linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support
@ 2021-06-06 12:16 Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 1/7] ARM: dts: bcm283x: Fix up MMC node names Stefan Wahren
                   ` (6 more replies)
  0 siblings, 7 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

This series adds support for the Raspberry Pi 400.

Changes in V2:
- add collected Reviewed-by and Acked-by
- add memory node, ethernet alias and gpio expander to bcm2711-rpi.dtsi
- drop PCIe USB reset control from bcm2711-rpi.dtsi
- add patch to fixup LED node names
- include RPi 4 B dts into RPi 400 dts

Stefan Wahren (7):
  ARM: dts: bcm283x: Fix up MMC node names
  watchdog: bcm2835_wdt: consider system-power-controller property
  ARM: dts: Move BCM2711 RPi specific into separate dtsi
  dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
  ARM: dts: bcm283x: Fix up GPIO LED node names
  ARM: dts: Add Raspberry Pi 400 support
  arm64: dts: broadcom: Add reference to RPi 400

 .../devicetree/bindings/arm/bcm/bcm2835.yaml       |  1 +
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts              | 85 +++-------------------
 arch/arm/boot/dts/bcm2711-rpi-400.dts              | 45 ++++++++++++
 arch/arm/boot/dts/bcm2711-rpi.dtsi                 | 74 +++++++++++++++++++
 arch/arm/boot/dts/bcm2711.dtsi                     |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts           |  4 +-
 arch/arm/boot/dts/bcm2835-rpi-a.dts                |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |  4 +-
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts           |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts                |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi             |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           |  2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts             |  2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts              |  4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts         |  4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts         |  4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts              |  2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi             |  2 +-
 arch/arm/boot/dts/bcm283x.dtsi                     |  2 +-
 arch/arm64/boot/dts/broadcom/Makefile              |  3 +-
 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts   |  2 +
 drivers/watchdog/bcm2835_wdt.c                     | 10 ++-
 24 files changed, 165 insertions(+), 98 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-400.dts
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts

-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 1/7] ARM: dts: bcm283x: Fix up MMC node names
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property Stefan Wahren
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec..d872064 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -413,7 +413,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b83a864..0f3be55 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -420,7 +420,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 1/7] ARM: dts: bcm283x: Fix up MMC node names Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-15 21:17   ` Stefan Wahren
  2021-06-22  7:12   ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 3/7] ARM: dts: Move BCM2711 RPi specific into separate dtsi Stefan Wahren
                   ` (4 subsequent siblings)
  6 siblings, 2 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

Until now all Raspberry Pi boards used the power off function of the SoC.
But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
possibly cannot register the poweroff handler because the it's
already registered by this watchdog driver. So consider the
system-power-controller property for registering, which is already
defined in soc/bcm/brcm,bcm2835-pm.txt .

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index dec6ca0..9490717 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	if (pm_power_off == NULL) {
-		pm_power_off = bcm2835_power_off;
-		bcm2835_power_off_wdt = wdt;
+	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
+		if (!pm_power_off) {
+			pm_power_off = bcm2835_power_off;
+			bcm2835_power_off_wdt = wdt;
+		} else {
+			dev_info(dev, "Poweroff handler already present!\n");
+		}
 	}
 
 	dev_info(dev, "Broadcom BCM2835 watchdog timer");
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 3/7] ARM: dts: Move BCM2711 RPi specific into separate dtsi
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 1/7] ARM: dts: bcm283x: Fix up MMC node names Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 4/7] dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema Stefan Wahren
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

There is a lot of Raspberry Pi specific stuff (neither SoC or board
specific) for the BCM2711 which is currently in the RPi 4 B dts. In order
to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it
into a separate dtsi.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 81 +++++------------------------------
 arch/arm/boot/dts/bcm2711-rpi.dtsi    | 74 ++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+), 71 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3b4ab94..c54854a1 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -1,11 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2711-rpi.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
-
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
 	model = "Raspberry Pi 4 Model B";
@@ -15,19 +13,6 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0>;
-	};
-
-	aliases {
-		emmc2bus = &emmc2bus;
-		ethernet0 = &genet;
-		pcie0 = &pcie0;
-		blconfig = &blconfig;
-	};
-
 	leds {
 		act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -79,31 +64,15 @@
 	status = "okay";
 };
 
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "PWR_LED_OFF",
-				  "GLOBAL_RESET",
-				  "VDD_SD_IO_SEL",
-				  "CAM_GPIO",
-				  "SD_PWR_ON",
-				  "";
-		status = "okay";
-	};
-
-	reset: reset {
-		compatible = "raspberrypi,firmware-reset";
-		#reset-cells = <1>;
-	};
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "";
 };
 
 &gpio {
@@ -180,23 +149,13 @@
 };
 
