Linux-RISC-V Archive on lore.kernel.org
 help / Atom feed
* [PATCH v3 0/2] L2 cache controller support for SiFive FU540
@ 2019-05-06 10:48 Yash Shah
  2019-05-06 10:48 ` [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller Yash Shah
  2019-05-06 10:48 ` [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs Yash Shah
  0 siblings, 2 replies; 8+ messages in thread
From: Yash Shah @ 2019-05-06 10:48 UTC (permalink / raw)
  To: linux-riscv, devicetree, palmer
  Cc: mark.rutland, aou, linux-kernel, afd, sachin.ghadi, Yash Shah,
	robh+dt, paul.walmsley

This patch series adds an L2 cache controller driver with DT documentation
for SiFive FU540-C000.

These two patches were initially part of the patch series:
'L2 cache controller and EDAC support for SiFive SoCs'
https://lkml.org/lkml/2019/4/15/320
In order to merge L2 cache controller driver without any dependency on EDAC,
the L2 cache controller patches are re-posted separately in this series.

The patchset is based on Linux 5.1-rc2 and tested on HiFive Unleashed
board with additional board related patches needed for testing can be
found at dev/yashs/L2_cache_controller branch of:
https://github.com/yashshah7/riscv-linux.git

Changes since v2
- Add a header file to expose Macros and extern functions
- Remove all single line functions

Changes since v1
- Mention the valid values for cache properties in DT documentation
- Remove the unnecessary property 'reg-names'
- Add "cache" to supported compatible string property
- Remove conditional checks from debugfs functions in sifive_l2_cache.c

Yash Shah (2):
  RISC-V: Add DT documentation for SiFive L2 Cache Controller
  RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive
    SoCs

 .../devicetree/bindings/riscv/sifive-l2-cache.txt  |  51 ++++++
 arch/riscv/include/asm/sifive_l2_cache.h           |  16 ++
 arch/riscv/mm/Makefile                             |   1 +
 arch/riscv/mm/sifive_l2_cache.c                    | 175 +++++++++++++++++++++
 4 files changed, 243 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
 create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
 create mode 100644 arch/riscv/mm/sifive_l2_cache.c

-- 
1.9.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller
  2019-05-06 10:48 [PATCH v3 0/2] L2 cache controller support for SiFive FU540 Yash Shah
@ 2019-05-06 10:48 ` Yash Shah
  2019-05-13 17:25   ` Rob Herring
  2019-05-06 10:48 ` [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs Yash Shah
  1 sibling, 1 reply; 8+ messages in thread
From: Yash Shah @ 2019-05-06 10:48 UTC (permalink / raw)
  To: linux-riscv, devicetree, palmer
  Cc: mark.rutland, aou, linux-kernel, afd, sachin.ghadi, Yash Shah,
	robh+dt, paul.walmsley

Add device tree bindings for SiFive FU540 L2 cache controller driver

Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
 .../devicetree/bindings/riscv/sifive-l2-cache.txt  | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt

diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
new file mode 100644
index 0000000..73d8f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
@@ -0,0 +1,51 @@
+SiFive L2 Cache Controller
+--------------------------
+The SiFive Level 2 Cache Controller is used to provide access to fast copies
+of memory for masters in a Core Complex. The Level 2 Cache Controller also
+acts as directory-based coherency manager.
+All the properties in ePAPR/DeviceTree specification applies for this platform
+
+Required Properties:
+--------------------
+- compatible: Should be "sifive,fu540-c000-ccache" and "cache"
+
+- cache-block-size: Specifies the block size in bytes of the cache.
+  Should be 64
+
+- cache-level: Should be set to 2 for a level 2 cache
+
+- cache-sets: Specifies the number of associativity sets of the cache.
+  Should be 1024
+
+- cache-size: Specifies the size in bytes of the cache. Should be 2097152
+
+- cache-unified: Specifies the cache is a unified cache
+
+- interrupts: Must contain 3 entries (DirError, DataError and DataFail signals)
+
+- reg: Physical base address and size of L2 cache controller registers map
+
+Optional Properties:
+--------------------
+- next-level-cache: phandle to the next level cache if present.
+
+- memory-region: reference to the reserved-memory for the L2 Loosely Integrated
+  Memory region. The reserved memory node should be defined as per the bindings
+  in reserved-memory.txt
+
+
+Example:
+
+	cache-controller@2010000 {
+		compatible = "sifive,fu540-c000-ccache", "cache";
+		cache-block-size = <64>;
+		cache-level = <2>;
+		cache-sets = <1024>;
+		cache-size = <2097152>;
+		cache-unified;
+		interrupt-parent = <&plic0>;
+		interrupts = <1 2 3>;
+		reg = <0x0 0x2010000 0x0 0x1000>;
+		next-level-cache = <&L25 &L40 &L36>;
+		memory-region = <&l2_lim>;
+	};
-- 
1.9.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  2019-05-06 10:48 [PATCH v3 0/2] L2 cache controller support for SiFive FU540 Yash Shah
  2019-05-06 10:48 ` [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller Yash Shah
@ 2019-05-06 10:48 ` Yash Shah
  2019-05-06 12:18   ` Andrew F. Davis
  1 sibling, 1 reply; 8+ messages in thread
From: Yash Shah @ 2019-05-06 10:48 UTC (permalink / raw)
  To: linux-riscv, devicetree, palmer
  Cc: mark.rutland, aou, linux-kernel, afd, sachin.ghadi, Yash Shah,
	robh+dt, paul.walmsley

