* [PATCH 01/12] regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 02/12] regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property Krzysztof Kozlowski
` (10 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki, stable
The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/regulator/samsung,s5m8767.txt | 21 +++++++------------
drivers/regulator/s5m8767.c | 21 ++++++++-----------
2 files changed, 17 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..d9cff1614f7a 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
@@ -25,19 +33,6 @@ Required properties of the main device node (the parent!):
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
- for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
- property should specify atleast one voltage level (which would be a
- safe operating voltage).
-
- If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, then all the eight voltage values for the
- 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 7c111bbdc2af..35269f998210 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -850,18 +850,15 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
/* DS4 GPIO */
gpio_direction_output(pdata->buck_ds[2], 0x0);
- if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
- pdata->buck4_gpiodvs) {
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK2CTRL, 1 << 1,
- (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK3CTRL, 1 << 1,
- (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK4CTRL, 1 << 1,
- (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
- }
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK2CTRL, 1 << 1,
+ (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK3CTRL, 1 << 1,
+ (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK4CTRL, 1 << 1,
+ (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 02/12] regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 01/12] regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 03/12] clock: dt-bindings: samsung,s2mps11: convert to dtschema Krzysztof Kozlowski
` (9 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki, stable
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index d9cff1614f7a..6cd83d920155 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -39,7 +39,7 @@ Optional properties of the main device node (the parent!):
Additional properties required if either of the optional properties are used:
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
the possible 8 options selectable by the dvs gpios. The value of this
property should be between 0 and 7. If not specified or if out of range, the
default value of this property is set to 0.
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 03/12] clock: dt-bindings: samsung,s2mps11: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 01/12] regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 02/12] regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 04/12] regulator: dt-bindings: samsung,s2m: " Krzysztof Kozlowski
` (8 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the clock provider of Samsung S2MPS11 family of PMICs to DT
schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/clock/samsung,s2mps11.txt | 49 -------------------
.../bindings/clock/samsung,s2mps11.yaml | 45 +++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 46 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
deleted file mode 100644
index 2726c1d58a79..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for Samsung S2M and S5M family clock generator block
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
-outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
-
-To register these as clocks with common clock framework instantiate under
-main device node a sub-node named "clocks".
-
-It uses the common clock binding documented in:
- - Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-
-Required properties of the "clocks" sub-node:
- - #clock-cells: should be 1.
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
- "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
- clocks.
-
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
- Clock ID Devices
- ----------------------------------------------------------
- 32KhzAP 0 S2MPS11/13/14/15, S5M8767
- 32KhzCP 1 S2MPS11/13/15, S5M8767
- 32KhzBT 2 S2MPS11/13/14/15, S5M8767
-
-Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
-in device tree sources.
-
-
-Example:
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
-
- s2m_osc: clocks {
- compatible = "samsung,s2mps11-clk";
- #clock-cells = <1>;
- clock-output-names = "xx", "yy", "zz";
- };
- };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..1410c51e0e7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2M and S5M family clock generator block
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+ outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+ All available clocks are defined as preprocessor macros in
+ dt-bindings/clock/samsung,s2mps11.h header.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mps11-clk
+ - samsung,s2mps13-clk # S2MPS13 and S2MPS15
+ - samsung,s2mps14-clk
+ - samsung,s5m8767-clk
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ minItems: 3
+ maxItems: 3
+ description: Names for AP, CP and BT clocks.
