Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] Revision of pc87413_wdt driver to use watchdog subsystem
@ 2019-07-30  3:50 Mark Balantzyan
  2019-07-30  4:26 ` Guenter Roeck
  0 siblings, 1 reply; 2+ messages in thread
From: Mark Balantzyan @ 2019-07-30  3:50 UTC (permalink / raw)
  To: linux; +Cc: wim, linux-kernel, linux-watchdog, andrianov, Mark Balantzyan

This patch rewrites the pc87413_wdt driver to use the watchdog subsystem. In
doing so, it also addresses a potential race condition owing from the
swc_base_addr variable being used before being set.

Signed-off-by: Mark Balantzyan <mbalant3@gmail.com>

---
 drivers/watchdog/Kconfig       |   1 +
 drivers/watchdog/pc87413_wdt.c | 294 +++++----------------------------
 2 files changed, 39 insertions(+), 256 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9af07fd9..84a7326d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1166,6 +1166,7 @@ config SCx200_WDT
 
 config PC87413_WDT
 	tristate "NS PC87413 watchdog"
+	select WATCHDOG_CORE
 	depends on X86
 	---help---
 	  This is the driver for the hardware watchdog on the PC87413 chipset
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 06a892e3..d1d32771 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -22,12 +22,10 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/notifier.h>
-#include <linux/fs.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
@@ -65,7 +63,6 @@ static char expect_close;		/* is the close expected? */
 
 static DEFINE_SPINLOCK(io_lock);	/* to guard us from io races */
 
-static bool nowayout = WATCHDOG_NOWAYOUT;
 
 /* -- Low level function ----------------------------------------*/
 
@@ -216,41 +213,32 @@ static inline void pc87413_disable_sw_wd_trg(void)
 
 /* -- Higher level functions ------------------------------------*/
 
-/* Enable the watchdog */
+/* Enable/start the watchdog */
 
-static void pc87413_enable(void)
+static void pc87413_start(void)
 {
-	spin_lock(&io_lock);
-
 	pc87413_swc_bank3();
 	pc87413_programm_wdto(timeout);
 	pc87413_enable_wden();
 	pc87413_enable_sw_wd_tren();
 	pc87413_enable_sw_wd_trg();
 
-	spin_unlock(&io_lock);
 }
 
-/* Disable the watchdog */
+/* Disable/stop the watchdog */
 
-static void pc87413_disable(void)
+static void pc87413_stop(void)
 {
-	spin_lock(&io_lock);
-
 	pc87413_swc_bank3();
 	pc87413_disable_sw_wd_tren();
 	pc87413_disable_sw_wd_trg();
 	pc87413_programm_wdto(0);
-
-	spin_unlock(&io_lock);
 }
 
-/* Refresh the watchdog */
+/* Refresh/keepalive the watchdog */
 
-static void pc87413_refresh(void)
+static void pc87413_keepalive(struct watchdog_device *wdd)
 {
-	spin_lock(&io_lock);
-
 	pc87413_swc_bank3();
 	pc87413_disable_sw_wd_tren();
 	pc87413_disable_sw_wd_trg();
@@ -258,195 +246,11 @@ static void pc87413_refresh(void)
 	pc87413_enable_wden();
 	pc87413_enable_sw_wd_tren();
 	pc87413_enable_sw_wd_trg();
-
-	spin_unlock(&io_lock);
-}
-
-/* -- File operations -------------------------------------------*/
-
-/**
- *	pc87413_open:
- *	@inode: inode of device
- *	@file: file handle to device
- *
- */
-
-static int pc87413_open(struct inode *inode, struct file *file)
-{
-	/* /dev/watchdog can only be opened once */
-
-	if (test_and_set_bit(0, &timer_enabled))
-		return -EBUSY;
-
-	if (nowayout)
-		__module_get(THIS_MODULE);
-
-	/* Reload and activate timer */
-	pc87413_refresh();
-
-	pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
-
-	return nonseekable_open(inode, file);
-}
-
-/**
- *	pc87413_release:
- *	@inode: inode to board
- *	@file: file handle to board
- *
- *	The watchdog has a configurable API. There is a religious dispute
- *	between people who want their watchdog to be able to shut down and
- *	those who want to be sure if the watchdog manager dies the machine
- *	reboots. In the former case we disable the counters, in the latter
- *	case you have to open it again very soon.
- */
-
-static int pc87413_release(struct inode *inode, struct file *file)
-{
-	/* Shut off the timer. */
-
-	if (expect_close == 42) {
-		pc87413_disable();
-		pr_info("Watchdog disabled, sleeping again...\n");
-	} else {
-		pr_crit("Unexpected close, not stopping watchdog!\n");
-		pc87413_refresh();
-	}
-	clear_bit(0, &timer_enabled);
-	expect_close = 0;
 	return 0;
 }
 