The driver currently supports only SiFive FU540-C000 platform.

The initial version of L2 cache controller driver includes:
- Initial configuration reporting at boot up.
- Support for ECC related functionality.

Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
 arch/riscv/include/asm/sifive_l2_cache.h |  16 +++
 arch/riscv/mm/Makefile                   |   1 +
 arch/riscv/mm/sifive_l2_cache.c          | 175 +++++++++++++++++++++++++++++++
 3 files changed, 192 insertions(+)
 create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
 create mode 100644 arch/riscv/mm/sifive_l2_cache.c

diff --git a/arch/riscv/include/asm/sifive_l2_cache.h b/arch/riscv/include/asm/sifive_l2_cache.h
new file mode 100644
index 0000000..04f6748
--- /dev/null
+++ b/arch/riscv/include/asm/sifive_l2_cache.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SiFive L2 Cache Controller header file
+ *
+ */
+
+#ifndef _ASM_RISCV_SIFIVE_L2_CACHE_H
+#define _ASM_RISCV_SIFIVE_L2_CACHE_H
+
+extern int register_sifive_l2_error_notifier(struct notifier_block *nb);
+extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb);
+
+#define SIFIVE_L2_ERR_TYPE_CE 0
+#define SIFIVE_L2_ERR_TYPE_UE 1
+
+#endif /* _ASM_RISCV_SIFIVE_L2_CACHE_H */
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index eb22ab4..1523ee5 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -3,3 +3,4 @@ obj-y += fault.o
 obj-y += extable.o
 obj-y += ioremap.o
 obj-y += cacheflush.o
+obj-y += sifive_l2_cache.o
diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
new file mode 100644
index 0000000..4eb6461
--- /dev/null
+++ b/arch/riscv/mm/sifive_l2_cache.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SiFive L2 cache controller Driver
+ *
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ *
+ */
+#include <linux/debugfs.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <asm/sifive_l2_cache.h>
+
+#define SIFIVE_L2_DIRECCFIX_LOW 0x100
+#define SIFIVE_L2_DIRECCFIX_HIGH 0x104
+#define SIFIVE_L2_DIRECCFIX_COUNT 0x108
+
+#define SIFIVE_L2_DATECCFIX_LOW 0x140
+#define SIFIVE_L2_DATECCFIX_HIGH 0x144
+#define SIFIVE_L2_DATECCFIX_COUNT 0x148
+
+#define SIFIVE_L2_DATECCFAIL_LOW 0x160
+#define SIFIVE_L2_DATECCFAIL_HIGH 0x164
+#define SIFIVE_L2_DATECCFAIL_COUNT 0x168
+
+#define SIFIVE_L2_CONFIG 0x00
+#define SIFIVE_L2_WAYENABLE 0x08
+#define SIFIVE_L2_ECCINJECTERR 0x40
+
+#define SIFIVE_L2_MAX_ECCINTR 3
+
+static void __iomem *l2_base;
+static int g_irq[SIFIVE_L2_MAX_ECCINTR];
+
+enum {
+	DIR_CORR = 0,
+	DATA_CORR,
+	DATA_UNCORR,
+};
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *sifive_test;
+
+static ssize_t l2_write(struct file *file, const char __user *data,
+			size_t count, loff_t *ppos)
+{
+	unsigned int val;
+
+	if (kstrtouint_from_user(data, count, 0, &val))
+		return -EINVAL;
+	if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
+		writel(val, l2_base + SIFIVE_L2_ECCINJECTERR);
+	else
+		return -EINVAL;
+	return count;
+}
+
+static const struct file_operations l2_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.write = l2_write
+};
+
+static void setup_sifive_debug(void)
+{
+	sifive_test = debugfs_create_dir("sifive_l2_cache", NULL);
+
+	debugfs_create_file("sifive_debug_inject_error", 0200,
+			    sifive_test, NULL, &l2_fops);
+}
+#endif
+
+static void l2_config_read(void)
+{
+	u32 regval, val;
+
+	regval = readl(l2_base + SIFIVE_L2_CONFIG);
