* [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too
@ 2019-04-14 11:09 Wolfram Sang
2019-04-14 14:52 ` Guenter Roeck
2019-04-16 10:21 ` Steve Twiss
0 siblings, 2 replies; 3+ messages in thread
From: Wolfram Sang @ 2019-04-14 11:09 UTC (permalink / raw)
To: linux-watchdog; +Cc: linux-renesas-soc, Support Opensource, Wolfram Sang
And make sure the final obtained value gets properly scaled. Remove two
empty lines to group the initialization blocks while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Tested with a Renesas Lager board (R-Car H2, DA9063AD), checking the initial
timeout value via sysfs. I didn't test handover from bootloader because my
bootloader neither supports WDT or I2C out of the box.
drivers/watchdog/da9063_wdt.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
index 06eb9070203c..3d65e92a4e3f 100644
--- a/drivers/watchdog/da9063_wdt.c
+++ b/drivers/watchdog/da9063_wdt.c
@@ -208,18 +208,20 @@ static int da9063_wdt_probe(struct platform_device *pdev)
wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT;
wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT;
wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS;
- wdd->timeout = DA9063_WDG_TIMEOUT;
wdd->parent = dev;
-
wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
watchdog_set_restart_priority(wdd, 128);
-
watchdog_set_drvdata(wdd, da9063);
+ /* Set default timeout, maybe override it with DT value, scale it */
+ wdd->timeout = DA9063_WDG_TIMEOUT;
+ watchdog_init_timeout(wdd, 0, dev);
+ da9063_wdt_set_timeout(wdd, wdd->timeout);
+
/* Change the timeout to the default value if the watchdog is running */
if (da9063_wdt_is_running(da9063)) {
- da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT);
+ da9063_wdt_update_timeout(da9063, wdd->timeout);
set_bit(WDOG_HW_RUNNING, &wdd->status);
}
--
2.11.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too
2019-04-14 11:09 [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too Wolfram Sang
@ 2019-04-14 14:52 ` Guenter Roeck
2019-04-16 10:21 ` Steve Twiss
1 sibling, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2019-04-14 14:52 UTC (permalink / raw)
To: Wolfram Sang, linux-watchdog; +Cc: linux-renesas-soc, Support Opensource
On 4/14/19 4:09 AM, Wolfram Sang wrote:
> And make sure the final obtained value gets properly scaled. Remove two
> empty lines to group the initialization blocks while we are here.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Tested with a Renesas Lager board (R-Car H2, DA9063AD), checking the initial
> timeout value via sysfs. I didn't test handover from bootloader because my
> bootloader neither supports WDT or I2C out of the box.
>
> drivers/watchdog/da9063_wdt.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> index 06eb9070203c..3d65e92a4e3f 100644
> --- a/drivers/watchdog/da9063_wdt.c
> +++ b/drivers/watchdog/da9063_wdt.c
> @@ -208,18 +208,20 @@ static int da9063_wdt_probe(struct platform_device *pdev)
> wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT;
> wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT;
> wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS;
> - wdd->timeout = DA9063_WDG_TIMEOUT;
> wdd->parent = dev;
> -
> wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
>
> watchdog_set_restart_priority(wdd, 128);
> -
> watchdog_set_drvdata(wdd, da9063);
>
> + /* Set default timeout, maybe override it with DT value, scale it */
> + wdd->timeout = DA9063_WDG_TIMEOUT;
> + watchdog_init_timeout(wdd, 0, dev);
> + da9063_wdt_set_timeout(wdd, wdd->timeout);
> +
> /* Change the timeout to the default value if the watchdog is running */
> if (da9063_wdt_is_running(da9063)) {
> - da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT);
> + da9063_wdt_update_timeout(da9063, wdd->timeout);
> set_bit(WDOG_HW_RUNNING, &wdd->status);
> }
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too
2019-04-14 11:09 [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too Wolfram Sang
2019-04-14 14:52 ` Guenter Roeck
@ 2019-04-16 10:21 ` Steve Twiss
1 sibling, 0 replies; 3+ messages in thread
From: Steve Twiss @ 2019-04-16 10:21 UTC (permalink / raw)
To: Wolfram Sang, linux-watchdog; +Cc: linux-renesas-soc, Support Opensource, LKML
On 14 April 2019 12:10, Wolfram Sang wrote:
> Subject: [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too
>
> And make sure the final obtained value gets properly scaled. Remove two
> empty lines to group the initialization blocks while we are here.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>
> Tested with a Renesas Lager board (R-Car H2, DA9063AD), checking the initial
> timeout value via sysfs. I didn't test handover from bootloader because my
> bootloader neither supports WDT or I2C out of the box.
Tested on git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
* watchdog-next 6829e6ef3f22 [origin/watchdog-next] watchdog: pnx4008: readout watchdog state
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Regards,
Steve
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-04-16 10:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-14 11:09 [PATCH RFT] watchdog: da9063_wdt: parse DT for timeout value, too Wolfram Sang
2019-04-14 14:52 ` Guenter Roeck
2019-04-16 10:21 ` Steve Twiss
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).