.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------------
 .../devicetree/bindings/phy/renesas,usb3-phy.yaml  | 78 ++++++++++++++++++++++
 2 files changed, 78 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 00000000..edd5417
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-usb3-phy # RZ/G2M
+          - renesas,r8a774b1-usb3-phy # RZ/G2N
+          - renesas,r8a7795-usb3-phy  # R-Car H3
+          - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77965-usb3-phy # R-Car M3-N
+      - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: usb3-if # The funcional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    description: |
+      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+      exist means disabling the ssc. The actual value will be -<value> ppm.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0xe65ee000 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };
-- 
2.7.4

[PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support

[Yoshihiro Shimoda]

This patch adds support for r8a77961 (R-Car M3-W+).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
index edd5417..f459eaf 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -17,6 +17,7 @@ properties:
           - renesas,r8a774b1-usb3-phy # RZ/G2N
           - renesas,r8a7795-usb3-phy  # R-Car H3
           - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77961-usb3-phy # R-Car M3-W+
           - renesas,r8a77965-usb3-phy # R-Car M3-N
       - const: renesas,rcar-gen3-usb3-phy
 
-- 
2.7.4

Re: [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support

[Rob Herring]

On Fri, 27 Mar 2020 18:33:56 +0900, Yoshihiro Shimoda wrote:
> This patch adds support for r8a77961 (R-Car M3-W+).
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

RE: [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support

[Yoshihiro Shimoda]

Hi Kishon,

> From: Yoshihiro Shimoda, Sent: Friday, March 27, 2020 6:34 PM
> 
> This patch adds USBPHY 2.0/3.0 devices support for r8a77961
> (R-Car M3-W+).

Would you apply this patch series to your repository?
Or, should I resend?

JFYI:
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262633

Best regards,
Yoshihiro Shimoda

> Changes from v3:
>  - Retain a description of #phy-cell in patch 1/4.
>  - Add Reviewed-by in patch 1/4 and 3/4.
>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507
> 
> Changes from v2:
>  - Modify json-schema files which Geert-san was pointed out.
>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847
> 
> Changes from v1:
>  - Rebase these patches on top of my patches of convert bindings to
>    json-schema.
>  - Add Reviewed-by.
>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195
> 
> Yoshihiro Shimoda (4):
>   dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
>   dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
>   dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
>   dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
> 
>  .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 ------------
>  .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt |  52 ---------
>  .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 117 +++++++++++++++++++++
>  .../devicetree/bindings/phy/renesas,usb3-phy.yaml  |  79 ++++++++++++++
>  4 files changed, 196 insertions(+), 122 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
>  delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
>  create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> 
> --
> 2.7.4

Re: [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support

[Kishon Vijay Abraham I]

On 5/14/2020 2:56 PM, Yoshihiro Shimoda wrote:
> Hi Kishon,
> 
>> From: Yoshihiro Shimoda, Sent: Friday, March 27, 2020 6:34 PM
>>
>> This patch adds USBPHY 2.0/3.0 devices support for r8a77961
>> (R-Car M3-W+).
> 
> Would you apply this patch series to your repository?
> Or, should I resend?
> 
> JFYI:
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262633

merged them now, thanks!

-Kishon
> 
> Best regards,
> Yoshihiro Shimoda
> 
>> Changes from v3:
>>  - Retain a description of #phy-cell in patch 1/4.
>>  - Add Reviewed-by in patch 1/4 and 3/4.
>>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507
>>
>> Changes from v2:
>>  - Modify json-schema files which Geert-san was pointed out.
>>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847
>>
>> Changes from v1:
>>  - Rebase these patches on top of my patches of convert bindings to
>>    json-schema.
>>  - Add Reviewed-by.
>>  https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195
>>
>> Yoshihiro Shimoda (4):
>>   dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
>>   dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
>>   dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
>>   dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
>>
>>  .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  70 ------------
>>  .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt |  52 ---------
>>  .../devicetree/bindings/phy/renesas,usb2-phy.yaml  | 117 +++++++++++++++++++++
>>  .../devicetree/bindings/phy/renesas,usb3-phy.yaml  |  79 ++++++++++++++
>>  4 files changed, 196 insertions(+), 122 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
>>  delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
>>  create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
>>  create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
>>
>> --
>> 2.7.4
>