-/**
- *	pc87413_status:
- *
- *      return, if the watchdog is enabled (timeout is set...)
- */
-
-
-static int pc87413_status(void)
-{
-	  return 0; /* currently not supported */
-}
-
-/**
- *	pc87413_write:
- *	@file: file handle to the watchdog
- *	@data: data buffer to write
- *	@len: length in bytes
- *	@ppos: pointer to the position to write. No seeks allowed
- *
- *	A write to a watchdog device is defined as a keepalive signal. Any
- *	write of data will do, as we we don't define content meaning.
- */
-
-static ssize_t pc87413_write(struct file *file, const char __user *data,
-			     size_t len, loff_t *ppos)
-{
-	/* See if we got the magic character 'V' and reload the timer */
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			/* reset expect flag */
-			expect_close = 0;
-
-			/* scan to see whether or not we got the
-			   magic character */
-			for (i = 0; i != len; i++) {
-				char c;
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = 42;
-			}
-		}
-
-		/* someone wrote to us, we should reload the timer */
-		pc87413_refresh();
-	}
-	return len;
-}
-
-/**
- *	pc87413_ioctl:
- *	@file: file handle to the device
- *	@cmd: watchdog command
- *	@arg: argument pointer
- *
- *	The watchdog API defines a common set of functions for all watchdogs
- *	according to their available features. We only actually usefully support
- *	querying capabilities and current status.
- */
-
-static long pc87413_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg)
-{
-	int new_timeout;
-
-	union {
-		struct watchdog_info __user *ident;
-		int __user *i;
-	} uarg;
-
-	static const struct watchdog_info ident = {
-		.options          = WDIOF_KEEPALIVEPING |
-				    WDIOF_SETTIMEOUT |
-				    WDIOF_MAGICCLOSE,
-		.firmware_version = 1,
-		.identity         = "PC87413(HF/F) watchdog",
-	};
-
-	uarg.i = (int __user *)arg;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(uarg.ident, &ident,
-					sizeof(ident)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-		return put_user(pc87413_status(), uarg.i);
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, uarg.i);
-	case WDIOC_SETOPTIONS:
-	{
-		int options, retval = -EINVAL;
-		if (get_user(options, uarg.i))
-			return -EFAULT;
-		if (options & WDIOS_DISABLECARD) {
-			pc87413_disable();
-			retval = 0;
-		}
-		if (options & WDIOS_ENABLECARD) {
-			pc87413_enable();
-			retval = 0;
-		}
-		return retval;
-	}
-	case WDIOC_KEEPALIVE:
-		pc87413_refresh();
-#ifdef DEBUG
-		pr_info(DPFX "keepalive\n");
-#endif
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, uarg.i))
-			return -EFAULT;
-		/* the API states this is given in secs */
-		new_timeout /= 60;
-		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
-			return -EINVAL;
-		timeout = new_timeout;
-		pc87413_refresh();
-		/* fall through and return the new timeout... */
-	case WDIOC_GETTIMEOUT:
-		new_timeout = timeout * 60;
-		return put_user(new_timeout, uarg.i);
-	default:
-		return -ENOTTY;
-	}
-}
 
-/* -- Notifier funtions -----------------------------------------*/
+/* -- Notifier functions -----------------------------------------*/
 
 /**
  *	notify_sys:
@@ -460,37 +264,43 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
  *	trust me - if it happens it does suck.
  */
 