+
+required:
+ - compatible
+ - "#clock-cells"
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 0f28fb4b4e5c..241fe78a3282 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16599,7 +16599,7 @@ M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
-F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
+F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 04/12] regulator: dt-bindings: samsung,s2m: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (2 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 03/12] clock: dt-bindings: samsung,s2mps11: convert to dtschema Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 05/12] regulator: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski
` (7 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the regulators of Samsung
S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02 family of PMICs to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/regulator/samsung,s2mps11.txt | 102 ------------------
.../bindings/regulator/samsung,s2mps11.yaml | 52 +++++++++
.../bindings/regulator/samsung,s2mps13.yaml | 52 +++++++++
.../bindings/regulator/samsung,s2mps14.yaml | 52 +++++++++
.../bindings/regulator/samsung,s2mps15.yaml | 52 +++++++++
.../bindings/regulator/samsung,s2mpu02.yaml | 52 +++++++++
MAINTAINERS | 2 +-
7 files changed, 261 insertions(+), 103 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
deleted file mode 100644
index 27a48bf1b185..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Binding for Samsung S2M family regulator block
-==============================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by different devices:
- - LDOn
- - valid values for n are:
- - S2MPS11: 1 to 38
- - S2MPS13: 1 to 40
- - S2MPS14: 1 to 25
- - S2MPS15: 1 to 27
- - S2MPU02: 1 to 28
- - Example: LDO1, LDO2, LDO28
- - BUCKn
- - valid values for n are:
- - S2MPS11: 1 to 10
- - S2MPS13: 1 to 10
- - S2MPS14: 1 to 5
- - S2MPS15: 1 to 10
- - S2MPU02: 1 to 7
- - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
- 25000 (default) or 50000.
-
- Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
- by setting it to <0>.
-
- Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
- will be set for a particular group of bucks so provide the same
- regulator-ramp-delay value for them.
- Groups sharing ramp rate:
- - buck{1,6},
- - buck{3,4},
- - buck{7,8,10}.
-
- - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
- configured to external control over GPIO. To turn this feature on this
- property must be added to the regulator sub-node:
- - samsung,ext-control-gpios: GPIO specifier for one GPIO
- controlling this regulator (enable/disable)
- Example:
- LDO12 {
- regulator-name = "V_EMMC_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
- };
-
-
-Example:
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..18e1229f7dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPS11 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+patternProperties:
+ # 38 LDOs
+ "^LDO([1-9]|[1-2][0-9]|3[0-8])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 10 bucks
+ "^BUCK([1-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
new file mode 100644
index 000000000000..f0505e225026
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps13.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS13 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPS13 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+patternProperties:
+ # 40 LDOs
+ "^LDO([1-9]|[1-3][0-9]|40)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 10 bucks
+ "^BUCK([1-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
new file mode 100644
index 000000000000..74b2d6b950de
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps14.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS14 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPS14 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+patternProperties:
+ # 25 LDOs
+ "^LDO([1-9]|[1][0-9]|2[0-5])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 5 bucks
+ "^BUCK[1-5]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
new file mode 100644
index 000000000000..527ab1e8b4cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS15 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPS15 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+patternProperties:
+ # 27 LDOs
+ "^LDO([1-9]|[1][0-9]|2[0-7])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 10 bucks
+ "^BUCK([1-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
new file mode 100644
index 000000000000..8fb399561197
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpu02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPU02 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPU02 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+patternProperties:
+ # 28 LDOs
+ "^LDO([1-9]|1[0-9]|2[0-8])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 7 bucks
+ "^BUCK[1-7]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 241fe78a3282..ee486357cf45 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16601,7 +16601,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
-F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
+F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
F: drivers/clk/clk-s2mps11.c
F: drivers/mfd/sec*.c
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 05/12] regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (3 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 04/12] regulator: dt-bindings: samsung,s2m: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski
` (6 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the regulators of Samsung S2MPA01 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/regulator/samsung,s2mpa01.txt | 79 -------------------
.../bindings/regulator/samsung,s2mpa01.yaml | 69 ++++++++++++++++
2 files changed, 69 insertions(+), 79 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
deleted file mode 100644
index bae3c7f838cf..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Binding for Samsung S2MPA01 regulator block
-===========================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPA01 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by S2MPA01 device:
- - LDOn
- - valid values for n are 1 to 26
- - Example: LDO1, LD02, LDO26
- - BUCKn
- - valid values for n are 1 to 10.
- - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of buck regulator nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
- (default), 25000, or 50000. May be 0 for disabling the ramp delay on
- BUCK{1,2,3,4}.
