From: Alan Stern <stern@rowland.harvard.edu>
To: Allen Blaylock <AllenB@epiloglaser.com>
Cc: Manu Gautam <mgautam@codeaurora.org>,
Peter Chen <peter.chen@nxp.com>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: RE: EHSET with hub and PCIe root hub
Date: Thu, 12 Sep 2019 10:20:33 -0400 (EDT) [thread overview]
Message-ID: <Pine.LNX.4.44L0.1909121008160.1440-100000@iolanthe.rowland.org> (raw)
In-Reply-To: <BYAPR20MB2501098ADC3493845D7D2E9DCCB10@BYAPR20MB2501.namprd20.prod.outlook.com>
On Wed, 11 Sep 2019, Allen Blaylock wrote:
> So I do see the PORT_TEST SetFeature Request and Response when I use tcpdump to
> make a capture using usbmon. Unfortunately I am not as familiar with the raw
> usbmon output or some of the diagnostics output by usbmon so I may be missing
> something. Here is a capture from the sysfs usbmon file:
>
> a52efe00 268933702 C Ii:002:01 0 1 = 08
> a52efe00 268933736 S Ii:002:01 -115 1 <
> a546b700 268934005 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b700 268934303 C Ci:002:00 0 4 = 01010100
> a546b700 268934327 S Co:002:00 s 23 01 0010 0003 0000 0
> a546b700 268934384 C Co:002:00 0 0
> a546b700 268934438 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b700 268934520 C Ci:002:00 0 4 = 01010000
> a546b700 268980085 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b700 268980332 C Ci:002:00 0 4 = 01010000
> a546b700 269030091 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b700 269030333 C Ci:002:00 0 4 = 01010000
> a546b700 269080082 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b700 269080335 C Ci:002:00 0 4 = 01010000
> a546b280 269130094 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546b280 269130339 C Ci:002:00 0 4 = 01010000
> a546b280 269130376 S Co:002:00 s 23 03 0004 0003 0000 0
> a546b280 269130577 C Co:002:00 0 0
> a546be00 269160091 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546be00 269160344 C Ci:002:00 0 4 = 03051000
> a546be00 269160361 S Co:002:00 s 23 01 0014 0003 0000 0
> a546be00 269160416 C Co:002:00 0 0
> a546be00 269230118 S Ci:000:00 s 80 06 0100 0000 0040 64 <
> a546be00 269230341 C Ci:000:00 0 18 = 12010002 00000040 0a1a0401 00010102 0301
> a546be00 269230358 S Co:002:00 s 23 03 0004 0003 0000 0
> a546be00 269230425 C Co:002:00 0 0
> a546be00 269260104 S Ci:002:00 s a3 00 0000 0003 0004 4 <
> a546be00 269260354 C Ci:002:00 0 4 = 03051000
> a546be00 269260374 S Co:002:00 s 23 01 0014 0003 0000 0
> a546be00 269260430 C Co:002:00 0 0
> a546be00 269330097 S Co:000:00 s 00 05 0004 0000 0000 0
> a546be00 269330372 C Co:000:00 0 0
> a546b700 269380050 S Ci:004:00 s 80 06 0100 0000 0012 18 <
> a546b700 269380327 C Ci:004:00 0 18 = 12010002 00000040 0a1a0401 00010102 0301
> a546b700 269380360 S Ci:004:00 s 80 06 0200 0000 0009 9 <
> a546b700 269380453 C Ci:004:00 0 9 = 09022e00 01010080 32
> a546b700 269380468 S Ci:004:00 s 80 06 0200 0000 002e 46 <
> a546b700 269380574 C Ci:004:00 0 46 = 09022e00 01010080 32090400 0004ff00 00000705 02020002 00070504 02000200
> a546b700 269380608 S Ci:004:00 s 80 06 0300 0000 00ff 255 <
> a546b700 269380701 C Ci:004:00 0 4 = 04030904
> a546b700 269380717 S Ci:004:00 s 80 06 0302 0409 00ff 255 <
> a546b700 269380824 C Ci:004:00 0 34 = 22035500 53004200 20004500 48004f00 53005400 20005400 45005300 54004500
> a546b700 269380845 S Ci:004:00 s 80 06 0301 0409 00ff 255 <
> a546b700 269380949 C Ci:004:00 0 34 = 22035500 53004200 20004500 48004f00 53005400 20005400 45005300 54004500
> a546b700 269380968 S Ci:004:00 s 80 06 0303 0409 00ff 255 <
> a546b700 269381074 C Ci:004:00 0 10 = 0a034900 4f005600 3300
> a546b280 269381564 S Co:004:00 s 00 09 0001 0000 0000 0
> a546b280 269381704 C Co:004:00 0 0
> a560a000 269407637 S Co:002:00 s 23 03 0015 0403 0000 0
> a560a000 269407869 C Co:002:00 -32 0
>
> I was unable to make sense of it with the help of the usbmon.txt documentation
> and will need some more time using wireshark and the output of tcpdump to get
> familiar with decoding the raw usbmon output.
Most of the usbmon output shows that a device was attached to port 3 of
hub 2 and enumerated as usual over the course of about half a second.
The very last two lines show the computer sending the hub a
Set-Port-Test request on port 3 for test mode 4, which is Test Packet.
The hub's response is a STALL, indicating that the hub doesn't
understand or doesn't implement this request.
Alan Stern
next prev parent reply other threads:[~2019-09-12 14:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 22:01 EHSET with hub and PCIe root hub Allen Blaylock
2019-09-11 2:57 ` Peter Chen
2019-09-11 3:54 ` Manu Gautam
2019-09-11 20:34 ` Allen Blaylock
2019-09-12 0:49 ` Peter Chen
2019-09-12 14:20 ` Alan Stern [this message]
2019-09-12 14:28 ` Alan Stern
2019-09-12 20:32 ` Allen Blaylock
2019-09-12 20:51 ` Alan Stern
2019-09-16 1:11 ` Peter Chen
2019-09-12 14:29 ` Allen Blaylock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.44L0.1909121008160.1440-100000@iolanthe.rowland.org \
--to=stern@rowland.harvard.edu \
--cc=AllenB@epiloglaser.com \
--cc=linux-usb@vger.kernel.org \
--cc=mgautam@codeaurora.org \
--cc=peter.chen@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).