-static int pc87413_notify_sys(struct notifier_block *this,
-			      unsigned long code,
-			      void *unused)
+
+/* -- Module's structures ---------------------------------------*/
+
+
+static int watchdog_restart_notifier(struct notifier_block *nb,
+				    unsigned long code, void *data)
 {
-	if (code == SYS_DOWN || code == SYS_HALT)
-		/* Turn the card off */
-		pc87413_disable();
+	struct watchdog_device *wdd = container_of(nb, struct watchdog_device,
+						   reboot_nb);
+
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		int ret;
+
+		ret = wdd->ops->stop(wdd);
+		if (ret)
+			return NOTIFY_BAD;
+	}
+
 	return NOTIFY_DONE;
 }
 
-/* -- Module's structures ---------------------------------------*/
 
-static const struct file_operations pc87413_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= pc87413_write,
-	.unlocked_ioctl	= pc87413_ioctl,
-	.open		= pc87413_open,
-	.release	= pc87413_release,
-};
 
-static struct notifier_block pc87413_notifier = {
-	.notifier_call  = pc87413_notify_sys,
+static struct watchdog_ops pc87413wdt_ops = {
+       	.owner = THIS_MODULE,
+       	.start = pc87413_start,
+       	.stop = pc87413_stop,
+       	.ping = pc87413_keepalive,
+	.restart = watchdog_restart_notifier,
 };
 
-static struct miscdevice pc87413_miscdev = {
-	.minor          = WATCHDOG_MINOR,
-	.name           = "watchdog",
-	.fops           = &pc87413_fops,
+static struct watchdog_device pc87413wdt_wdd = {
+       	.ops = &pc87413wdt_ops,
+	.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
 };
 
+
 /* -- Module init functions -------------------------------------*/
 
 /**
@@ -498,7 +308,6 @@ static struct miscdevice pc87413_miscdev = {
  *
  *	Set up the WDT watchdog board. All we have to do is grab the
  *	resources we require and bitch if anyone beat us to them.
- *	The open() function will actually kick the board off.
  */
 
 static int __init pc87413_init(void)
@@ -511,16 +320,7 @@ static int __init pc87413_init(void)
 	if (!request_muxed_region(io, 2, MODNAME))
 		return -EBUSY;
 
-	ret = register_reboot_notifier(&pc87413_notifier);
-	if (ret != 0)
-		pr_err("cannot register reboot notifier (err=%d)\n", ret);
-
-	ret = misc_register(&pc87413_miscdev);
-	if (ret != 0) {
-		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
-		goto reboot_unreg;
-	}
+	ret = watchdog_register_device(&pc87413wdt_wdd);
 	pr_info("initialized. timeout=%d min\n", timeout);
 
 	pc87413_select_wdt_out();
@@ -533,17 +333,12 @@ static int __init pc87413_init(void)
 		goto misc_unreg;
 	}
 
-	pc87413_enable();
-
 	release_region(io, 2);
+	pc87413_keepalive(&pc87413wdt_wdd);
 	return 0;
 
 misc_unreg:
-	misc_deregister(&pc87413_miscdev);
-reboot_unreg:
-	unregister_reboot_notifier(&pc87413_notifier);
-	release_region(io, 2);
-	return ret;
+	watchdog_unregister_device(&pc87413wdt_wdd);
 }
 
 /**
@@ -558,14 +353,7 @@ reboot_unreg:
 
 static void __exit pc87413_exit(void)
 {
-	/* Stop the timer before we leave */
-	if (!nowayout) {
-		pc87413_disable();
-		pr_info("Watchdog disabled\n");
-	}
-
-	misc_deregister(&pc87413_miscdev);
-	unregister_reboot_notifier(&pc87413_notifier);
+	watchdog_unregister_device(&pc87413wdt_wdd);
 	release_region(swc_base_addr, 0x20);
 
 	pr_info("watchdog component driver removed\n");
@@ -587,9 +375,3 @@ module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout,
 		"Watchdog timeout in minutes (default="
 				__MODULE_STRING(DEFAULT_TIMEOUT) ").");
-
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout,
-		"Watchdog cannot be stopped once started (default="
-				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] Revision of pc87413_wdt driver to use watchdog subsystem
  2019-07-30  3:50 [PATCH] Revision of pc87413_wdt driver to use watchdog subsystem Mark Balantzyan
@ 2019-07-30  4:26 ` Guenter Roeck
  0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2019-07-30  4:26 UTC (permalink / raw)
  To: Mark Balantzyan; +Cc: wim, linux-kernel, linux-watchdog, andrianov