-
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
- Note: Some bucks share the ramp rate setting i.e. same ramp value
- will be set for a particular group of bucks so provide the same
- regulator-ramp-delay value for them.
- Groups sharing ramp rate:
- - buck{1,6},
- - buck{2,4},
- - buck{8,9,10}.
-
-Example:
-
- s2mpa01_pmic@66 {
- compatible = "samsung,s2mpa01-pmic";
- reg = <0x66>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..1fd33550c860
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPA01 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for
+ additional information and example.
+
+patternProperties:
+ # 26 LDOs
+ "^LDO([1-9]|1[0-9]|2[0-6])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 10 bucks
+ "^BUCK([1-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ regulator-ramp-delay:
+ enum: [0, 6250, 12500, 25000, 50000]
+ default: 12500
+ description: |
+ May be 0 for disabling the ramp delay on BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+ Note: Some bucks share the ramp rate setting i.e. same ramp value
+ will be set for a particular group of bucks so provide the same
+ regulator-ramp-delay value for them.
+ Groups sharing ramp rate:
+ * buck{1,6},
+ * buck{2,4},
+ * buck{8,9,10}.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (4 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 05/12] regulator: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 12:21 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 07/12] mfd: dt-bindings: samsung,s2mps11: " Krzysztof Kozlowski
` (5 subsequent siblings)
11 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/regulator/samsung,s5m8767.txt | 23 +----
.../bindings/regulator/samsung,s5m8767.yaml | 83 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 85 insertions(+), 23 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 6cd83d920155..a1c6eb6f07c8 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -48,28 +48,7 @@ Additional properties required if either of the optional properties are used:
for dvs. The format of the gpio specifier depends in the gpio controller.
-Names of regulators supported by S5M8767 device:
- - LDOn
- - valid values for n are 1 to 28
- - Example: LDO1, LDO2, LDO28
- - BUCKn
- - valid values for n are 1 to 9.
- - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - op_mode: describes the different operating modes of the LDO's with
- power mode change in SOC. The different possible values are,
- 0 - always off mode
- 1 - on in normal mode
- 2 - low power mode
- 3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
- GPIO controlling this regulator
- (enable/disable); This is valid only
- for buck9.
+
Example:
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..cf4425eb8e84
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S5M8767 provide buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
+ additional information and example.
+
+patternProperties:
+ # 28 LDOs
+ "^LDO([1-9]|1[0-9]|2[0-8])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ op_mode:
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: |
+ Describes the different operating modes of the LDO's with power mode
+ change in SOC. The different possible values are:
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 8 bucks
+ "^BUCK[1-8]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 9 buck
+ "^BUCK9$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ s5m8767,pmic-ext-control-gpios:
+ maxItems: 1
+ description: |
+ GPIO specifier for one GPIO controlling this regulator on/off.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index ee486357cf45..5a7cb990b182 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16602,7 +16602,7 @@ S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
-F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
+F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
F: drivers/clk/clk-s2mps11.c
F: drivers/mfd/sec*.c
F: drivers/regulator/s2m*.c
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: convert to dtschema
2021-09-28 8:49 ` [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski
@ 2021-09-28 12:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 12:21 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Lee Jones, Liam Girdwood, Mark Brown, linux-clk,
devicetree, linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
On 28/09/2021 10:49, Krzysztof Kozlowski wrote:
> Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../bindings/regulator/samsung,s5m8767.txt | 23 +----
> .../bindings/regulator/samsung,s5m8767.yaml | 83 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 85 insertions(+), 23 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> index 6cd83d920155..a1c6eb6f07c8 100644
> --- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> @@ -48,28 +48,7 @@ Additional properties required if either of the optional properties are used:
> for dvs. The format of the gpio specifier depends in the gpio controller.
>
>
> -Names of regulators supported by S5M8767 device:
> - - LDOn
> - - valid values for n are 1 to 28
> - - Example: LDO1, LDO2, LDO28
> - - BUCKn
> - - valid values for n are 1 to 9.
> - - Example: BUCK1, BUCK2, BUCK9
> -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> -as per the datasheet of device.