+	val = regval & 0xFF;
+	pr_info("L2CACHE: No. of Banks in the cache: %d\n", val);
+	val = (regval & 0xFF00) >> 8;
+	pr_info("L2CACHE: No. of ways per bank: %d\n", val);
+	val = (regval & 0xFF0000) >> 16;
+	pr_info("L2CACHE: Sets per bank: %llu\n", (uint64_t)1 << val);
+	val = (regval & 0xFF000000) >> 24;
+	pr_info("L2CACHE: Bytes per cache block: %llu\n", (uint64_t)1 << val);
+
+	regval = readl(l2_base + SIFIVE_L2_WAYENABLE);
+	pr_info("L2CACHE: Index of the largest way enabled: %d\n", regval);
+}
+
+static const struct of_device_id sifive_l2_ids[] = {
+	{ .compatible = "sifive,fu540-c000-ccache" },
+	{ /* end of table */ },
+};
+
+static ATOMIC_NOTIFIER_HEAD(l2_err_chain);
+
+int register_sifive_l2_error_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&l2_err_chain, nb);
+}
+EXPORT_SYMBOL_GPL(register_sifive_l2_error_notifier);
+
+int unregister_sifive_l2_error_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&l2_err_chain, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_sifive_l2_error_notifier);
+
+static irqreturn_t l2_int_handler(int irq, void *device)
+{
+	unsigned int regval, add_h, add_l;
+
+	if (irq == g_irq[DIR_CORR]) {
+		add_h = readl(l2_base + SIFIVE_L2_DIRECCFIX_HIGH);
+		add_l = readl(l2_base + SIFIVE_L2_DIRECCFIX_LOW);
+		pr_err("L2CACHE: DirError @ 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(l2_base + SIFIVE_L2_DIRECCFIX_COUNT);
+		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
+					   "DirECCFix");
+	}
+	if (irq == g_irq[DATA_CORR]) {
+		add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH);
+		add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW);
+		pr_err("L2CACHE: DataError @ 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(l2_base + SIFIVE_L2_DATECCFIX_COUNT);
+		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
+					   "DatECCFix");
+	}
+	if (irq == g_irq[DATA_UNCORR]) {
+		add_h = readl(l2_base + SIFIVE_L2_DATECCFAIL_HIGH);
+		add_l = readl(l2_base + SIFIVE_L2_DATECCFAIL_LOW);
+		pr_err("L2CACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(l2_base + SIFIVE_L2_DATECCFAIL_COUNT);
+		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE,
+					   "DatECCFail");
+	}
+
+	return IRQ_HANDLED;
+}
+
+int __init sifive_l2_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int i, rc;
+
+	np = of_find_matching_node(NULL, sifive_l2_ids);
+	if (!np)
+		return -ENODEV;
+
+	if (of_address_to_resource(np, 0, &res))
+		return -ENODEV;
+
+	l2_base = ioremap(res.start, resource_size(&res));
+	if (!l2_base)
+		return -ENOMEM;
+
+	for (i = 0; i < SIFIVE_L2_MAX_ECCINTR; i++) {
+		g_irq[i] = irq_of_parse_and_map(np, i);
+		rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
+		if (rc) {
+			pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]);
+			return rc;
+		}
+	}
+
+	l2_config_read();
+
+#ifdef CONFIG_DEBUG_FS
+	setup_sifive_debug();
+#endif
+	return 0;
+}
+device_initcall(sifive_l2_init);
-- 
1.9.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  2019-05-06 10:48 ` [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs Yash Shah
@ 2019-05-06 12:18   ` Andrew F. Davis
  2019-05-07  6:48     ` Yash Shah
  0 siblings, 1 reply; 8+ messages in thread
From: Andrew F. Davis @ 2019-05-06 12:18 UTC (permalink / raw)
  To: Yash Shah, linux-riscv, devicetree, palmer
  Cc: mark.rutland, aou, linux-kernel, sachin.ghadi, robh+dt, paul.walmsley