On 7/29/19 8:50 PM, Mark Balantzyan wrote:
> This patch rewrites the pc87413_wdt driver to use the watchdog subsystem. In
> doing so, it also addresses a potential race condition owing from the
> swc_base_addr variable being used before being set.
> 
> Signed-off-by: Mark Balantzyan <mbalant3@gmail.com>
> 

"Revision of ..." is an odd subject line. Also, please start the subject line with
"watchdog: pc87413: ".

> ---
>   drivers/watchdog/Kconfig       |   1 +
>   drivers/watchdog/pc87413_wdt.c | 294 +++++----------------------------
>   2 files changed, 39 insertions(+), 256 deletions(-)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 9af07fd9..84a7326d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1166,6 +1166,7 @@ config SCx200_WDT
>   
>   config PC87413_WDT
>   	tristate "NS PC87413 watchdog"
> +	select WATCHDOG_CORE
>   	depends on X86
>   	---help---
>   	  This is the driver for the hardware watchdog on the PC87413 chipset
> diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
> index 06a892e3..d1d32771 100644
> --- a/drivers/watchdog/pc87413_wdt.c
> +++ b/drivers/watchdog/pc87413_wdt.c
> @@ -22,12 +22,10 @@
>   
>   #include <linux/module.h>
>   #include <linux/types.h>
> -#include <linux/miscdevice.h>
>   #include <linux/watchdog.h>
>   #include <linux/ioport.h>
>   #include <linux/delay.h>

Is this used anywhere ?

>   #include <linux/notifier.h>
> -#include <linux/fs.h>
>   #include <linux/reboot.h>

notifier.h and reboot.h should not be needed if the code is changed
to use watchdog_stop_on_reboot().

>   #include <linux/init.h>
>   #include <linux/spinlock.h>

No longer needed.

> @@ -65,7 +63,6 @@ static char expect_close;		/* is the close expected? */
>   
>   static DEFINE_SPINLOCK(io_lock);	/* to guard us from io races */
>   
No longer needed.

> -static bool nowayout = WATCHDOG_NOWAYOUT;
>   
>   /* -- Low level function ----------------------------------------*/
>   
> @@ -216,41 +213,32 @@ static inline void pc87413_disable_sw_wd_trg(void)
>   
>   /* -- Higher level functions ------------------------------------*/
>   
> -/* Enable the watchdog */
> +/* Enable/start the watchdog */
>   
> -static void pc87413_enable(void)
> +static void pc87413_start(void)

I am quite sure you still see a warning here, or rather where the function is referenced.

>   {
> -	spin_lock(&io_lock);
> -
>   	pc87413_swc_bank3();
>   	pc87413_programm_wdto(timeout);
>   	pc87413_enable_wden();
>   	pc87413_enable_sw_wd_tren();
>   	pc87413_enable_sw_wd_trg();
>   
> -	spin_unlock(&io_lock);
>   }
>   
> -/* Disable the watchdog */
> +/* Disable/stop the watchdog */
>   
> -static void pc87413_disable(void)
> +static void pc87413_stop(void)

Same here.