> -
> -
> -Optional properties of the nodes under "regulators" sub-node:
> - - op_mode: describes the different operating modes of the LDO's with
> - power mode change in SOC. The different possible values are,
> - 0 - always off mode
> - 1 - on in normal mode
> - 2 - low power mode
> - 3 - suspend mode
> - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
> - GPIO controlling this regulator
> - (enable/disable); This is valid only
> - for buck9.
> +
That's obviously not sufficient - I will remove full file in v2.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 07/12] mfd: dt-bindings: samsung,s2mps11: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (5 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 08/12] mfd: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski
` (4 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the MFD part of Samsung S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02
family of PMICs to DT schema format. Previously the bindings were
mostly in mfd/samsung,sec-core.txt.
The conversion copies parts of description from existing bindings
therefore the license is not changed from GPLv2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/mfd/samsung,s2mps11.yaml | 267 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 268 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..771b3f16da96
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+ which include voltage and current regulators, RTC, clock outputs and other
+ sub-blocks.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mps11-pmic
+ - samsung,s2mps13-pmic
+ - samsung,s2mps14-pmic
+ - samsung,s2mps15-pmic
+ - samsung,s2mpu02-pmic
+
+ clocks:
+ $ref: ../clock/samsung,s2mps11.yaml
+ description:
+ Child node describing clock provider.
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description:
+ List of child nodes that specify the regulators.
+
+ samsung,s2mps11-acokb-ground:
+ description: |
+ Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+ the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+ power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+ low, the rising ACOKB will trigger power off.
+ type: boolean
+
+ samsung,s2mps11-wrstbi-ground:
+ description: |
+ Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+ suspended it will always go down thus triggerring unwanted buck warm
+ reset (setting buck voltages to default values).
+ type: boolean
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps11-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps11.yaml
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps13-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps13.yaml
+ samsung,s2mps11-acokb-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps14-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps14.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mps15-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mps15.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mpu02-pmic
+ then:
+ properties:
+ regulators:
+ $ref: ../regulator/samsung,s2mpu02.yaml
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+ samsung,s2mps11-acokb-ground;
+ wakeup-source;
+
+ clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "vdd_adc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ....
+
+ BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ...
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s2mps14-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VLDO1_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ // ...
+
+ BUCK1 {
+ regulator-name = "VBUCK1_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ...
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a7cb990b182..2de215d1274c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16600,6 +16600,7 @@ L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 08/12] mfd: dt-bindings: samsung,s2mpa01: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (6 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 07/12] mfd: dt-bindings: samsung,s2mps11: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski
` (3 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the MFD part of Samsung S2MPA01 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/mfd/samsung,s2mpa01.yaml | 91 +++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..014e00616c8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The Samsung S2MPA01 is a Power Management IC which include voltage and
+ current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+ compatible:
+ const: samsung,s2mpa01-pmic
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ $ref: ../regulator/samsung,s2mpa01.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s2mpa01-pmic";
+ reg = <0x66>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ // ...
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+
+ // ...
+ };
+ };
+ };
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: convert to dtschema
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (7 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 08/12] mfd: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies Krzysztof Kozlowski
` (2 subsequent siblings)
11 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Convert the MFD part of Samsung S5M8767 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Since all of bindings for Samsung S2M and S5M family of PMICs were
converted from mfd/samsung,sec-core.txt to respective dtschema file,
remove the former one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/mfd/samsung,s5m8767.yaml | 269 ++++++++++++++++++
.../bindings/mfd/samsung,sec-core.txt | 86 ------
MAINTAINERS | 2 +-
3 files changed, 270 insertions(+), 87 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..35018346f68b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The Samsung S5M8767 is a Power Management IC which include voltage and
+ current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+ compatible:
+ const: samsung,s5m8767-pmic
+
+ clocks:
+ $ref: ../clock/samsung,s2mps11.yaml
+ description:
+ Child node describing clock provider.
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ $ref: ../regulator/samsung,s5m8767.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ s5m8767,pmic-buck2-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck2 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck3-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck3 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck4-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck4 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck-ds-gpios:
+ minItems: 3
+ maxItems: 3
+ description: |
+ GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+ It is one-to-one mapped to dvs gpio lines.
