* [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support
@ 2022-04-12 11:03 Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Rohit Agarwal @ 2022-04-12 11:03 UTC (permalink / raw)
To: agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel, Rohit Agarwal
Hello,
This series adds the devicetree nodes to support the interconnect, USB3 and PHY support.
Thanks,
Rohit.
Rohit Agarwal (4):
ARM: dts: qcom: sdx65: Add interconnect nodes
dt-bindings: usb: qcom,dwc3: Add binding for SDX65
ARM: dts: qcom: sdx65: Add USB3 and PHY support
ARM: dts: qcom: sdx65-mtp: Enable USB3 and PHY support
.../devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++-
arch/arm/boot/dts/qcom-sdx65.dtsi | 108 +++++++++++++++++++++
3 files changed, 134 insertions(+), 4 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
@ 2022-04-12 11:03 ` Rohit Agarwal
2022-04-12 11:19 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Rohit Agarwal @ 2022-04-12 11:03 UTC (permalink / raw)
To: agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel, Rohit Agarwal
Add interconnect devicetree nodes in SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 8fef644..3e4dc63 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -143,6 +143,26 @@
status = "disabled";
};
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sdx65-system-noc";
+ reg = <0x1620000 0x31200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mem_noc: interconnect@9680000 {
+ compatible = "qcom,sdx65-mem-noc";
+ reg = <0x9680000 0x27200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect {
+ compatible = "qcom,sdx65-mc-virt";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
@@ -405,6 +425,11 @@
};
};
};
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
+
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
@ 2022-04-12 11:03 ` Rohit Agarwal
2022-04-12 11:20 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Rohit Agarwal
2022-04-12 11:03 ` [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable " Rohit Agarwal
3 siblings, 1 reply; 8+ messages in thread
From: Rohit Agarwal @ 2022-04-12 11:03 UTC (permalink / raw)
To: agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel, Rohit Agarwal
Add devicetree binding for SDX65 USB controller based on
Qcom designware IP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index ce252db..2d73b03 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -24,6 +24,7 @@ properties:
- qcom,sdm660-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
- qcom,sm4250-dwc3
- qcom,sm6115-dwc3
- qcom,sm6350-dwc3
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
@ 2022-04-12 11:03 ` Rohit Agarwal
2022-04-12 11:21 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable " Rohit Agarwal
3 siblings, 1 reply; 8+ messages in thread
From: Rohit Agarwal @ 2022-04-12 11:03 UTC (permalink / raw)
To: agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel, Rohit Agarwal
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
SNPS HS PHY on SDX65.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 3e4dc63..e419e47 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -130,6 +130,7 @@
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -143,6 +144,45 @@
status = "disabled";
};
+ usb_hsphy: hsphy@ff4000 {
+ compatible = "qcom,usb-snps-hs-7nm-phy";
+ reg = <0xff4000 0x120>;
+ #phy-cells = <0>;
+ status = "disabled";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c8>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6e00 0x160>,
+ <0x00ff7000 0x1ec>,
+ <0x00ff6200 0x1e00>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
system_noc: interconnect@1620000 {
compatible = "qcom,sdx65-system-noc";
reg = <0x1620000 0x31200>;
@@ -182,6 +222,49 @@
status = "disabled";
};
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 18 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "ss_phy_irq", "dm_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable USB3 and PHY support
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
` (2 preceding siblings ...)
2022-04-12 11:03 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Rohit Agarwal
@ 2022-04-12 11:03 ` Rohit Agarwal
3 siblings, 0 replies; 8+ messages in thread
From: Rohit Agarwal @ 2022-04-12 11:03 UTC (permalink / raw)
To: agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel, Rohit Agarwal
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 79dc31a..6920524 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -123,7 +123,7 @@
regulator-max-microvolt = <1300000>;
};
- ldo1 {
+ vreg_l1b_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -141,13 +141,13 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo4 {
+ vreg_l4b_0p88: ldo4 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo5 {
+ vreg_l5b_1p8: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -177,7 +177,7 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo10 {
+ vreg_l10b_3p08: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -244,3 +244,24 @@
};
};
};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4b_0p88>;
+ vdda33-supply = <&vreg_l10b_3p08>;
+ vdda18-supply = <&vreg_l5b_1p8>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
@ 2022-04-12 11:19 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-12 11:19 UTC (permalink / raw)
To: Rohit Agarwal, agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel
On 12/04/2022 13:03, Rohit Agarwal wrote:
> Add interconnect devicetree nodes in SDX65 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
> };
> +
> + apps_bcm_voter: bcm_voter {
No underscores in node names. This will break upcoming schema.