>   {
> -	spin_lock(&io_lock);
> -
>   	pc87413_swc_bank3();
>   	pc87413_disable_sw_wd_tren();
>   	pc87413_disable_sw_wd_trg();
>   	pc87413_programm_wdto(0);
> -
> -	spin_unlock(&io_lock);
>   }
>   
> -/* Refresh the watchdog */
> +/* Refresh/keepalive the watchdog */
>   
> -static void pc87413_refresh(void)
> +static void pc87413_keepalive(struct watchdog_device *wdd)
>   {
> -	spin_lock(&io_lock);
> -
>   	pc87413_swc_bank3();
>   	pc87413_disable_sw_wd_tren();
>   	pc87413_disable_sw_wd_trg();
> @@ -258,195 +246,11 @@ static void pc87413_refresh(void)
>   	pc87413_enable_wden();
>   	pc87413_enable_sw_wd_tren();
>   	pc87413_enable_sw_wd_trg();
> -
> -	spin_unlock(&io_lock);
> -}
> -
> -/* -- File operations -------------------------------------------*/
> -
> -/**
> - *	pc87413_open:
> - *	@inode: inode of device
> - *	@file: file handle to device
> - *
> - */
> -
> -static int pc87413_open(struct inode *inode, struct file *file)
> -{
> -	/* /dev/watchdog can only be opened once */
> -
> -	if (test_and_set_bit(0, &timer_enabled))
> -		return -EBUSY;
> -
> -	if (nowayout)
> -		__module_get(THIS_MODULE);
> -
> -	/* Reload and activate timer */
> -	pc87413_refresh();
> -
> -	pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
> -
> -	return nonseekable_open(inode, file);
> -}
> -
> -/**
> - *	pc87413_release:
> - *	@inode: inode to board
> - *	@file: file handle to board
> - *
> - *	The watchdog has a configurable API. There is a religious dispute
> - *	between people who want their watchdog to be able to shut down and
> - *	those who want to be sure if the watchdog manager dies the machine
> - *	reboots. In the former case we disable the counters, in the latter
> - *	case you have to open it again very soon.
> - */
> -
> -static int pc87413_release(struct inode *inode, struct file *file)
> -{
> -	/* Shut off the timer. */
> -
> -	if (expect_close == 42) {
> -		pc87413_disable();
> -		pr_info("Watchdog disabled, sleeping again...\n");
> -	} else {
> -		pr_crit("Unexpected close, not stopping watchdog!\n");
> -		pc87413_refresh();
> -	}
> -	clear_bit(0, &timer_enabled);
> -	expect_close = 0;
>   	return 0;
>   }
>   
> -/**
> - *	pc87413_status:
> - *
> - *      return, if the watchdog is enabled (timeout is set...)
> - */
> -
> -
> -static int pc87413_status(void)
> -{
> -	  return 0; /* currently not supported */
> -}
> -
> -/**
> - *	pc87413_write:
> - *	@file: file handle to the watchdog
> - *	@data: data buffer to write
> - *	@len: length in bytes
> - *	@ppos: pointer to the position to write. No seeks allowed
> - *
> - *	A write to a watchdog device is defined as a keepalive signal. Any
> - *	write of data will do, as we we don't define content meaning.
> - */
> -
> -static ssize_t pc87413_write(struct file *file, const char __user *data,
> -			     size_t len, loff_t *ppos)
> -{
> -	/* See if we got the magic character 'V' and reload the timer */
> -	if (len) {
> -		if (!nowayout) {
> -			size_t i;
> -
> -			/* reset expect flag */
> -			expect_close = 0;
> -
> -			/* scan to see whether or not we got the
> -			   magic character */
> -			for (i = 0; i != len; i++) {
> -				char c;
> -				if (get_user(c, data + i))
> -					return -EFAULT;
> -				if (c == 'V')