+
+ s5m8767,pmic-buck2-uses-gpio-dvs:
+ type: boolean
+ description: buck2 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck3-uses-gpio-dvs:
+ type: boolean
+ description: buck3 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck4-uses-gpio-dvs:
+ type: boolean
+ description: buck4 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck-default-dvs-idx:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minimum: 0
+ maximum: 7
+ default: 0
+ description: |
+ Default voltage setting selected from the possible 8 options selectable
+ by the dvs gpios. The value of this property should be between 0 and 7.
+ If not specified or if out of range, the default value of this property
+ is set to 0.
+
+ s5m8767,pmic-buck-dvs-gpios:
+ minItems: 3
+ maxItems: 3
+ description: |
+ GPIO specifiers for three host gpio's used for dvs.
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+ - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+ s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+ s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+ s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+ - if:
+ required:
+ - s5m8767,pmic-buck2-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck3-uses-gpio-dvs: false
+ s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+ - if:
+ required:
+ - s5m8767,pmic-buck3-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck2-uses-gpio-dvs: false
+ s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+ - if:
+ required:
+ - s5m8767,pmic-buck4-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck2-uses-gpio-dvs: false
+ s5m8767,pmic-buck3-uses-gpio-dvs: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+ <&gpd1 1 GPIO_ACTIVE_LOW>,
+ <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+ <&gpx2 4 GPIO_ACTIVE_LOW>,
+ <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+
+ BUCK1 {
+ regulator-name = "VDD_MIF";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ BUCK2 {
+ regulator-name = "VDD_ARM";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+ <&gpx2 4 GPIO_ACTIVE_LOW>,
+ <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
deleted file mode 100644
index c68cdd365153..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Binding for Samsung S2M and S5M family multi-function device
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-
-The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
-of multi-function devices which include voltage and current regulators, RTC,
-charger controller, clock outputs and other sub-blocks. It is interfaced
-to the host controller using an I2C interface. Each sub-block is usually
-addressed by the host system using different I2C slave addresses.
-
-
-This document describes bindings for main device node. Optional sub-blocks
-must be a sub-nodes to it. Bindings for them can be found in:
- - bindings/regulator/samsung,s2mpa01.txt
- - bindings/regulator/samsung,s2mps11.txt
- - bindings/regulator/samsung,s5m8767.txt
- - bindings/clock/samsung,s2mps11.txt
-
-
-Required properties:
- - compatible: Should be one of the following
- - "samsung,s2mpa01-pmic",
- - "samsung,s2mps11-pmic",
- - "samsung,s2mps13-pmic",
- - "samsung,s2mps14-pmic",
- - "samsung,s2mps15-pmic",
- - "samsung,s2mpu02-pmic",
- - "samsung,s5m8767-pmic".
- - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
- - interrupts: Interrupt specifiers for interrupt sources.
- - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
- down. When the system is suspended it will always go down thus triggerring
- unwanted buck warm reset (setting buck voltages to default values).
- - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
- connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
- register to turn off the power. Usually the ACOKB is pulled up to VBATT so
- when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Example:
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
-
- s2m_osc: clocks {
- compatible = "samsung,s2mps11-clk";
- #clock-cells = <1>;
- clock-output-names = "xx", "yy", "zz";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2de215d1274c..39b4ef4b5a95 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16601,7 +16601,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
-F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
F: drivers/clk/clk-s2mps11.c
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (8 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-30 12:47 ` Lee Jones
2021-09-28 8:49 ` [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '=' Krzysztof Kozlowski
11 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Document the properties with regulator supplies for bucks and LDOs. At
least one board uses it (Exynos5250 Arndale).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/mfd/samsung,s5m8767.yaml | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
index 35018346f68b..e97a94cab4e8 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -96,6 +96,44 @@ properties:
description: |
GPIO specifiers for three host gpio's used for dvs.
+ vinb1-supply:
+ description: Power supply for buck1
+ vinb2-supply:
+ description: Power supply for buck1
+ vinb3-supply:
+ description: Power supply for buck1
+ vinb4-supply:
+ description: Power supply for buck1
+ vinb5-supply:
+ description: Power supply for buck1
+ vinb6-supply:
+ description: Power supply for buck1
+ vinb7-supply:
+ description: Power supply for buck1
+ vinb8-supply:
+ description: Power supply for buck1
+ vinb9-supply:
+ description: Power supply for buck1
+
+ vinl1-supply:
+ description: Power supply for LDO3, LDO10, LDO26, LDO27
+ vinl2-supply:
+ description: Power supply for LDO13, LDO16, LDO25, LDO28
+ vinl3-supply:
+ description: Power supply for LDO11, LDO14
+ vinl4-supply:
+ description: Power supply for LDO4, LDO9
+ vinl5-supply:
+ description: Power supply for LDO12, LDO17, LDO19, LDO23
+ vinl6-supply:
+ description: Power supply for LDO18, LDO20, LDO21, LDO24
+ vinl7-supply:
+ description: Power supply for LDO5, LDO22
+ vinl8-supply:
+ description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
+ vinl9-supply:
+ description: Power supply for LDO2
+
wakeup-source: true
required:
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies
2021-09-28 8:49 ` [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies Krzysztof Kozlowski
@ 2021-09-30 12:47 ` Lee Jones
2021-09-30 13:16 ` Krzysztof Kozlowski
0 siblings, 1 reply; 19+ messages in thread
From: Lee Jones @ 2021-09-30 12:47 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Michael Turquette, Stephen Boyd, Rob Herring,
Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Liam Girdwood, Mark Brown, linux-clk, devicetree,
linux-kernel, linux-samsung-soc, linux-arm-kernel,
Marek Szyprowski, Sylwester Nawrocki
On Tue, 28 Sep 2021, Krzysztof Kozlowski wrote:
> Document the properties with regulator supplies for bucks and LDOs. At
> least one board uses it (Exynos5250 Arndale).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../bindings/mfd/samsung,s5m8767.yaml | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
These all need Rob's Ack.
But can you start with reworking the subject line please.
It should be:
"dt-bindings: mfd: <component>: <Subject starting with an uppercase char>"
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
> index 35018346f68b..e97a94cab4e8 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
> +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
> @@ -96,6 +96,44 @@ properties:
> description: |
> GPIO specifiers for three host gpio's used for dvs.
>
> + vinb1-supply:
> + description: Power supply for buck1
> + vinb2-supply:
> + description: Power supply for buck1
> + vinb3-supply:
> + description: Power supply for buck1
> + vinb4-supply:
> + description: Power supply for buck1
> + vinb5-supply:
> + description: Power supply for buck1
> + vinb6-supply:
> + description: Power supply for buck1
> + vinb7-supply:
> + description: Power supply for buck1
> + vinb8-supply:
> + description: Power supply for buck1
> + vinb9-supply:
> + description: Power supply for buck1
> +
> + vinl1-supply:
> + description: Power supply for LDO3, LDO10, LDO26, LDO27
> + vinl2-supply:
> + description: Power supply for LDO13, LDO16, LDO25, LDO28
> + vinl3-supply:
> + description: Power supply for LDO11, LDO14
> + vinl4-supply:
> + description: Power supply for LDO4, LDO9
> + vinl5-supply:
> + description: Power supply for LDO12, LDO17, LDO19, LDO23
> + vinl6-supply:
> + description: Power supply for LDO18, LDO20, LDO21, LDO24
> + vinl7-supply:
> + description: Power supply for LDO5, LDO22
> + vinl8-supply:
> + description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
> + vinl9-supply:
> + description: Power supply for LDO2
> +
> wakeup-source: true
>
> required:
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies
2021-09-30 12:47 ` Lee Jones
@ 2021-09-30 13:16 ` Krzysztof Kozlowski
2021-09-30 13:21 ` Lee Jones
0 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-30 13:16 UTC (permalink / raw)
To: Lee Jones
Cc: Michael Turquette, Stephen Boyd, Rob Herring,
Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Liam Girdwood, Mark Brown, linux-clk, devicetree,
linux-kernel, linux-samsung-soc, linux-arm-kernel,
Marek Szyprowski, Sylwester Nawrocki
On 30/09/2021 14:47, Lee Jones wrote:
> On Tue, 28 Sep 2021, Krzysztof Kozlowski wrote:
>
>> Document the properties with regulator supplies for bucks and LDOs. At
>> least one board uses it (Exynos5250 Arndale).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> ---
>> .../bindings/mfd/samsung,s5m8767.yaml | 38 +++++++++++++++++++
>> 1 file changed, 38 insertions(+)
>
> These all need Rob's Ack.