On 5/6/19 6:48 AM, Yash Shah wrote:
> The driver currently supports only SiFive FU540-C000 platform.
> 
> The initial version of L2 cache controller driver includes:
> - Initial configuration reporting at boot up.
> - Support for ECC related functionality.
> 
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
>  arch/riscv/include/asm/sifive_l2_cache.h |  16 +++
>  arch/riscv/mm/Makefile                   |   1 +
>  arch/riscv/mm/sifive_l2_cache.c          | 175 +++++++++++++++++++++++++++++++
>  3 files changed, 192 insertions(+)
>  create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
>  create mode 100644 arch/riscv/mm/sifive_l2_cache.c
> 
> diff --git a/arch/riscv/include/asm/sifive_l2_cache.h b/arch/riscv/include/asm/sifive_l2_cache.h
> new file mode 100644
> index 0000000..04f6748
> --- /dev/null
> +++ b/arch/riscv/include/asm/sifive_l2_cache.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * SiFive L2 Cache Controller header file
> + *
> + */
> +
> +#ifndef _ASM_RISCV_SIFIVE_L2_CACHE_H
> +#define _ASM_RISCV_SIFIVE_L2_CACHE_H
> +
> +extern int register_sifive_l2_error_notifier(struct notifier_block *nb);
> +extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb);
> +
> +#define SIFIVE_L2_ERR_TYPE_CE 0
> +#define SIFIVE_L2_ERR_TYPE_UE 1
> +
> +#endif /* _ASM_RISCV_SIFIVE_L2_CACHE_H */
> diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
> index eb22ab4..1523ee5 100644
> --- a/arch/riscv/mm/Makefile
> +++ b/arch/riscv/mm/Makefile
> @@ -3,3 +3,4 @@ obj-y += fault.o
>  obj-y += extable.o
>  obj-y += ioremap.o
>  obj-y += cacheflush.o
> +obj-y += sifive_l2_cache.o
> diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
> new file mode 100644
> index 0000000..4eb6461
> --- /dev/null
> +++ b/arch/riscv/mm/sifive_l2_cache.c
> @@ -0,0 +1,175 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SiFive L2 cache controller Driver
> + *
> + * Copyright (C) 2018-2019 SiFive, Inc.
> + *
> + */
> +#include <linux/debugfs.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <asm/sifive_l2_cache.h>
> +
> +#define SIFIVE_L2_DIRECCFIX_LOW 0x100
> +#define SIFIVE_L2_DIRECCFIX_HIGH 0x104
> +#define SIFIVE_L2_DIRECCFIX_COUNT 0x108
> +
> +#define SIFIVE_L2_DATECCFIX_LOW 0x140
> +#define SIFIVE_L2_DATECCFIX_HIGH 0x144
> +#define SIFIVE_L2_DATECCFIX_COUNT 0x148
> +
> +#define SIFIVE_L2_DATECCFAIL_LOW 0x160
> +#define SIFIVE_L2_DATECCFAIL_HIGH 0x164
> +#define SIFIVE_L2_DATECCFAIL_COUNT 0x168
> +
> +#define SIFIVE_L2_CONFIG 0x00
> +#define SIFIVE_L2_WAYENABLE 0x08
> +#define SIFIVE_L2_ECCINJECTERR 0x40
> +
> +#define SIFIVE_L2_MAX_ECCINTR 3
> +
> +static void __iomem *l2_base;
> +static int g_irq[SIFIVE_L2_MAX_ECCINTR];
> +
> +enum {
> +	DIR_CORR = 0,
> +	DATA_CORR,
> +	DATA_UNCORR,
> +};
> +
> +#ifdef CONFIG_DEBUG_FS
> +static struct dentry *sifive_test;
> +
> +static ssize_t l2_write(struct file *file, const char __user *data,
> +			size_t count, loff_t *ppos)
> +{
> +	unsigned int val;
> +
> +	if (kstrtouint_from_user(data, count, 0, &val))
> +		return -EINVAL;
> +	if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))

I'm guessing bit 16 is the enable and the lower 8 are some kind of
region to enable the error? This is probably a bad interface, it looks
useful for testing but doesn't provide any debugging info useful for
running systems. Do you really want userspace to be able to do this?