 &hdmi0 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
 &hdmi1 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
-&hvs {
-	clocks = <&firmware_clocks 4>;
-};
-
 &pixelvalve0 {
 	status = "okay";
 };
@@ -219,22 +178,6 @@
 	status = "okay";
 };
 
-&rmem {
-	/*
-	 * RPi4's co-processor will copy the board's bootloader configuration
-	 * into memory for the OS to consume. It'll also update this node with
-	 * its placement information.
-	 */
-	blconfig: nvram@0 {
-		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x0 0x0>;
-		no-map;
-		status = "disabled";
-	};
-};
-
 /* SDHCI is used to control the SDIO for wireless */
 &sdhci {
 	#address-cells = <1>;
@@ -309,10 +252,6 @@
 	status = "okay";
 };
 
-&vchiq {
-	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
 &vc4 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
new file mode 100644
index 0000000..ca266c5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+};
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 4/7] dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
                   ` (2 preceding siblings ...)
  2021-06-06 12:16 ` [PATCH V2 3/7] ARM: dts: Move BCM2711 RPi specific into separate dtsi Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 5/7] ARM: dts: bcm283x: Fix up GPIO LED node names Stefan Wahren
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

Add new Raspberry Pi 400 to DT schema.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 812ae8c..230b80d 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -18,6 +18,7 @@ properties:
       - description: BCM2711 based Boards
         items:
           - enum:
+              - raspberrypi,400
               - raspberrypi,4-model-b
           - const: brcm,bcm2711
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 5/7] ARM: dts: bcm283x: Fix up GPIO LED node names
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
                   ` (3 preceding siblings ...)
  2021-06-06 12:16 ` [PATCH V2 4/7] dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 6/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 7/7] arm64: dts: broadcom: Add reference to RPi 400 Stefan Wahren
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

Fix the node names for the GPIO LEDs to conform to the standard node
name led-..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 2 +-
 15 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index c54854a1..f24bdd0 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39..40b9405 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48..11edb58 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c2..1b435c6 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c..a23c25c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957..1b63d6b 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2..e4e6b6ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c..33b2b77 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6..6f9b3a9 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b..87ddcad 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a68..d8af8ee 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be033..77099a7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 3734314..6101026 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa..dd4a486 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37..828a205 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 6/7] ARM: dts: Add Raspberry Pi 400 support
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
                   ` (4 preceding siblings ...)
  2021-06-06 12:16 ` [PATCH V2 5/7] ARM: dts: bcm283x: Fix up GPIO LED node names Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  2021-06-06 12:16 ` [PATCH V2 7/7] arm64: dts: broadcom: Add reference to RPi 400 Stefan Wahren
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:

- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/Makefile            |  1 +
 arch/arm/boot/dts/bcm2711-rpi-400.dts | 45 +++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-400.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f8f09c5..ec00dba 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
 	bcm2837-rpi-cm3-io3.dtb \
+	bcm2711-rpi-400.dtb \
 	bcm2711-rpi-4-b.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
new file mode 100644
index 0000000..f4d2fc2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		/delete-node/ led-act;
+
+		led-pwr {
+			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "SD_OC_N";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+};
+
+&pm {
+	/delete-property/ system-power-controller;
+};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 7/7] arm64: dts: broadcom: Add reference to RPi 400
  2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
                   ` (5 preceding siblings ...)
  2021-06-06 12:16 ` [PATCH V2 6/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
@ 2021-06-06 12:16 ` Stefan Wahren
  6 siblings, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-06 12:16 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog, Stefan Wahren

This adds a reference to the dts of the Raspberry Pi 400,
so we don't need to maintain the content in arm64.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
---
 arch/arm64/boot/dts/broadcom/Makefile            | 3 ++-
 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 998e240..11eae3e 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
+			      bcm2711-rpi-4-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 0000000..b9000f5
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2711-rpi-400.dts"
-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property
  2021-06-06 12:16 ` [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property Stefan Wahren
@ 2021-06-15 21:17   ` Stefan Wahren
  2021-06-22  7:12   ` Stefan Wahren
  1 sibling, 0 replies; 11+ messages in thread
From: Stefan Wahren @ 2021-06-15 21:17 UTC (permalink / raw)
  To: Rob Herring, Nicolas Saenz Julienne
  Cc: Florian Fainelli, Ray Jui, Scott Branden,
	bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson, soc,
	Wim Van Sebroeck, Guenter Roeck, devicetree, linux-rpi-kernel,
	linux-arm-kernel, linux-watchdog

Hi Guenther,

Am 06.06.21 um 14:16 schrieb Stefan Wahren:
> Until now all Raspberry Pi boards used the power off function of the SoC.
> But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
> possibly cannot register the poweroff handler because the it's
> already registered by this watchdog driver. So consider the
> system-power-controller property for registering, which is already
> defined in soc/bcm/brcm,bcm2835-pm.txt .
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
all the other patches from this series has been applied. Can this go via
the watchdog-next tree?