Correct.
>
> But can you start with reworking the subject line please.
>
> It should be:
>
> "dt-bindings: mfd: <component>: <Subject starting with an uppercase char>"
Sure, just have in mind that Mark wants them the other way around for
regulator. :)
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies
2021-09-30 13:16 ` Krzysztof Kozlowski
@ 2021-09-30 13:21 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2021-09-30 13:21 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Michael Turquette, Stephen Boyd, Rob Herring,
Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Liam Girdwood, Mark Brown, linux-clk, devicetree,
linux-kernel, linux-samsung-soc, linux-arm-kernel,
Marek Szyprowski, Sylwester Nawrocki
On Thu, 30 Sep 2021, Krzysztof Kozlowski wrote:
> On 30/09/2021 14:47, Lee Jones wrote:
> > On Tue, 28 Sep 2021, Krzysztof Kozlowski wrote:
> >
> >> Document the properties with regulator supplies for bucks and LDOs. At
> >> least one board uses it (Exynos5250 Arndale).
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> >> ---
> >> .../bindings/mfd/samsung,s5m8767.yaml | 38 +++++++++++++++++++
> >> 1 file changed, 38 insertions(+)
> >
> > These all need Rob's Ack.
>
> Correct.
>
> >
> > But can you start with reworking the subject line please.
> >
> > It should be:
> >
> > "dt-bindings: mfd: <component>: <Subject starting with an uppercase char>"
>
> Sure, just have in mind that Mark wants them the other way around for
> regulator. :)
a) I'm suggesting you use the standard formatting
b) This is not a regulator patch :)
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (9 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-30 11:47 ` (subset) " Krzysztof Kozlowski
2021-09-28 8:49 ` [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '=' Krzysztof Kozlowski
11 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS
GPIO is not enabled. Although previously bindings required providing
this safe DVS voltage, but since commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") this
was ignored.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a771542e28b8..3583095fbb2a 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -240,9 +240,6 @@ pmic@66 {
vinl8-supply = <&buck8_reg>;
vinl9-supply = <&buck8_reg>;
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
<&gpd1 1 GPIO_ACTIVE_HIGH>,
<&gpd1 2 GPIO_ACTIVE_HIGH>;
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: (subset) [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
2021-09-28 8:49 ` [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale Krzysztof Kozlowski
@ 2021-09-30 11:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-30 11:47 UTC (permalink / raw)
To: Stephen Boyd, linux-clk, Liam Girdwood, linux-kernel,
Tomasz Figa, linux-arm-kernel, devicetree,
Bartlomiej Zolnierkiewicz, Rob Herring, linux-samsung-soc,
Krzysztof Kozlowski, Mark Brown, Sylwester Nawrocki, Lee Jones,
Michael Turquette, Chanwoo Choi
Cc: Marek Szyprowski, Sylwester Nawrocki
On Tue, 28 Sep 2021 10:49:48 +0200, Krzysztof Kozlowski wrote:
> The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS
> GPIO is not enabled. Although previously bindings required providing
> this safe DVS voltage, but since commit 04f9f068a619 ("regulator:
> s5m8767: Modify parsing method of the voltage table of buck2/3/4") this
> was ignored.
>
>
> [...]
Applied, thanks!
[11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
commit: 1d775cc371620caa12cb404771edbab944b1caba
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '='
2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski
` (10 preceding siblings ...)
2021-09-28 8:49 ` [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale Krzysztof Kozlowski
@ 2021-09-28 8:49 ` Krzysztof Kozlowski
2021-09-30 11:47 ` (subset) " Krzysztof Kozlowski
11 siblings, 1 reply; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-28 8:49 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Lee Jones,
Liam Girdwood, Mark Brown, linux-clk, devicetree, linux-kernel,
linux-samsung-soc, linux-arm-kernel
Cc: Marek Szyprowski, Sylwester Nawrocki
Use spaces in Origen boards instead of tabs around '=' for simple
property assignments, to match coding style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 24 ++++++++++++------------
arch/arm/boot/dts/exynos4412-origen.dts | 14 +++++++-------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 1c5394152561..435fda60e86d 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -206,74 +206,74 @@ ldo3_reg: LDO3 {
ldo4_reg: LDO4 {
regulator-name = "VDD_RTC_1.8V";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "VDD_AUD_1.8V";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "VADC_3.3V";
regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
ldo9_reg: LDO9 {
regulator-name = "DVDD_SWB_2.8V";
regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "VDD_PLL_1.1V";
regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "VDD_AUD_3V";
regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
};
ldo14_reg: LDO14 {
regulator-name = "AVDD18_SWB_1.8V";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "VDD_SWB_3.3V";
regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo21_reg: LDO21 {
regulator-name = "VDD_MIF_1.2V";
regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "VDD_ARM_1.2V";
regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
@@ -281,7 +281,7 @@ buck1_reg: BUCK1 {
buck2_reg: BUCK2 {
regulator-name = "VDD_INT_1.1V";
regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 5479ef09f9f3..e6aec5facabf 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -382,7 +382,7 @@ ldo28_reg: LDO28 {
buck1_reg: BUCK1 {
regulator-name = "VDD_MIF";
regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -391,7 +391,7 @@ buck1_reg: BUCK1 {
buck2_reg: BUCK2 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -400,7 +400,7 @@ buck2_reg: BUCK2 {
buck3_reg: BUCK3 {
regulator-name = "VDD_INT";
regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -409,7 +409,7 @@ buck3_reg: BUCK3 {
buck4_reg: BUCK4 {
regulator-name = "VDD_G3D";
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -418,7 +418,7 @@ buck4_reg: BUCK4 {
buck5_reg: BUCK5 {
regulator-name = "VDD_M12";
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -427,7 +427,7 @@ buck5_reg: BUCK5 {
buck6_reg: BUCK6 {
regulator-name = "VDD12_5M";
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
@@ -436,7 +436,7 @@ buck6_reg: BUCK6 {
buck9_reg: BUCK9 {
regulator-name = "VDDF28_EMMC";
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
--
2.30.2
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: (subset) [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '='
2021-09-28 8:49 ` [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '=' Krzysztof Kozlowski
@ 2021-09-30 11:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 19+ messages in thread
From: Krzysztof Kozlowski @ 2021-09-30 11:47 UTC (permalink / raw)
To: Liam Girdwood, Stephen Boyd, linux-clk, Tomasz Figa,
linux-kernel, linux-arm-kernel, devicetree,
Bartlomiej Zolnierkiewicz, Rob Herring, Krzysztof Kozlowski,
linux-samsung-soc, Sylwester Nawrocki, Lee Jones, Mark Brown,
Michael Turquette, Chanwoo Choi
Cc: Marek Szyprowski, Sylwester Nawrocki
On Tue, 28 Sep 2021 10:49:49 +0200, Krzysztof Kozlowski wrote:
> Use spaces in Origen boards instead of tabs around '=' for simple
> property assignments, to match coding style.
>
>
Applied, thanks!
[12/12] ARM: dts: exynos: use spaces instead of tabs around '='
commit: 7ec804d6025c952e3122ad7fe768178efca3300e
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
^ permalink raw reply [flat|nested] 19+ messages in thread