Andrew

> +		writel(val, l2_base + SIFIVE_L2_ECCINJECTERR);
> +	else
> +		return -EINVAL;
> +	return count;
> +}
> +
> +static const struct file_operations l2_fops = {
> +	.owner = THIS_MODULE,
> +	.open = simple_open,
> +	.write = l2_write
> +};
> +
> +static void setup_sifive_debug(void)
> +{
> +	sifive_test = debugfs_create_dir("sifive_l2_cache", NULL);
> +
> +	debugfs_create_file("sifive_debug_inject_error", 0200,
> +			    sifive_test, NULL, &l2_fops);
> +}
> +#endif
> +
> +static void l2_config_read(void)
> +{
> +	u32 regval, val;
> +
> +	regval = readl(l2_base + SIFIVE_L2_CONFIG);
> +	val = regval & 0xFF;
> +	pr_info("L2CACHE: No. of Banks in the cache: %d\n", val);
> +	val = (regval & 0xFF00) >> 8;
> +	pr_info("L2CACHE: No. of ways per bank: %d\n", val);
> +	val = (regval & 0xFF0000) >> 16;
> +	pr_info("L2CACHE: Sets per bank: %llu\n", (uint64_t)1 << val);
> +	val = (regval & 0xFF000000) >> 24;
> +	pr_info("L2CACHE: Bytes per cache block: %llu\n", (uint64_t)1 << val);
> +
> +	regval = readl(l2_base + SIFIVE_L2_WAYENABLE);
> +	pr_info("L2CACHE: Index of the largest way enabled: %d\n", regval);
> +}
> +
> +static const struct of_device_id sifive_l2_ids[] = {
> +	{ .compatible = "sifive,fu540-c000-ccache" },
> +	{ /* end of table */ },
> +};
> +
> +static ATOMIC_NOTIFIER_HEAD(l2_err_chain);
> +
> +int register_sifive_l2_error_notifier(struct notifier_block *nb)
> +{
> +	return atomic_notifier_chain_register(&l2_err_chain, nb);
> +}
> +EXPORT_SYMBOL_GPL(register_sifive_l2_error_notifier);
> +
> +int unregister_sifive_l2_error_notifier(struct notifier_block *nb)
> +{
> +	return atomic_notifier_chain_unregister(&l2_err_chain, nb);
> +}
> +EXPORT_SYMBOL_GPL(unregister_sifive_l2_error_notifier);
> +
> +static irqreturn_t l2_int_handler(int irq, void *device)
> +{
> +	unsigned int regval, add_h, add_l;
> +
> +	if (irq == g_irq[DIR_CORR]) {
> +		add_h = readl(l2_base + SIFIVE_L2_DIRECCFIX_HIGH);
> +		add_l = readl(l2_base + SIFIVE_L2_DIRECCFIX_LOW);
> +		pr_err("L2CACHE: DirError @ 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(l2_base + SIFIVE_L2_DIRECCFIX_COUNT);
> +		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
> +					   "DirECCFix");
> +	}
> +	if (irq == g_irq[DATA_CORR]) {
> +		add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH);
> +		add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW);
> +		pr_err("L2CACHE: DataError @ 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(l2_base + SIFIVE_L2_DATECCFIX_COUNT);
> +		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
> +					   "DatECCFix");
> +	}
> +	if (irq == g_irq[DATA_UNCORR]) {
> +		add_h = readl(l2_base + SIFIVE_L2_DATECCFAIL_HIGH);
> +		add_l = readl(l2_base + SIFIVE_L2_DATECCFAIL_LOW);
> +		pr_err("L2CACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(l2_base + SIFIVE_L2_DATECCFAIL_COUNT);
> +		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE,
> +					   "DatECCFail");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +int __init sifive_l2_init(void)
> +{
> +	struct device_node *np;
> +	struct resource res;
> +	int i, rc;
> +
> +	np = of_find_matching_node(NULL, sifive_l2_ids);
> +	if (!np)
> +		return -ENODEV;
> +
> +	if (of_address_to_resource(np, 0, &res))
> +		return -ENODEV;
> +
> +	l2_base = ioremap(res.start, resource_size(&res));
> +	if (!l2_base)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < SIFIVE_L2_MAX_ECCINTR; i++) {
> +		g_irq[i] = irq_of_parse_and_map(np, i);
> +		rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
> +		if (rc) {
> +			pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]);
> +			return rc;
> +		}
> +	}
> +
> +	l2_config_read();
> +
> +#ifdef CONFIG_DEBUG_FS
> +	setup_sifive_debug();
> +#endif
> +	return 0;
> +}
> +device_initcall(sifive_l2_init);
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  2019-05-06 12:18   ` Andrew F. Davis
@ 2019-05-07  6:48     ` Yash Shah
  2019-05-07 13:44       ` Andrew F. Davis
  0 siblings, 1 reply; 8+ messages in thread
From: Yash Shah @ 2019-05-07  6:48 UTC (permalink / raw)
  To: Andrew F. Davis
  Cc: mark.rutland, devicetree, aou, Palmer Dabbelt, linux-kernel,
	Sachin Ghadi, robh+dt, Paul Walmsley, linux-riscv

