From: Chanwoo Choi <cwchoi00@gmail.com>
To: Marek Vasut <marex@denx.de>, linux-usb@vger.kernel.org
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Yassine Oudjana <y.oudjana@protonmail.com>
Subject: Re: [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support
Date: Wed, 24 Aug 2022 07:36:52 +0900 [thread overview]
Message-ID: <7eea5047-01eb-cdb0-654e-f05e210e2f08@gmail.com> (raw)
In-Reply-To: <20220730180500.152004-2-marex@denx.de>
On 22. 7. 31. 03:05, Marek Vasut wrote:
> The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
> which can expose details collected by the TUSB320 in a far more
> precise way than extcon. Since there are existing users in the
> kernel and in DT which depend on the extcon interface, keep it
> for now.
>
> Add TYPE-C interface and expose the supported supply current,
> direction and connector polarity via the TYPE-C interface.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Yassine Oudjana <y.oudjana@protonmail.com>
> To: linux-usb@vger.kernel.org
> ---
> drivers/extcon/Kconfig | 2 +-
> drivers/extcon/extcon-usbc-tusb320.c | 159 +++++++++++++++++++++++++++
> 2 files changed, 160 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
> index c69d40ae5619a..7684b3afa6304 100644
> --- a/drivers/extcon/Kconfig
> +++ b/drivers/extcon/Kconfig
> @@ -180,7 +180,7 @@ config EXTCON_USBC_CROS_EC
>
> config EXTCON_USBC_TUSB320
> tristate "TI TUSB320 USB-C extcon support"
> - depends on I2C
> + depends on I2C && TYPEC
> select REGMAP_I2C
> help
> Say Y here to enable support for USB Type C cable detection extcon
> diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
> index aced4bbb455dc..edb8c3f997c91 100644
> --- a/drivers/extcon/extcon-usbc-tusb320.c
> +++ b/drivers/extcon/extcon-usbc-tusb320.c
> @@ -6,6 +6,7 @@
> * Author: Michael Auchter <michael.auchter@ni.com>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/extcon-provider.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> @@ -13,6 +14,24 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/regmap.h>
> +#include <linux/usb/typec.h>
> +
> +#define TUSB320_REG8 0x8
> +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
> +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
> +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
> +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
> +#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
> +#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
> +#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
> +#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
> +#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
> +#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2)
> +#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
> +#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
> +#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5
> +#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6
> +#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
>
> #define TUSB320_REG9 0x9
> #define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
> @@ -55,6 +74,10 @@ struct tusb320_priv {
> struct extcon_dev *edev;
> struct tusb320_ops *ops;
> enum tusb320_attached_state state;
> + struct typec_port *port;
> + struct typec_capability cap;
> + enum typec_port_type port_type;
> + enum typec_pwr_opmode pwr_opmode;
> };
>
> static const char * const tusb_attached_states[] = {
> @@ -184,6 +207,44 @@ static struct tusb320_ops tusb320l_ops = {
> .get_revision = tusb320l_get_revision,
> };
>
> +static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
> +{
> + u8 mode;
> +
> + if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
> + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
> + else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
> + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
> + else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
> + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
> + else /* No other mode is supported. */
> + return -EINVAL;
> +
> + return regmap_write_bits(priv->regmap, TUSB320_REG8,
> + TUSB320_REG8_CURRENT_MODE_ADVERTISE,
> + FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
> + mode));
> +}
> +
> +static int tusb320_port_type_set(struct typec_port *port,
> + enum typec_port_type type)
> +{
> + struct tusb320_priv *priv = typec_get_drvdata(port);
> +
> + if (type == TYPEC_PORT_SRC)
> + return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
> + else if (type == TYPEC_PORT_SNK)
> + return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
> + else if (type == TYPEC_PORT_DRP)
> + return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
> + else
> + return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
> +}
> +
> +static const struct typec_operations tusb320_typec_ops = {
> + .port_type_set = tusb320_port_type_set,
> +};
> +
> static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
> {
> int state, polarity;
> @@ -211,6 +272,47 @@ static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
> priv->state = state;
> }
>
> +static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
> +{
> + struct typec_port *port = priv->port;
> + struct device *dev = priv->dev;
> + u8 mode, role, state;
> + int ret, reg8;
> + bool ori;
> +
> + ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
> + typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
> + TYPEC_ORIENTATION_NORMAL);
> +
> + state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
> + TUSB320_REG9_ATTACHED_STATE_MASK;
> + if (state == TUSB320_ATTACHED_STATE_DFP)
> + role = TYPEC_SOURCE;
> + else
> + role = TYPEC_SINK;
> +
> + typec_set_vconn_role(port, role);
> + typec_set_pwr_role(port, role);
> + typec_set_data_role(port, role == TYPEC_SOURCE ?
> + TYPEC_HOST : TYPEC_DEVICE);
> +
> + ret = regmap_read(priv->regmap, TUSB320_REG8, ®8);
> + if (ret) {
> + dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
> + return;
> + }
> +
> + mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
> + if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
> + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
> + else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
> + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
> + else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
> + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
> + else /* Charge through accessory */
> + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
> +}
> +
> static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> {
> struct tusb320_priv *priv = dev_id;
> @@ -225,6 +327,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
> return IRQ_NONE;
>
> tusb320_extcon_irq_handler(priv, reg);
> + tusb320_typec_irq_handler(priv, reg);
>
> regmap_write(priv->regmap, TUSB320_REG9, reg);
>
> @@ -260,6 +363,58 @@ static int tusb320_extcon_probe(struct tusb320_priv *priv)
> return 0;
> }
>
> +static int tusb320_typec_probe(struct i2c_client *client,
> + struct tusb320_priv *priv)
> +{
> + struct fwnode_handle *connector;
> + const char *cap_str;
> + int ret;
> +
> + /* The Type-C connector is optional, for backward compatibility. */
> + connector = device_get_named_child_node(&client->dev, "connector");
> + if (!connector)
> + return 0;
> +
> + /* Type-C connector found. */
> + ret = typec_get_fw_cap(&priv->cap, connector);
> + if (ret)
> + return ret;
> +
> + priv->port_type = priv->cap.type;
> +
> + /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
> + ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
> + if (ret)
> + return ret;
> +
> + ret = typec_find_pwr_opmode(cap_str);
> + if (ret < 0)
> + return ret;
> + if (ret == TYPEC_PWR_MODE_PD)
> + return -EINVAL;
> +
> + priv->pwr_opmode = ret;
> +
> + /* Initialize the hardware with the devicetree settings. */
> + ret = tusb320_set_adv_pwr_mode(priv);
> + if (ret)
> + return ret;
> +
> + priv->cap.revision = USB_TYPEC_REV_1_1;
> + priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
> + priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
> + priv->cap.orientation_aware = true;
> + priv->cap.driver_data = priv;
> + priv->cap.ops = &tusb320_typec_ops;
> + priv->cap.fwnode = connector;
> +
> + priv->port = typec_register_port(&client->dev, &priv->cap);
> + if (IS_ERR(priv->port))
> + return PTR_ERR(priv->port);
> +
> + return 0;
> +}
> +
> static int tusb320_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -300,6 +455,10 @@ static int tusb320_probe(struct i2c_client *client,
> if (ret)
> return ret;
>
> + ret = tusb320_typec_probe(client, priv);
> + if (ret)
> + return ret;
> +
> /* update initial state */
> tusb320_irq_handler(client->irq, priv);
>
Applied it. Thanks.
--
Best Regards,
Samsung Electronics
Chanwoo Choi
next prev parent reply other threads:[~2022-08-23 22:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-30 18:04 [PATCH 1/2] extcon: usbc-tusb320: Factor out extcon into dedicated functions Marek Vasut
2022-07-30 18:05 ` [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support Marek Vasut
2022-07-30 20:39 ` kernel test robot
2022-07-30 20:49 ` kernel test robot
2022-08-02 7:40 ` Heikki Krogerus
2022-08-23 10:40 ` Marek Vasut
2022-08-23 9:49 ` Alvin Šipraga
2022-08-23 10:39 ` Marek Vasut
2022-08-23 12:57 ` Alvin Šipraga
2022-08-23 14:07 ` Marek Vasut
2022-08-23 22:36 ` Chanwoo Choi [this message]
2022-08-02 7:39 ` [PATCH 1/2] extcon: usbc-tusb320: Factor out extcon into dedicated functions Heikki Krogerus
2022-08-23 22:26 ` Chanwoo Choi
2022-11-13 16:59 [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support Peter Rosin
2022-11-13 18:48 ` Marek Vasut
2022-11-13 19:41 ` Peter Rosin
2022-11-13 20:47 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7eea5047-01eb-cdb0-654e-f05e210e2f08@gmail.com \
--to=cwchoi00@gmail.com \
--cc=cw00.choi@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=marex@denx.de \
--cc=y.oudjana@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).