> -					expect_close = 42;
> -			}
> -		}
> -
> -		/* someone wrote to us, we should reload the timer */
> -		pc87413_refresh();
> -	}
> -	return len;
> -}
> -
> -/**
> - *	pc87413_ioctl:
> - *	@file: file handle to the device
> - *	@cmd: watchdog command
> - *	@arg: argument pointer
> - *
> - *	The watchdog API defines a common set of functions for all watchdogs
> - *	according to their available features. We only actually usefully support
> - *	querying capabilities and current status.
> - */
> -
> -static long pc87413_ioctl(struct file *file, unsigned int cmd,
> -						unsigned long arg)
> -{
> -	int new_timeout;
> -
> -	union {
> -		struct watchdog_info __user *ident;
> -		int __user *i;
> -	} uarg;
> -
> -	static const struct watchdog_info ident = {
> -		.options          = WDIOF_KEEPALIVEPING |
> -				    WDIOF_SETTIMEOUT |
> -				    WDIOF_MAGICCLOSE,
> -		.firmware_version = 1,
> -		.identity         = "PC87413(HF/F) watchdog",
> -	};
> -
> -	uarg.i = (int __user *)arg;
> -
> -	switch (cmd) {
> -	case WDIOC_GETSUPPORT:
> -		return copy_to_user(uarg.ident, &ident,
> -					sizeof(ident)) ? -EFAULT : 0;
> -	case WDIOC_GETSTATUS:
> -		return put_user(pc87413_status(), uarg.i);
> -	case WDIOC_GETBOOTSTATUS:
> -		return put_user(0, uarg.i);
> -	case WDIOC_SETOPTIONS:
> -	{
> -		int options, retval = -EINVAL;
> -		if (get_user(options, uarg.i))
> -			return -EFAULT;
> -		if (options & WDIOS_DISABLECARD) {
> -			pc87413_disable();
> -			retval = 0;
> -		}
> -		if (options & WDIOS_ENABLECARD) {
> -			pc87413_enable();
> -			retval = 0;
> -		}
> -		return retval;
> -	}
> -	case WDIOC_KEEPALIVE:
> -		pc87413_refresh();
> -#ifdef DEBUG
> -		pr_info(DPFX "keepalive\n");
> -#endif
> -		return 0;
> -	case WDIOC_SETTIMEOUT:
> -		if (get_user(new_timeout, uarg.i))
> -			return -EFAULT;
> -		/* the API states this is given in secs */
> -		new_timeout /= 60;
> -		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
> -			return -EINVAL;
> -		timeout = new_timeout;
> -		pc87413_refresh();
> -		/* fall through and return the new timeout... */
> -	case WDIOC_GETTIMEOUT:
> -		new_timeout = timeout * 60;
> -		return put_user(new_timeout, uarg.i);
> -	default:
> -		return -ENOTTY;
> -	}
> -}
>   
> -/* -- Notifier funtions -----------------------------------------*/
> +/* -- Notifier functions -----------------------------------------*/
>   
>   /**
>    *	notify_sys:
> @@ -460,37 +264,43 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
>    *	trust me - if it happens it does suck.
>    */
>   
> -static int pc87413_notify_sys(struct notifier_block *this,
> -			      unsigned long code,
> -			      void *unused)
> +
> +/* -- Module's structures ---------------------------------------*/
> +
> +
> +static int watchdog_restart_notifier(struct notifier_block *nb,
> +				    unsigned long code, void *data)
>   {
> -	if (code == SYS_DOWN || code == SYS_HALT)
> -		/* Turn the card off */
> -		pc87413_disable();
> +	struct watchdog_device *wdd = container_of(nb, struct watchdog_device,
> +						   reboot_nb);
> +
> +	if (code == SYS_DOWN || code == SYS_HALT) {
> +		int ret;
> +
> +		ret = wdd->ops->stop(wdd);
> +		if (ret)
> +			return NOTIFY_BAD;
> +	}
> +
>   	return NOTIFY_DONE;
>   }
>   

