messages from 2018-11-27 11:29:45 to 2018-12-05 06:17:25 UTC [more...]
USB: qcaux: Add Motorola modem UARTs
2018-12-05 6:17 UTC
[1/2,v4] USB: serial: mos7840: Adjust port settings for read and write registers
2018-12-05 6:03 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-05 1:57 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-05 0:56 UTC
[3/3] usb: appledisplay: Remove unnecessary spinlock
2018-12-04 22:43 UTC
[2/3] usb: appledisplay: Set urb transfer_flags to URB_NO_TRANSFER_DMA_MAP
2018-12-04 22:43 UTC
[1/3] usb: appledisplay: Add 27" Apple Cinema Display
2018-12-04 22:43 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-12-04 22:41 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-04 20:01 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 19:28 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 19:07 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-04 17:47 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 16:46 UTC
scsi_set_medium_removal timeout issue
2018-12-04 16:36 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:31 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 16:18 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:15 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:00 UTC
usb: core: Remove unnecessary memset()
2018-12-04 14:31 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-04 14:31 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-12-04 14:28 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 13:39 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-04 13:29 UTC
[v1,12/12] dts: hi3660: Add support for usb on Hikey960
2018-12-04 12:45 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-04 12:34 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 11:43 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-04 10:54 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 10:46 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-12-04 9:18 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 9:09 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:52 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 8:50 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:40 UTC
[v3,3/3] usb: chipidea: imx: allow to configure oc polarity on i.MX25
2018-12-04 8:31 UTC
[v3,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 8:31 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:31 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 8:20 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 7:11 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 6:19 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-04 1:40 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-04 1:22 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-04 1:07 UTC
[01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-04 1:03 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 23:08 UTC
usb: musb: dsps: fix otg state machine
2018-12-03 20:49 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-03 19:23 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-03 17:22 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-03 16:10 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 16:05 UTC
[01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 16:01 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 15:54 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 14:51 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 12:43 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-03 12:38 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 12:25 UTC
[v4] USB: Don't enable LPM if it's already enabled
2018-12-03 10:26 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 10:23 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-03 10:19 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 9:53 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 9:30 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 9:28 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-03 9:28 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 9:25 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-03 9:23 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 9:15 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 9:12 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 9:02 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:59 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:51 UTC
[v3] USB: Don't enable LPM if it's already enabled
2018-12-03 8:36 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:35 UTC
[v3] USB: Don't enable LPM if it's already enabled
2018-12-03 8:32 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 8:30 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 8:23 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 8:17 UTC
[v1,06/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2018-12-03 8:14 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 8:12 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 8:12 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 8:02 UTC
[v1,12/12] dts: hi3660: Add support for usb on Hikey960
2018-12-03 3:45 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 3:45 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-03 3:45 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 3:45 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-03 3:45 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 3:45 UTC
[v1,06/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2018-12-03 3:45 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 3:45 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 3:45 UTC
[v1,03/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2018-12-03 3:45 UTC
[v1,02/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2018-12-03 3:45 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 3:45 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 3:13 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-12-03 3:06 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-12-03 1:42 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-03 1:34 UTC
[PATCHv2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-12-02 23:51 UTC
[v2,3/3] usb: chipidea: imx: allow to configure oc polarity on i.MX25
2018-12-02 21:33 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-02 21:33 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-02 21:33 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-12-02 21:12 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-02 20:34 UTC
[RFC,v2,02/15] usb:cdns3: Device side header file
2018-12-02 19:27 UTC
[RFC,v2,12/15] usb:cdns3: Adds enumeration related function