On Mon, May 6, 2019 at 5:48 PM Andrew F. Davis <afd@ti.com> wrote:
>
> On 5/6/19 6:48 AM, Yash Shah wrote:
> > The driver currently supports only SiFive FU540-C000 platform.
> >
> > The initial version of L2 cache controller driver includes:
> > - Initial configuration reporting at boot up.
> > - Support for ECC related functionality.
> >
> > Signed-off-by: Yash Shah <yash.shah@sifive.com>
> > ---
> >  arch/riscv/include/asm/sifive_l2_cache.h |  16 +++
> >  arch/riscv/mm/Makefile                   |   1 +
> >  arch/riscv/mm/sifive_l2_cache.c          | 175 +++++++++++++++++++++++++++++++
> >  3 files changed, 192 insertions(+)
> >  create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
> >  create mode 100644 arch/riscv/mm/sifive_l2_cache.c
> >
> > diff --git a/arch/riscv/include/asm/sifive_l2_cache.h b/arch/riscv/include/asm/sifive_l2_cache.h
> > new file mode 100644
> > index 0000000..04f6748
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/sifive_l2_cache.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * SiFive L2 Cache Controller header file
> > + *
> > + */
> > +
> > +#ifndef _ASM_RISCV_SIFIVE_L2_CACHE_H
> > +#define _ASM_RISCV_SIFIVE_L2_CACHE_H
> > +
> > +extern int register_sifive_l2_error_notifier(struct notifier_block *nb);
> > +extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb);
> > +
> > +#define SIFIVE_L2_ERR_TYPE_CE 0
> > +#define SIFIVE_L2_ERR_TYPE_UE 1
> > +
> > +#endif /* _ASM_RISCV_SIFIVE_L2_CACHE_H */
> > diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
> > index eb22ab4..1523ee5 100644
> > --- a/arch/riscv/mm/Makefile
> > +++ b/arch/riscv/mm/Makefile
> > @@ -3,3 +3,4 @@ obj-y += fault.o
> >  obj-y += extable.o
> >  obj-y += ioremap.o
> >  obj-y += cacheflush.o
> > +obj-y += sifive_l2_cache.o
> > diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
> > new file mode 100644
> > index 0000000..4eb6461
> > --- /dev/null
> > +++ b/arch/riscv/mm/sifive_l2_cache.c
> > @@ -0,0 +1,175 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * SiFive L2 cache controller Driver
> > + *
> > + * Copyright (C) 2018-2019 SiFive, Inc.
> > + *
> > + */
[...]
> > +
> > +#ifdef CONFIG_DEBUG_FS
> > +static struct dentry *sifive_test;
> > +
> > +static ssize_t l2_write(struct file *file, const char __user *data,
> > +                     size_t count, loff_t *ppos)
> > +{
> > +     unsigned int val;
> > +
> > +     if (kstrtouint_from_user(data, count, 0, &val))
> > +             return -EINVAL;
> > +     if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
>
> I'm guessing bit 16 is the enable and the lower 8 are some kind of
> region to enable the error? This is probably a bad interface, it looks
> useful for testing but doesn't provide any debugging info useful for
> running systems. Do you really want userspace to be able to do this?

Bit 16 selects the type of ECC error (0=data or 1=directory error).
The lower 8 bits toggles (corrupt) that bit index.
Are you suggesting to remove this debug interface altogether or you
want me to improve the current interface?
Something like providing 2 separate debugfs files for data and
directory errors. And create a separate 8-bit debugfs variable to
select the bit index to toggle.

- Yash

>
> Andrew
>

-- 
The information transmitted is intended only for the person or entity to 
which it is addressed and may contain confidential and/or privileged 
material. If you are not the intended recipient of this message please do 
not read, copy, use or disclose this communication and notify the sender 
immediately. It should be noted that any review, retransmission, 
dissemination or other use of, or taking action or reliance upon, this 
information by persons or entities other than the intended recipient is 
prohibited.

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  2019-05-07  6:48     ` Yash Shah
@ 2019-05-07 13:44       ` Andrew F. Davis
  2019-05-08  5:49         ` Yash Shah
  0 siblings, 1 reply; 8+ messages in thread
From: Andrew F. Davis @ 2019-05-07 13:44 UTC (permalink / raw)
  To: Yash Shah
  Cc: mark.rutland, devicetree, aou, Palmer Dabbelt, linux-kernel,
	Sachin Ghadi, robh+dt, Paul Walmsley, linux-riscv