> + compatible = "qcom,bcm-voter";
> + };
> +
> };
> };
>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
@ 2022-04-12 11:20 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-12 11:20 UTC (permalink / raw)
To: Rohit Agarwal, agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel
On 12/04/2022 13:03, Rohit Agarwal wrote:
> Add devicetree binding for SDX65 USB controller based on
> Qcom designware IP.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
> Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support
2022-04-12 11:03 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Rohit Agarwal
@ 2022-04-12 11:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-12 11:21 UTC (permalink / raw)
To: Rohit Agarwal, agross, bjorn.andersson, gregkh, robh+dt, krzk+dt
Cc: manivannan.sadhasivam, linux-arm-msm, linux-usb, devicetree,
linux-kernel
On 12/04/2022 13:03, Rohit Agarwal wrote:
> Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
> SNPS HS PHY on SDX65.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
> arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index 3e4dc63..e419e47 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -130,6 +130,7 @@
> reg = <0x00100000 0x001f7400>;
> clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
> clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
> + #power-domain-cells = <1>;
> #clock-cells = <1>;
> #reset-cells = <1>;
> };
> @@ -143,6 +144,45 @@
> status = "disabled";
> };
>
> + usb_hsphy: hsphy@ff4000 {
Generic node names, so "phy".
> + compatible = "qcom,usb-snps-hs-7nm-phy";
> + reg = <0xff4000 0x120>;
> + #phy-cells = <0>;
> + status = "disabled";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
> + resets = <&gcc GCC_QUSB2PHY_BCR>;
> + };
> +
> + usb_qmpphy: phy@ff6000 {
> + compatible = "qcom,sdx65-qmp-usb3-uni-phy";
> + reg = <0x00ff6000 0x1c8>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
> + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> + <&gcc GCC_USB3_PRIM_CLKREF_EN>;
> + clock-names = "aux", "cfg_ahb", "ref";
> +
> + resets = <&gcc GCC_USB3PHY_PHY_BCR>,
> + <&gcc GCC_USB3_PHY_BCR>;
> + reset-names = "phy", "common";
> +
> + usb_ssphy: phy@ff6200 {
> + reg = <0x00ff6e00 0x160>,
> + <0x00ff7000 0x1ec>,
> + <0x00ff6200 0x1e00>;
> + #phy-cells = <0>;
> + #clock-cells = <0>;
> + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
> + clock-names = "pipe0";
> + clock-output-names = "usb3_uni_phy_pipe_clk_src";
> + };
> + };
> +
> system_noc: interconnect@1620000 {
> compatible = "qcom,sdx65-system-noc";
> reg = <0x1620000 0x31200>;
> @@ -182,6 +222,49 @@
> status = "disabled";
> };
>
> + usb: usb@a6f8800 {
> + compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
> + reg = <0x0a6f8800 0x400>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
> + <&gcc GCC_USB30_MASTER_CLK>,
> + <&gcc GCC_USB30_MSTR_AXI_CLK>,
> + <&gcc GCC_USB30_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_SLEEP_CLK>;
> + clock-names = "cfg_noc", "core", "iface", "mock_utmi",
> + "sleep";
> +
> + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
> + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 18 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> + "ss_phy_irq", "dm_hs_phy_irq";
> +
> + power-domains = <&gcc USB30_GDSC>;
> +
> + resets = <&gcc GCC_USB30_BCR>;
> +
> + usb_dwc3: dwc3@a600000 {
usb. Please test your changes with `make dtbs_check`. This should
clearly fail.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-04-12 12:19 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
2022-04-12 11:19 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
2022-04-12 11:20 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Rohit Agarwal
2022-04-12 11:21 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable " Rohit Agarwal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).