2018-12-02 16:39 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-02 16:36 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 12:52 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 11:49 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-12-02 10:34 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-12-02 5:57 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-12-01 13:30 UTC
[v7,10/10] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
2018-12-01 11:13 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-01 11:13 UTC
[v7,08/10] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-12-01 11:13 UTC
[v7,07/10] usb: dwc3: check for requests in started list for stream capable endpoints
2018-12-01 11:13 UTC
[v7,06/10] usb: dwc3: don't issue no-op trb for stream capable endpoints
2018-12-01 11:13 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-01 11:13 UTC
[v7,04/10] usb: dwc3: update stream id in depcmd
2018-12-01 11:13 UTC
[v7,03/10] usb: dwc3: gadget: handle stream events
2018-12-01 11:13 UTC
[v7,02/10] usb: gadget: function: tcm: Add timeout for stream capable endpoints
2018-12-01 11:13 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-01 11:13 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-01 11:11 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 23:39 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-11-30 23:29 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:34 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:16 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 20:53 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-30 16:15 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-30 15:09 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 14:36 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-30 7:32 UTC
[RFC,v2,02/15] usb:cdns3: Device side header file
2018-11-30 6:48 UTC
[2/2,v4] USB: serial: mos7840: Add a product ID for the new product
2018-11-30 6:31 UTC
[1/2,v4] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-30 6:31 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 6:29 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 4:20 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-30 3:29 UTC
[v3,3/4] usb: chipidea: host: override ehci->hub_control
2018-11-30 2:43 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-11-30 2:33 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-29 15:51 UTC
[1/2] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-29 15:49 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-29 14:10 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-29 13:30 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-29 12:51 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-29 12:31 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-29 10:36 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 7:50 UTC
[2/2] USB: serial: mos7840: Add a product ID for the new product
2018-11-29 6:51 UTC
[1/2] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-29 6:51 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 6:26 UTC
[AUTOSEL,4.14,14/35] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-29 6:00 UTC
[AUTOSEL,4.19,23/68] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-29 5:55 UTC
[AUTOSEL,4.19,22/68] usb: dwc2: pci: Fix an error code in probe
2018-11-29 5:55 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 3:16 UTC
[5/5] usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
2018-11-29 2:34 UTC
[4/5] usb: mtu3: enable SETUPENDISR interrupt
2018-11-29 2:34 UTC
[3/5] usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
2018-11-29 2:34 UTC
[2/5] usb: mtu3: enable hardware remote wakeup from L1 automatically
2018-11-29 2:34 UTC
[1/5] usb: mtu3: remove QMU checksum
2018-11-29 2:34 UTC
usb: dwc3: debug: Print register name
2018-11-29 2:14 UTC
[V3] usb/mtu3: power down device ip at setup
2018-11-29 1:20 UTC
usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
2018-11-28 16:40 UTC
USB: Fix invalid-free bug in port_over_current_notify()
2018-11-28 16:25 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-28 16:15 UTC
[RFC,v2,12/15] usb:cdns3: Adds enumeration related function
2018-11-28 15:50 UTC
usb: hub: delay hub autosuspend if USB3 port is still link training
2018-11-28 15:01 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-11-28 14:54 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-11-28 14:31 UTC
usb: hub: delay hub autosuspend if USB3 port is still link training
2018-11-28 13:55 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-11-28 12:46 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-11-28 12:22 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-28 11:40 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-28 11:34 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:16 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:15 UTC
[V3] usb/mtu3: power down device ip at setup
2018-11-28 9:53 UTC
[V2] usb/mtu3: power down device ip at setup
2018-11-28 9:41 UTC
[V2] usb/mtu3: power down device ip at setup
2018-11-28 9:29 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-28 9:14 UTC
usb: dwc3: debug: Print register name
2018-11-28 7:16 UTC
usb/mtu3: power down device ip at setup
2018-11-28 7:02 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:59 UTC
usb: dwc3: debug: Print register name
2018-11-28 6:57 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:22 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:04 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-27 22:59 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 20:27 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-27 18:50 UTC
[v3,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-11-27 17:54 UTC
[v3,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-27 17:54 UTC
[v3,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-27 17:54 UTC
[RFC,2/2] dt-bindings: allow suggesting usb bus number for usb platform busses
2018-11-27 16:57 UTC
[RFC,1/2] usb core: dts: allow suggesting usb bus number for platform busses
2018-11-27 16:57 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 16:31 UTC
[PATCHv3] USB: serial: mos7840: Add a product ID for the new product
2018-11-27 15:26 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 15:19 UTC
[v3,2/4] usb: chipidea: imx: add HSIC support
2018-11-27 13:41 UTC
[v3,3/4] usb: chipidea: host: override ehci->hub_control
2018-11-27 13:41 UTC
[v3,1/4] usb: chipidea: add flag for imx hsic implementation
2018-11-27 13:40 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-27 12:10 UTC
[v3] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-27 11:48 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-27 11:29 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).