On 5/7/19 2:48 AM, Yash Shah wrote:
> On Mon, May 6, 2019 at 5:48 PM Andrew F. Davis <afd@ti.com> wrote:
>>
>> On 5/6/19 6:48 AM, Yash Shah wrote:
>>> The driver currently supports only SiFive FU540-C000 platform.
>>>
>>> The initial version of L2 cache controller driver includes:
>>> - Initial configuration reporting at boot up.
>>> - Support for ECC related functionality.
>>>
>>> Signed-off-by: Yash Shah <yash.shah@sifive.com>
>>> ---
>>>  arch/riscv/include/asm/sifive_l2_cache.h |  16 +++
>>>  arch/riscv/mm/Makefile                   |   1 +
>>>  arch/riscv/mm/sifive_l2_cache.c          | 175 +++++++++++++++++++++++++++++++
>>>  3 files changed, 192 insertions(+)
>>>  create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
>>>  create mode 100644 arch/riscv/mm/sifive_l2_cache.c
>>>
>>> diff --git a/arch/riscv/include/asm/sifive_l2_cache.h b/arch/riscv/include/asm/sifive_l2_cache.h
>>> new file mode 100644
>>> index 0000000..04f6748
>>> --- /dev/null
>>> +++ b/arch/riscv/include/asm/sifive_l2_cache.h
>>> @@ -0,0 +1,16 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/*
>>> + * SiFive L2 Cache Controller header file
>>> + *
>>> + */
>>> +
>>> +#ifndef _ASM_RISCV_SIFIVE_L2_CACHE_H
>>> +#define _ASM_RISCV_SIFIVE_L2_CACHE_H
>>> +
>>> +extern int register_sifive_l2_error_notifier(struct notifier_block *nb);
>>> +extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb);
>>> +
>>> +#define SIFIVE_L2_ERR_TYPE_CE 0
>>> +#define SIFIVE_L2_ERR_TYPE_UE 1
>>> +
>>> +#endif /* _ASM_RISCV_SIFIVE_L2_CACHE_H */
>>> diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
>>> index eb22ab4..1523ee5 100644
>>> --- a/arch/riscv/mm/Makefile
>>> +++ b/arch/riscv/mm/Makefile
>>> @@ -3,3 +3,4 @@ obj-y += fault.o
>>>  obj-y += extable.o
>>>  obj-y += ioremap.o
>>>  obj-y += cacheflush.o
>>> +obj-y += sifive_l2_cache.o
>>> diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
>>> new file mode 100644
>>> index 0000000..4eb6461
>>> --- /dev/null
>>> +++ b/arch/riscv/mm/sifive_l2_cache.c
>>> @@ -0,0 +1,175 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * SiFive L2 cache controller Driver
>>> + *
>>> + * Copyright (C) 2018-2019 SiFive, Inc.
>>> + *
>>> + */
> [...]
>>> +
>>> +#ifdef CONFIG_DEBUG_FS
>>> +static struct dentry *sifive_test;
>>> +
>>> +static ssize_t l2_write(struct file *file, const char __user *data,
>>> +                     size_t count, loff_t *ppos)
>>> +{
>>> +     unsigned int val;
>>> +
>>> +     if (kstrtouint_from_user(data, count, 0, &val))
>>> +             return -EINVAL;
>>> +     if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
>>
>> I'm guessing bit 16 is the enable and the lower 8 are some kind of
>> region to enable the error? This is probably a bad interface, it looks
>> useful for testing but doesn't provide any debugging info useful for
>> running systems. Do you really want userspace to be able to do this?
> 
> Bit 16 selects the type of ECC error (0=data or 1=directory error).
> The lower 8 bits toggles (corrupt) that bit index.
> Are you suggesting to remove this debug interface altogether or you
> want me to improve the current interface?
> Something like providing 2 separate debugfs files for data and
> directory errors. And create a separate 8-bit debugfs variable to
> select the bit index to toggle.
> 

I was suggesting to remove the whole thing. I don't see it being all
that useful, but it is up to you.

Andrew

> - Yash
> 
>>
>> Andrew
>>
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  2019-05-07 13:44       ` Andrew F. Davis
@ 2019-05-08  5:49         ` Yash Shah
  0 siblings, 0 replies; 8+ messages in thread
From: Yash Shah @ 2019-05-08  5:49 UTC (permalink / raw)
  To: Andrew F. Davis
  Cc: mark.rutland, devicetree, aou, Palmer Dabbelt, linux-kernel,
	Sachin Ghadi, robh+dt, Paul Walmsley, linux-riscv