Best regards
Stefan



^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property
  2021-06-06 12:16 ` [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property Stefan Wahren
  2021-06-15 21:17   ` Stefan Wahren
@ 2021-06-22  7:12   ` Stefan Wahren
  2021-06-28 16:31     ` Guenter Roeck
  1 sibling, 1 reply; 11+ messages in thread
From: Stefan Wahren @ 2021-06-22  7:12 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: Rob Herring, Nicolas Saenz Julienne, Florian Fainelli, Ray Jui,
	Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
	Olof Johansson, soc, Wim Van Sebroeck, devicetree,
	linux-arm-kernel, linux-watchdog

Hi Guenter,

Am 06.06.21 um 14:16 schrieb Stefan Wahren:
> Until now all Raspberry Pi boards used the power off function of the SoC.
> But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
> possibly cannot register the poweroff handler because the it's
> already registered by this watchdog driver. So consider the
> system-power-controller property for registering, which is already
> defined in soc/bcm/brcm,bcm2835-pm.txt .
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
> index dec6ca0..9490717 100644
> --- a/drivers/watchdog/bcm2835_wdt.c
> +++ b/drivers/watchdog/bcm2835_wdt.c
> @@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
>  	if (err)
>  		return err;
>  
> -	if (pm_power_off == NULL) {
> -		pm_power_off = bcm2835_power_off;
> -		bcm2835_power_off_wdt = wdt;
> +	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
> +		if (!pm_power_off) {
> +			pm_power_off = bcm2835_power_off;
> +			bcm2835_power_off_wdt = wdt;
> +		} else {
> +			dev_info(dev, "Poweroff handler already present!\n");
> +		}
>  	}
>  
>  	dev_info(dev, "Broadcom BCM2835 watchdog timer");

this isn't not applied yet. Can this go via the watchdog-next tree into
5.14?

Best regards
Stefan


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property
  2021-06-22  7:12   ` Stefan Wahren
@ 2021-06-28 16:31     ` Guenter Roeck
  0 siblings, 0 replies; 11+ messages in thread
From: Guenter Roeck @ 2021-06-28 16:31 UTC (permalink / raw)
  To: Stefan Wahren
  Cc: Rob Herring, Nicolas Saenz Julienne, Florian Fainelli, Ray Jui,
	Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
	Olof Johansson, soc, Wim Van Sebroeck, devicetree,
	linux-arm-kernel, linux-watchdog

On Tue, Jun 22, 2021 at 09:12:30AM +0200, Stefan Wahren wrote:
> Hi Guenter,
> 
> Am 06.06.21 um 14:16 schrieb Stefan Wahren:
> > Until now all Raspberry Pi boards used the power off function of the SoC.
> > But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
> > possibly cannot register the poweroff handler because the it's
> > already registered by this watchdog driver. So consider the
> > system-power-controller property for registering, which is already
> > defined in soc/bcm/brcm,bcm2835-pm.txt .
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> > Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
> > Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> >  drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
> > index dec6ca0..9490717 100644
> > --- a/drivers/watchdog/bcm2835_wdt.c
> > +++ b/drivers/watchdog/bcm2835_wdt.c
> > @@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
> >  	if (err)
> >  		return err;
> >  
> > -	if (pm_power_off == NULL) {
> > -		pm_power_off = bcm2835_power_off;
> > -		bcm2835_power_off_wdt = wdt;
> > +	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
> > +		if (!pm_power_off) {
> > +			pm_power_off = bcm2835_power_off;
> > +			bcm2835_power_off_wdt = wdt;
> > +		} else {
> > +			dev_info(dev, "Poweroff handler already present!\n");
> > +		}
> >  	}
> >  
> >  	dev_info(dev, "Broadcom BCM2835 watchdog timer");
> 
> this isn't not applied yet. Can this go via the watchdog-next tree into
> 5.14?
> 
I applied it to my watchdog-next branch; it will be up to Wim to send
it upstream. Note that the patch does not how up in linux-watchdog
patchwork (no idea why, though), which is why it got lost.

Guenter

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-06-28 16:31 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-06 12:16 [PATCH V2 0/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 1/7] ARM: dts: bcm283x: Fix up MMC node names Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property Stefan Wahren
2021-06-15 21:17   ` Stefan Wahren
2021-06-22  7:12   ` Stefan Wahren
2021-06-28 16:31     ` Guenter Roeck
2021-06-06 12:16 ` [PATCH V2 3/7] ARM: dts: Move BCM2711 RPi specific into separate dtsi Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 4/7] dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 5/7] ARM: dts: bcm283x: Fix up GPIO LED node names Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 6/7] ARM: dts: Add Raspberry Pi 400 support Stefan Wahren
2021-06-06 12:16 ` [PATCH V2 7/7] arm64: dts: broadcom: Add reference to RPi 400 Stefan Wahren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).