From: Akash Asthana <akashast@codeaurora.org>
To: gregkh@linuxfoundation.org, agross@kernel.org,
bjorn.andersson@linaro.org, wsa@the-dreams.de,
broonie@kernel.org, mark.rutland@arm.com, robh+dt@kernel.org,
georgi.djakov@linaro.org
Cc: linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, swboyd@chromium.org,
mgautam@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-serial@vger.kernel.org, mka@chromium.org,
dianders@chromium.org, evgreen@chromium.org,
Akash Asthana <akashast@codeaurora.org>
Subject: [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
Date: Wed, 15 Apr 2020 15:53:13 +0530 [thread overview]
Message-ID: <1586946198-13912-5-git-send-email-akashast@codeaurora.org> (raw)
In-Reply-To: <1586946198-13912-1-git-send-email-akashast@codeaurora.org>
QUP core clock is shared among all the SE drivers present on particular
QUP wrapper, the system will reset(unclocked access) if earlycon used after
QUP core clock is put to 0 from other SE drivers before real console comes
up.
As earlycon can't vote for it's QUP core need, to fix this add ICC
support to common/QUP wrapper driver and put vote for QUP core from
probe on behalf of earlycon and remove vote during earlycon exit call.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
---
Change in V3:
- Add geni_remove_earlycon_icc_vote API that will be used by earlycon
exit function to remove ICC vote for earlyconsole.
- Remove suspend/resume hook for geni-se driver as we are no longer
removing earlyconsole ICC vote from system suspend, we are removing
from earlycon exit.
Change in V4:
- As per Matthias comment make 'earlycon_wrapper' as static structure.
drivers/soc/qcom/qcom-geni-se.c | 50 +++++++++++++++++++++++++++++++++++
drivers/tty/serial/qcom_geni_serial.c | 7 +++++
include/linux/qcom-geni-se.h | 2 ++
3 files changed, 59 insertions(+)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 1527bc4..727ad2e 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -90,8 +90,11 @@ struct geni_wrapper {
struct device *dev;
void __iomem *base;
struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+ struct geni_icc_path to_core;
};
+static struct geni_wrapper *earlycon_wrapper;
+
#define QUP_HW_VER_REG 0x4
/* Common SE registers */
@@ -781,6 +784,26 @@ int geni_icc_vote_off(struct geni_se *se)
}
EXPORT_SYMBOL(geni_icc_vote_off);
+void geni_remove_earlycon_icc_vote(void)
+{
+ struct geni_wrapper *wrapper = earlycon_wrapper;
+ struct device_node *parent = of_get_next_parent(wrapper->dev->of_node);
+ struct device_node *child;
+
+ for_each_child_of_node(parent, child) {
+ if (of_device_is_compatible(child, "qcom,geni-se-qup")) {
+ wrapper = platform_get_drvdata(of_find_device_by_node(
+ child));
+ icc_put(wrapper->to_core.path);
+ wrapper->to_core.path = NULL;
+ }
+ }
+ of_node_put(parent);
+
+ earlycon_wrapper = NULL;
+}
+EXPORT_SYMBOL(geni_remove_earlycon_icc_vote);
+
static int geni_se_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -808,6 +831,33 @@ static int geni_se_probe(struct platform_device *pdev)
}
}
+#ifdef CONFIG_SERIAL_EARLYCON
+ wrapper->to_core.path = devm_of_icc_get(dev, "qup-core");
+ if (IS_ERR(wrapper->to_core.path))
+ return PTR_ERR(wrapper->to_core.path);
+ /*
+ * Put minmal BW request on core clocks on behalf of early console.
+ * The vote will be removed earlycon exit function.
+ *
+ * Note: We are putting vote on each QUP wrapper instead only to which
+ * earlycon is connected because QUP core clock of different wrapper
+ * share same voltage domain. If core1 is put to 0, then core2 will
+ * also run at 0, if not voted. Default ICC vote will be removed ASA
+ * we touch any of the core clock.
+ * core1 = core2 = max(core1, core2)
+ */
+ ret = icc_set_bw(wrapper->to_core.path, GENI_DEFAULT_BW, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ICC BW voting failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ if (of_get_compatible_child(pdev->dev.of_node, "qcom,geni-debug-uart"))
+ earlycon_wrapper = wrapper;
+ of_node_put(pdev->dev.of_node);
+#endif
+
dev_set_drvdata(dev, wrapper);
dev_dbg(dev, "GENI SE Driver probed\n");
return devm_of_platform_populate(dev);
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 6119090..8c5d97c 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1090,6 +1090,12 @@ static void qcom_geni_serial_earlycon_write(struct console *con,
__qcom_geni_serial_console_write(&dev->port, s, n);
}
+static int qcom_geni_serial_earlycon_exit(struct console *con)
+{
+ geni_remove_earlycon_icc_vote();
+ return 0;
+}
+
static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
const char *opt)
{
@@ -1135,6 +1141,7 @@ static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
dev->con->write = qcom_geni_serial_earlycon_write;
+ dev->con->exit = qcom_geni_serial_earlycon_exit;
dev->con->setup = NULL;
return 0;
}
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index b5b9316..cf2b8d4 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -447,5 +447,7 @@ int geni_icc_get(struct geni_se *se, const char *icc_ddr);
int geni_icc_vote_on(struct geni_se *se);
int geni_icc_vote_off(struct geni_se *se);
+
+void geni_remove_earlycon_icc_vote(void);
#endif
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-04-15 10:39 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-15 10:23 [PATCH V4 0/9] Add interconnect support to QSPI and QUP drivers Akash Asthana
2020-04-15 10:23 ` [PATCH V4 1/9] interconnect: Add devm_of_icc_get() as exported API for users Akash Asthana
2020-04-28 16:04 ` Georgi Djakov
2020-04-15 10:23 ` [PATCH V4 2/9] interconnect: Set peak requirement as twice of average Akash Asthana
2020-04-23 9:31 ` Georgi Djakov
2020-04-28 9:46 ` Akash Asthana
2020-04-28 10:53 ` Georgi Djakov
2020-04-15 10:23 ` [PATCH V4 3/9] soc: qcom: geni: Support for ICC voting Akash Asthana
2020-04-15 23:36 ` Matthias Kaehlcke
2020-04-28 9:48 ` Akash Asthana
2020-04-15 10:23 ` Akash Asthana [this message]
2020-04-16 0:31 ` [PATCH V4 4/9] soc: qcom-geni-se: Add interconnect support to fix earlycon crash Matthias Kaehlcke
2020-04-28 10:21 ` Akash Asthana
2020-04-28 15:48 ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 5/9] i2c: i2c-qcom-geni: Add interconnect support Akash Asthana
2020-04-16 17:09 ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 6/9] spi: spi-geni-qcom: " Akash Asthana
2020-04-15 11:39 ` Mark Brown
2020-04-15 10:23 ` [PATCH V4 7/9] tty: serial: qcom_geni_serial: " Akash Asthana
2020-04-16 17:17 ` Matthias Kaehlcke
2020-04-15 10:23 ` [PATCH V4 8/9] spi: spi-qcom-qspi: " Akash Asthana
2020-04-15 10:23 ` [PATCH V4 9/9] arm64: dts: sc7180: Add interconnect for QUP and QSPI Akash Asthana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586946198-13912-5-git-send-email-akashast@codeaurora.org \
--to=akashast@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).