On Tue, May 7, 2019 at 7:15 PM Andrew F. Davis <afd@ti.com> wrote:
>
> On 5/7/19 2:48 AM, Yash Shah wrote:
> > On Mon, May 6, 2019 at 5:48 PM Andrew F. Davis <afd@ti.com> wrote:
> >>
> >> On 5/6/19 6:48 AM, Yash Shah wrote:
> >>> The driver currently supports only SiFive FU540-C000 platform.
> >>>
> >>> The initial version of L2 cache controller driver includes:
> >>> - Initial configuration reporting at boot up.
> >>> - Support for ECC related functionality.
> >>>
> >>> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> >>> ---
> >>>  arch/riscv/include/asm/sifive_l2_cache.h |  16 +++
> >>>  arch/riscv/mm/Makefile                   |   1 +
> >>>  arch/riscv/mm/sifive_l2_cache.c          | 175 +++++++++++++++++++++++++++++++
> >>>  3 files changed, 192 insertions(+)
> >>>  create mode 100644 arch/riscv/include/asm/sifive_l2_cache.h
> >>>  create mode 100644 arch/riscv/mm/sifive_l2_cache.c
> >>>
> >>> diff --git a/arch/riscv/include/asm/sifive_l2_cache.h b/arch/riscv/include/asm/sifive_l2_cache.h
> >>> new file mode 100644
> >>> index 0000000..04f6748
> >>> --- /dev/null
> >>> +++ b/arch/riscv/include/asm/sifive_l2_cache.h
> >>> @@ -0,0 +1,16 @@
> >>> +/* SPDX-License-Identifier: GPL-2.0 */
> >>> +/*
> >>> + * SiFive L2 Cache Controller header file
> >>> + *
> >>> + */
> >>> +
> >>> +#ifndef _ASM_RISCV_SIFIVE_L2_CACHE_H
> >>> +#define _ASM_RISCV_SIFIVE_L2_CACHE_H
> >>> +
> >>> +extern int register_sifive_l2_error_notifier(struct notifier_block *nb);
> >>> +extern int unregister_sifive_l2_error_notifier(struct notifier_block *nb);
> >>> +
> >>> +#define SIFIVE_L2_ERR_TYPE_CE 0
> >>> +#define SIFIVE_L2_ERR_TYPE_UE 1
> >>> +
> >>> +#endif /* _ASM_RISCV_SIFIVE_L2_CACHE_H */
> >>> diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
> >>> index eb22ab4..1523ee5 100644
> >>> --- a/arch/riscv/mm/Makefile
> >>> +++ b/arch/riscv/mm/Makefile
> >>> @@ -3,3 +3,4 @@ obj-y += fault.o
> >>>  obj-y += extable.o
> >>>  obj-y += ioremap.o
> >>>  obj-y += cacheflush.o
> >>> +obj-y += sifive_l2_cache.o
> >>> diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
> >>> new file mode 100644
> >>> index 0000000..4eb6461
> >>> --- /dev/null
> >>> +++ b/arch/riscv/mm/sifive_l2_cache.c
> >>> @@ -0,0 +1,175 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * SiFive L2 cache controller Driver
> >>> + *
> >>> + * Copyright (C) 2018-2019 SiFive, Inc.
> >>> + *
> >>> + */
> > [...]
> >>> +
> >>> +#ifdef CONFIG_DEBUG_FS
> >>> +static struct dentry *sifive_test;
> >>> +
> >>> +static ssize_t l2_write(struct file *file, const char __user *data,
> >>> +                     size_t count, loff_t *ppos)
> >>> +{
> >>> +     unsigned int val;
> >>> +
> >>> +     if (kstrtouint_from_user(data, count, 0, &val))
> >>> +             return -EINVAL;
> >>> +     if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
> >>
> >> I'm guessing bit 16 is the enable and the lower 8 are some kind of
> >> region to enable the error? This is probably a bad interface, it looks
> >> useful for testing but doesn't provide any debugging info useful for
> >> running systems. Do you really want userspace to be able to do this?
> >
> > Bit 16 selects the type of ECC error (0=data or 1=directory error).
> > The lower 8 bits toggles (corrupt) that bit index.
> > Are you suggesting to remove this debug interface altogether or you
> > want me to improve the current interface?
> > Something like providing 2 separate debugfs files for data and
> > directory errors. And create a separate 8-bit debugfs variable to
> > select the bit index to toggle.
> >
>
> I was suggesting to remove the whole thing. I don't see it being all
> that useful, but it is up to you.

Thanks for the suggestion, but I will keep it as we do need it for our testing.

- Yash

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller
  2019-05-06 10:48 ` [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller Yash Shah
@ 2019-05-13 17:25   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2019-05-13 17:25 UTC (permalink / raw)
  To: Yash Shah
  Cc: mark.rutland, devicetree, aou, palmer, linux-kernel, afd,
	sachin.ghadi, Yash Shah, robh+dt, paul.walmsley, linux-riscv

On Mon,  6 May 2019 16:18:39 +0530, Yash Shah wrote:
> Add device tree bindings for SiFive FU540 L2 cache controller driver
> 
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
>  .../devicetree/bindings/riscv/sifive-l2-cache.txt  | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/riscv/sifive-l2-cache.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-06 10:48 [PATCH v3 0/2] L2 cache controller support for SiFive FU540 Yash Shah
2019-05-06 10:48 ` [PATCH v3 1/2] RISC-V: Add DT documentation for SiFive L2 Cache Controller Yash Shah
2019-05-13 17:25   ` Rob Herring
2019-05-06 10:48 ` [PATCH v3 2/2] RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs Yash Shah
2019-05-06 12:18   ` Andrew F. Davis
2019-05-07  6:48     ` Yash Shah
2019-05-07 13:44       ` Andrew F. Davis
2019-05-08  5:49         ` Yash Shah

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox