Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
* [v4,1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties
@ 2019-09-10 10:42 Biwen Li
  2019-09-10 10:42 ` [v4,2/2] rtc: pcf85263/pcf85363: support PM, wakeup device, improve performance Biwen Li
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Biwen Li @ 2019-09-10 10:42 UTC (permalink / raw)
  To: a.zummo, alexandre.belloni, robh+dt, mark.rutland, leoyang.li
  Cc: linux-rtc, linux-kernel, devicetree, Biwen Li, Martin Fuzzey

Add some properties for pcf85263/pcf85363 as follows:
  - nxp,rtc-interrupt-type: integer type
  - nxp,rtc-interrupt-output-pin: string type
  - quartz-load-femtofarads: integer type
  - nxp,quartz-drive-strength: integer type
  - nxp,quartz-low-jitter: bool type
  - wakeup-source: bool type

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- Drop robust defines in include/dt-bindings/rtc/pcf85363.h
	- Add nxp,rtc-interrupt-type property
	- Replace interrupt-output-pin with nxp,rtc-interrupt-output-pin

Change in v3:
	- None

Change in v2:
	- Replace properties name
	  quartz-load-capacitance -> quartz-load-femtofarads
	  quartz-drive-strength -> nxp,quartz-drive-strength
	  quartz-low-jitter -> nxp,quartz-low-jitter
	- Replace drive strength name
	  PCF85263_QUARTZDRIVE_NORMAL -> PCF85263_QUARTZDRIVE_100ko
	  PCF85263_QUARTZDRIVE_LOW -> PCF85263_QUARTZDRIVE_60ko
	  PCF85263_QUARTZDRIVE_HIGH -> PCF85263_QUARTZDRIVE_500ko
	- Set default interrupt-output-pin as "INTA"

 .../devicetree/bindings/rtc/pcf85363.txt      | 44 ++++++++++++++++++-
 include/dt-bindings/rtc/pcf85363.h            | 14 ++++++
 2 files changed, 57 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/rtc/pcf85363.h

diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt
index 94adc1cf93d9..fc1579463657 100644
--- a/Documentation/devicetree/bindings/rtc/pcf85363.txt
+++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt
@@ -8,10 +8,52 @@ Required properties:
 Optional properties:
 - interrupts: IRQ line for the RTC (not implemented).
 
+- nxp,rtc-interrupt-type: integer property, represent the interrupt's
+  type. Valid values are
+  INT_PIE(periodic interrupt enable),
+  INT_OIE(offset correction interrupt enable),
+  INT_A1IE(alarm1 interrupt enable),
+  INT_A2IE(alarm2 interrupt enable),
+  INT_TSRIE(timestamp register interrupt enable)
+  INT_BSIE(battery switch interrupt enable),
+  INT_WDIE(WatchDog interrupt enable,and
+  compose these values such as: INT_A1IE | INT_A2IE,
+  but currently only support INT_A1IE, default value is INT_A1IE.
+  The property and property nxp,rtc-interrupt-output-pin
+  work together to generate some interrupts on some pins.
+
+- nxp,rtc-interrupt-output-pin: The interrupt output pin must be
+  "INTA" or "INTB", default value is "INTA". The property and property
+  nxp,rtc-interrupt-type work together to generate some interrupts on
+  some pins.
+
+- quartz-load-femtofarads: The internal capacitor to select for the quartz,
+  expressed in femto Farad (fF). Valid values are 6000, 7000 and 12500.
+  Default value is 12500fF.
+
+- nxp,quartz-drive-strength: Drive strength for the quartz,
+  expressed in kilo ohms (kOhm) Valid values are 60, 100 and 500.
+  Default value is 100kOhm.
+
+- nxp,quartz-low-jitter: Boolean property, if present enables low jitter mode
+  which reduces jitter at the cost of increased power consumption.
+
+- wakeup-source: Boolean property, Please refer to
+  Documentation/devicetree/bindings/power/wakeup-source.txt
+
 Example:
 
 pcf85363: pcf85363@51 {
 	compatible = "nxp,pcf85363";
 	reg = <0x51>;
-};
 
+	interrupt-parent = <&gpio1>;
+	interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+	wakeup-source;
+	nxp,rtc-interrupt-output-pin = "INTA";
+	nxp,rtc-interrupt-type = <INT_A1IE>;
+	quartz-load-femtofarads = <12500>;
+	nxp,quartz-drive-strength = <60>;
+	nxp,quartz-low-jitter;
+};
diff --git a/include/dt-bindings/rtc/pcf85363.h b/include/dt-bindings/rtc/pcf85363.h
new file mode 100644
index 000000000000..6340bf2da8f5
--- /dev/null
+++ b/include/dt-bindings/rtc/pcf85363.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_RTC_PCF85363_H
+#define _DT_BINDINGS_RTC_PCF85363_H
+
+/* Interrupt type */
+#define INT_WDIE	(1 << 0)
+#define INT_BSIE	(1 << 1)
+#define INT_TSRIE	(1 << 2)
+#define INT_A2IE	(1 << 3)
+#define INT_A1IE	(1 << 4)
+#define INT_OIE		(1 << 5)
+#define INT_PIE		(1 << 6)
+
+#endif /* _DT_BINDINGS_RTC_PCF85363_H */
-- 
2.17.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 10:42 [v4,1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties Biwen Li
2019-09-10 10:42 ` [v4,2/2] rtc: pcf85263/pcf85363: support PM, wakeup device, improve performance Biwen Li
2019-09-17  1:13 ` [v4,1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties Rob Herring
2019-09-17  8:11   ` [EXT] " Biwen Li
2019-09-17  8:45 ` Alexandre Belloni
2019-09-17  9:13   ` [EXT] " Biwen Li

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org linux-rtc@archiver.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox