Linux-RTC Archive on lore.kernel.org
 help / color / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Cc: linux-kernel@vger.kernel.org, "Lee Jones" <lee.jones@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Sam Ravnborg" <sam@ravnborg.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Heiko Stuebner" <heiko.stuebner@theobroma-systems.com>,
	"Stephan Gerhold" <stephan@gerhold.net>,
	"Lubomir Rintel" <lkundrak@v3.sk>,
	"Mark Brown" <broonie@kernel.org>, allen <allen.chen@ite.com.tw>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	devicetree@vger.kernel.org, linux-pwm@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Josua Mayer" <josua.mayer@jm0.eu>
Subject: Re: [RFC PATCH 04/10] mfd: Add base driver for Netronix embedded controller
Date: Sat, 27 Jun 2020 10:17:38 +0200
Message-ID: <20200627101738.2fe4abc3@aktux> (raw)
In-Reply-To: <20200620224222.1312520-3-j.neuschaefer@gmx.net>

On Sun, 21 Jun 2020 00:42:15 +0200
Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote:

> Third-party hardware documentation is available at
> https://github.com/neuschaefer/linux/wiki/Netronix-MSP430-embedded-controller
> 
> The EC supports interrupts, but the driver doesn't make use of them so
> far.
> 
> Known problems:
> - The reboot handler is installed in such a way that it directly calls
>   into the i2c subsystem to send the reboot command to the EC. This
>   means that the reboot handler may sleep, which is not allowed.
> 
see
https://patchwork.ozlabs.org/project/linux-i2c/patch/20190415213432.8972-3-contact@stefanchrist.eu/

for a fix of such problems. 

> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---
>  drivers/mfd/Kconfig       |   7 ++
>  drivers/mfd/Makefile      |   1 +
>  drivers/mfd/ntxec.c       | 188 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/ntxec.h |  30 ++++++
>  4 files changed, 226 insertions(+)
>  create mode 100644 drivers/mfd/ntxec.c
>  create mode 100644 include/linux/mfd/ntxec.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index a37d7d1713820..78410b928648e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -978,6 +978,13 @@ config MFD_VIPERBOARD
>  	  You need to select the mfd cell drivers separately.
>  	  The drivers do not support all features the board exposes.
> 
> +config MFD_NTXEC
> +	bool "Netronix Embedded Controller"
> +	depends on I2C && OF
> +	help
> +	  Say yes here if you want to support the embedded controller of
> +	  certain e-book readers designed by the ODM Netronix.
> +
>  config MFD_RETU
>  	tristate "Nokia Retu and Tahvo multi-function device"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 9367a92f795a6..19d9391ed6f32 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -218,6 +218,7 @@ obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
>  obj-$(CONFIG_MFD_INTEL_PMC_BXT)	+= intel_pmc_bxt.o
>  obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
>  obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
> +obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
>  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
>  obj-$(CONFIG_MFD_RK808)		+= rk808.o
>  obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
> diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c
> new file mode 100644
> index 0000000000000..82adea34ea746
> --- /dev/null
> +++ b/drivers/mfd/ntxec.c
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright 2020 Jonathan Neuschäfer
> +//
> +// MFD driver for the usually MSP430-based embedded controller used in certain
> +// Netronix ebook reader board designs
> +
> +#include <asm/unaligned.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/ntxec.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm.h>
> +#include <linux/reboot.h>
> +#include <linux/types.h>
> +
> +
> +#define NTXEC_VERSION		0x00
> +#define NTXEC_POWEROFF		0x50
> +#define NTXEC_POWERKEEP		0x70
> +#define NTXEC_RESET		0x90
> +
> +
> +/* Register access */
> +
> +int ntxec_read16(struct ntxec *ec, u8 addr)
> +{
> +	u8 request[1] = { addr };
> +	u8 response[2];
> +	int res;
> +
> +	struct i2c_msg msgs[] = {
> +		{
> +			.addr = ec->client->addr,
> +			.flags = ec->client->flags,
> +			.len = sizeof(request),
> +			.buf = request
> +		}, {
> +			.addr = ec->client->addr,
> +			.flags = ec->client->flags | I2C_M_RD,
> +			.len = sizeof(response),
> +			.buf = response
> +		}
> +	};
> +
> +	res = i2c_transfer(ec->client->adapter, msgs, ARRAY_SIZE(msgs));
> +	if (res < 0)
> +		return res;
> +	if (res != ARRAY_SIZE(msgs))
> +		return -EIO;
> +
> +	return get_unaligned_be16(response);
> +}
> +EXPORT_SYMBOL(ntxec_read16);
> +
> +int ntxec_write16(struct ntxec *ec, u8 addr, u16 value)
> +{
> +	u8 request[3] = { addr, };
> +	int res;
> +
> +	put_unaligned_be16(value, request + 1);
> +
> +	res = i2c_transfer_buffer_flags(ec->client, request, sizeof(request),
> +					ec->client->flags);
> +	if (res < 0)
> +		return res;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(ntxec_write16);
> +
> +int ntxec_read8(struct ntxec *ec, u8 addr)
> +{
> +	int res = ntxec_read16(ec, addr);
> +
> +	if (res < 0)
> +		return res;
> +
> +	return (res >> 8) & 0xff;
> +}
> +EXPORT_SYMBOL(ntxec_read8);
> +
> +int ntxec_write8(struct ntxec *ec, u8 addr, u8 value)
> +{
> +	return ntxec_write16(ec, addr, value << 8);
> +}
> +EXPORT_SYMBOL(ntxec_write8);
> +

do we really need both 16bit and 8bit accessors? If not,
then simply use regmap_i2c_init and set val_bits accordingly.
Maybe just doing the << 8 in the constants?

> +
> +/* Reboot/poweroff handling */
> +
> +static struct ntxec *poweroff_restart_instance;
> +
> +static void ntxec_poweroff(void)
> +{
> +	ntxec_write8(poweroff_restart_instance, NTXEC_POWEROFF, 0x01);
> +	msleep(5000);
> +}
> +
> +static int ntxec_restart(struct notifier_block *nb,
> +		unsigned long action, void *data)
> +{
> +	/* FIXME: The I2C driver sleeps, but restart handlers may not sleep */
> +	ntxec_write8(poweroff_restart_instance, NTXEC_RESET, 0xff);
> +	/* TODO: delay? */
> +	return NOTIFY_DONE;
> +}
> +
> +static struct notifier_block ntxec_restart_handler = {
> +	.notifier_call = ntxec_restart,
> +	.priority = 128
> +};
> +
> +
> +/* Driver setup */
> +
> +static int ntxec_probe(struct i2c_client *client,
> +			    const struct i2c_device_id *ids)
> +{
> +	struct ntxec *ec;
> +	int res;
> +
> +	ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL);
> +	if (!ec)
> +		return -ENOMEM;
> +
> +	ec->dev = &client->dev;
> +	ec->client = client;
> +
> +	/* Determine the firmware version */
> +	res = ntxec_read16(ec, NTXEC_VERSION);
> +	if (res < 0) {
> +		dev_dbg(ec->dev, "Failed to read firmware version number\n");
> +		return res;
> +	}
> +	ec->version = res;
> +
> +	dev_info(ec->dev,
> +		 "Netronix embedded controller version %04x detected.\n",
> +		 ec->version);
> +
> +	/* For now, we don't support the new register layout. */
> +	if (ntxec_has_new_layout(ec))
> +		return -EOPNOTSUPP;
> +
> +	if (of_device_is_system_power_controller(ec->dev->of_node)) {
> +		/*
> +		 * Set the 'powerkeep' bit. This is necessary on some boards
> +		 * in order to keep the system running.
> +		 */
> +		res = ntxec_write8(ec, NTXEC_POWERKEEP, 0x08);
> +		if (res < 0)
> +			return res;
> +
> +		/* Install poweroff handler */
> +		WARN_ON(poweroff_restart_instance);
> +		poweroff_restart_instance = ec;
> +		if (pm_power_off != NULL)
> +			/* TODO: Refactor among all poweroff drivers */
> +			dev_err(ec->dev, "pm_power_off already assigned\n");
> +		else
> +			pm_power_off = ntxec_poweroff;
> +
common pattern, across drivers, so I think doing something else would
be a separate cleanup issue.

Regards,
Andreas

  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-20 22:42 [RFC PATCH 02/10] dt-bindings: Add vendor prefix for Netronix, Inc Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 03/10] dt-bindings: mfd: Add binding for Netronix's embedded controller Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 04/10] mfd: Add base driver for Netronix " Jonathan Neuschäfer
2020-06-22 10:55   ` Lee Jones
2020-06-28  8:11     ` Jonathan Neuschäfer
2020-06-27  8:17   ` Andreas Kemnade [this message]
2020-06-28  8:29     ` Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 05/10] dt-bindings: pwm: Add bindings for PWM function in Netronix EC Jonathan Neuschäfer
2020-06-21 18:41   ` Andreas Kemnade
2020-06-20 22:42 ` [RFC PATCH 06/10] pwm: ntxec: Add driver " Jonathan Neuschäfer
2020-06-22  8:18   ` Uwe Kleine-König
2020-07-03 16:15     ` Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 07/10] dt-bindings: rtc: Add bindings for Netronix embedded controller RTC Jonathan Neuschäfer
2020-06-21  0:02   ` Alexandre Belloni
2020-06-26 21:55     ` Andreas Kemnade
2020-07-03 17:04       ` Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 08/10] rtc: New driver for RTC in Netronix embedded controller Jonathan Neuschäfer
2020-06-21  0:11   ` Alexandre Belloni
2020-07-04 19:23     ` Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 09/10] MAINTAINERS: Add entry for " Jonathan Neuschäfer
2020-06-20 22:42 ` [RFC PATCH 10/10] ARM: dts: imx50-kobo-aura: Add " Jonathan Neuschäfer
2020-06-20 22:46 ` [RFC PATCH 02/10] dt-bindings: Add vendor prefix for Netronix, Inc Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200627101738.2fe4abc3@aktux \
    --to=andreas@kemnade.info \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allen.chen@ite.com.tw \
    --cc=broonie@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=heiko@sntech.de \
    --cc=j.neuschaefer@gmx.net \
    --cc=josua.mayer@jm0.eu \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=lkundrak@v3.sk \
    --cc=mchehab+huawei@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sam@ravnborg.org \
    --cc=shawnguo@kernel.org \
    --cc=stephan@gerhold.net \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RTC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rtc/0 linux-rtc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rtc linux-rtc/ https://lore.kernel.org/linux-rtc \
		linux-rtc@vger.kernel.org
	public-inbox-index linux-rtc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rtc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git