As mentioned, please drop the notifier function and call watchdog_stop_on_reboot()
prior to registering the watchdog.

> -/* -- Module's structures ---------------------------------------*/
>   
> -static const struct file_operations pc87413_fops = {
> -	.owner		= THIS_MODULE,
> -	.llseek		= no_llseek,
> -	.write		= pc87413_write,
> -	.unlocked_ioctl	= pc87413_ioctl,
> -	.open		= pc87413_open,
> -	.release	= pc87413_release,
> -};
>   
> -static struct notifier_block pc87413_notifier = {
> -	.notifier_call  = pc87413_notify_sys,
> +static struct watchdog_ops pc87413wdt_ops = {
> +       	.owner = THIS_MODULE,
> +       	.start = pc87413_start,
> +       	.stop = pc87413_stop,
> +       	.ping = pc87413_keepalive,

I don't immediately see how timeouts are now handled, and I am not sure
if they are handled correctly, especially with the removed
		/* the API states this is given in secs */
		new_timeout /= 60;
above, and the datasheet says that timeouts are in multiples of minutes.
This means that a set_)timeout function will be needed to calculate and
set the correct timeout values.

> +	.restart = watchdog_restart_notifier,

Bad alignment

>   };
>   
> -static struct miscdevice pc87413_miscdev = {
> -	.minor          = WATCHDOG_MINOR,
> -	.name           = "watchdog",
> -	.fops           = &pc87413_fops,
> +static struct watchdog_device pc87413wdt_wdd = {
> +       	.ops = &pc87413wdt_ops,
> +	.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
>   };
>   
> +
>   /* -- Module init functions -------------------------------------*/
>   
>   /**
> @@ -498,7 +308,6 @@ static struct miscdevice pc87413_miscdev = {
>    *
>    *	Set up the WDT watchdog board. All we have to do is grab the
>    *	resources we require and bitch if anyone beat us to them.
> - *	The open() function will actually kick the board off.
>    */
>   
>   static int __init pc87413_init(void)
> @@ -511,16 +320,7 @@ static int __init pc87413_init(void)
>   	if (!request_muxed_region(io, 2, MODNAME))
>   		return -EBUSY;
>   
> -	ret = register_reboot_notifier(&pc87413_notifier);
> -	if (ret != 0)
> -		pr_err("cannot register reboot notifier (err=%d)\n", ret);
> -
> -	ret = misc_register(&pc87413_miscdev);
> -	if (ret != 0) {
> -		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
> -		       WATCHDOG_MINOR, ret);
> -		goto reboot_unreg;
> -	}
> +	ret = watchdog_register_device(&pc87413wdt_wdd);
>   	pr_info("initialized. timeout=%d min\n", timeout);
>   
>   	pc87413_select_wdt_out();
> @@ -533,17 +333,12 @@ static int __init pc87413_init(void)
>   		goto misc_unreg;
>   	}
>   
> -	pc87413_enable();
> -
>   	release_region(io, 2);
> +	pc87413_keepalive(&pc87413wdt_wdd);

Not needed: The watchdog is not (or should not be) running.

>   	return 0;
>   
>   misc_unreg:

Wrong label name.

> -	misc_deregister(&pc87413_miscdev);
> -reboot_unreg:
> -	unregister_reboot_notifier(&pc87413_notifier);
> -	release_region(io, 2);
> -	return ret;
> +	watchdog_unregister_device(&pc87413wdt_wdd);

I am getting a bit lost here, but it seems to me this is called if
watchdog registration failed. The cleanup is wrong. You still need
to call release_region(), you don't need to unregister the watchdog,
and you still need to return ret.

>   }
>   
>   /**
> @@ -558,14 +353,7 @@ reboot_unreg:
>   
>   static void __exit pc87413_exit(void)
>   {
> -	/* Stop the timer before we leave */
> -	if (!nowayout) {
> -		pc87413_disable();
> -		pr_info("Watchdog disabled\n");
> -	}
> -
> -	misc_deregister(&pc87413_miscdev);
> -	unregister_reboot_notifier(&pc87413_notifier);
> +	watchdog_unregister_device(&pc87413wdt_wdd);
>   	release_region(swc_base_addr, 0x20);
>   
>   	pr_info("watchdog component driver removed\n");
> @@ -587,9 +375,3 @@ module_param(timeout, int, 0);
>   MODULE_PARM_DESC(timeout,
>   		"Watchdog timeout in minutes (default="
>   				__MODULE_STRING(DEFAULT_TIMEOUT) ").");
> -
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> -		"Watchdog cannot be stopped once started (default="
> -				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -
Again, why drop this module parameter ?

> 


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-30  3:50 [PATCH] Revision of pc87413_wdt driver to use watchdog subsystem Mark Balantzyan
2019-07-30  4:26 ` Guenter Roeck

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org linux-watchdog@archiver.kernel.org
	public-inbox-index linux-watchdog


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/ public-inbox