Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support
@ 2019-10-04 16:28 JC Kuo
  2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
                   ` (7 more replies)
  0 siblings, 8 replies; 11+ messages in thread
From: JC Kuo @ 2019-10-04 16:28 UTC (permalink / raw)
  To: gregkh, thierry.reding, jonathanh
  Cc: linux-tegra, linux-usb, linux-kernel, devicetree, nkristam,
	skomatineni, JC Kuo

Hi,

This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.

Changelog:
v3:
  add change log to cover latter

v2:
  xhci: tegra: Parameterize mailbox register addresses
   - no change

  usb: host: xhci-tegra: Add Tegra194 XHCI support
   - no change

  phy: tegra: xusb: Protect Tegra186 soc with config
   - new patch to protect Tegra186 soc data with config

  phy: tegra: xusb: Add Tegra194 support
   - removed unnecessary #if/#endif pairs
   - introduce new soc->supports_gen2 flag which indicate whether or not
     a soc supports USB 3.1 Gen 2 speed

  dt-bindings: phy: tegra: Add Tegra194 support
   - fix a typo

  arm64: tegra: Add XUSB and pad controller on Tegra194
   - renamed xhci@3610000 with usb@3610000
   - moved padctl@3520000 and usb@3610000 inside /cbb
   - cleaned up "clocks" property of usb@3610000 node
   - added blanks lines to visually separate blocks

  arm64: tegra: Enable XUSB host in P2972-0000 board
   - use capitalization of regulator names
   - fix gpio property of VDD_5V_SATA regulator

JC Kuo (7):
  xhci: tegra: Parameterize mailbox register addresses
  usb: host: xhci-tegra: Add Tegra194 XHCI support
  phy: tegra: xusb: Protect Tegra186 soc with config
  phy: tegra: xusb: Add Tegra194 support
  dt-bindings: phy: tegra: Add Tegra194 support
  arm64: tegra: Add XUSB and pad controller on Tegra194
  arm64: tegra: Enable XUSB host in P2972-0000 board

 .../phy/nvidia,tegra124-xusb-padctl.txt       |  16 ++
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  36 ++++-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  62 ++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 139 +++++++++++++++++
 drivers/phy/tegra/Makefile                    |   1 +
 drivers/phy/tegra/xusb-tegra186.c             | 144 +++++++++++++-----
 drivers/phy/tegra/xusb.c                      |   7 +
 drivers/phy/tegra/xusb.h                      |   6 +
 drivers/usb/host/xhci-tegra.c                 |  88 +++++++++--
 9 files changed, 448 insertions(+), 51 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-04 16:28 [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support JC Kuo
2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
2019-10-04 16:29 ` [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo
2019-10-04 16:29 ` [PATCH v3 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2019-10-04 16:29 ` [PATCH v3 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo
2019-10-04 16:29 ` [PATCH v3 5/7] dt-bindings: phy: tegra: " JC Kuo
2019-10-04 16:29 ` [PATCH v3 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2019-10-04 16:29 ` [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
2019-10-07 11:03 ` [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support Greg KH
2019-10-08 11:29   ` Thierry Reding
2019-10-09  2:23     ` JC Kuo

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git