From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se,
kieran.bingham@ideasonboard.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 3/6] media: adv748x: csi2: Link AFE with TXA and TXB
Date: Sun, 6 Jan 2019 16:54:10 +0100 [thread overview]
Message-ID: <20190106155413.30666-4-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190106155413.30666-1-jacopo+renesas@jmondi.org>
The ADV748x chip supports routing AFE output to either TXA or TXB.
In order to support run-time configuration of video stream path, create an
additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
from existing ones.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 44 +++++++++++++-----------
1 file changed, 23 insertions(+), 21 deletions(-)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index b6b5d8c7ea7c..9d391d6f752e 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -27,6 +27,7 @@ static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
* @v4l2_dev: Video registration device
* @src: Source subdevice to establish link
* @src_pad: Pad number of source to link to this @tx
+ * @enable: Link enabled flag
*
* Ensure that the subdevice is registered against the v4l2_device, and link the
* source pad to the sink pad of the CSI2 bus entity.
@@ -34,17 +35,11 @@ static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
struct v4l2_device *v4l2_dev,
struct v4l2_subdev *src,
- unsigned int src_pad)
+ unsigned int src_pad,
+ bool enable)
{
- int enabled = MEDIA_LNK_FL_ENABLED;
int ret;
- /*
- * Dynamic linking of the AFE is not supported.
- * Register the links as immutable.
- */
- enabled |= MEDIA_LNK_FL_IMMUTABLE;
-
if (!src->v4l2_dev) {
ret = v4l2_device_register_subdev(v4l2_dev, src);
if (ret)
@@ -53,7 +48,7 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
return media_create_pad_link(&src->entity, src_pad,
&tx->sd.entity, ADV748X_CSI2_SINK,
- enabled);
+ enable ? MEDIA_LNK_FL_ENABLED : 0);
}
/* -----------------------------------------------------------------------------
@@ -68,25 +63,32 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
{
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
struct adv748x_state *state = tx->state;
+ int ret;
adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
sd->name);
/*
- * The adv748x hardware allows the AFE to route through the TXA, however
- * this is not currently supported in this driver.
+ * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
+ * HDMI.
*
- * Link HDMI->TXA, and AFE->TXB directly.
+ * The HDMI->TXA link is enabled by default, as the AFE->TXB is.
*/
- if (is_txa(tx) && is_hdmi_enabled(state))
- return adv748x_csi2_register_link(tx, sd->v4l2_dev,
- &state->hdmi.sd,
- ADV748X_HDMI_SOURCE);
- if (is_txb(tx) && is_afe_enabled(state))
- return adv748x_csi2_register_link(tx, sd->v4l2_dev,
- &state->afe.sd,
- ADV748X_AFE_SOURCE);
- return 0;
+ if (is_afe_enabled(state)) {
+ ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
+ &state->afe.sd,
+ ADV748X_AFE_SOURCE,
+ is_txb(tx));
+ if (ret)
+ return ret;
+ }
+
+ /* Register link to HDMI for TXA only. */
+ if (is_txb(tx) || !is_hdmi_enabled(state))
+ return 0;
+
+ return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
+ ADV748X_HDMI_SOURCE, true);
}
static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
--
2.20.1
next prev parent reply other threads:[~2019-01-06 15:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-06 15:54 [PATCH v2 0/6] media: adv748x: Implement dynamic routing support Jacopo Mondi
2019-01-06 15:54 ` [PATCH v2 1/6] media: adv748x: Add is_txb() Jacopo Mondi
2019-01-07 9:49 ` Kieran Bingham
2019-01-07 10:05 ` Jacopo Mondi
2019-01-07 10:38 ` Kieran Bingham
2019-01-09 0:04 ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 2/6] media: adv748x: Rename reset procedures Jacopo Mondi
2019-01-07 9:59 ` Kieran Bingham
2019-01-06 15:54 ` Jacopo Mondi [this message]
2019-01-07 10:35 ` [PATCH v2 3/6] media: adv748x: csi2: Link AFE with TXA and TXB Kieran Bingham
2019-01-09 0:11 ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 4/6] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2019-01-07 10:41 ` Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 5/6] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2019-01-07 10:45 ` Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 6/6] media: adv748x: Implement TX link_setup callback Jacopo Mondi
2019-01-07 12:36 ` Kieran Bingham
2019-01-09 0:15 ` Laurent Pinchart
2019-01-09 14:15 ` Kieran Bingham
2019-01-10 8:58 ` Jacopo Mondi
2019-01-10 10:05 ` Kieran Bingham
2019-01-10 8:51 ` Jacopo Mondi
2019-01-10 9:27 ` Laurent Pinchart
2019-01-09 14:17 ` Kieran Bingham
2019-01-10 10:01 ` Jacopo Mondi
2019-01-10 13:40 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190106155413.30666-4-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).