From: Ohad Ben-Cohen <ohad@wizery.com>
To: <linux-wireless@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Cc: Ido Yariv <ido@wizery.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
<linux-arm-kernel@lists.infradead.org>,
Chikkature Rajashekar Madhusudhan <madhu.cr@ti.com>,
Luciano Coelho <luciano.coelho@nokia.com>,
<akpm@linux-foundation.org>, San Mehat <san@google.com>,
Roger Quadros <roger.quadros@nokia.com>,
Tony Lindgren <tony@atomide.com>,
Nicolas Pitre <nico@fluxnic.net>,
Pandita Vikram <vikram.pandita@ti.com>,
Kalle Valo <kalle.valo@iki.fi>, Ohad Ben-Cohen <ohad@wizery.com>
Subject: [PATCH v4 1/8] wireless: wl1271: make wl12xx.h common to both spi and sdio
Date: Wed, 11 Aug 2010 21:21:46 +0300 [thread overview]
Message-ID: <1281550913-17633-2-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1281550913-17633-1-git-send-email-ohad@wizery.com>
Move wl12xx.h outside of the spi-specific location,
so it can be shared with both spi and sdio solutions.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
drivers/net/wireless/wl12xx/wl1251_sdio.c | 2 +-
drivers/net/wireless/wl12xx/wl1251_spi.c | 2 +-
drivers/net/wireless/wl12xx/wl1271_spi.c | 2 +-
include/linux/spi/wl12xx.h | 34 -----------------------------
include/linux/wl12xx.h | 34 +++++++++++++++++++++++++++++
5 files changed, 37 insertions(+), 37 deletions(-)
delete mode 100644 include/linux/spi/wl12xx.h
create mode 100644 include/linux/wl12xx.h
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index b901b61..a319df1 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -24,7 +24,7 @@
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/platform_device.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include <linux/irq.h>
#include "wl1251.h"
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index 27fdfaa..a6faf3e 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -26,7 +26,7 @@
#include <linux/slab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include "wl1251.h"
#include "wl1251_reg.h"
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 4cb99c5..c3fdab7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
#include <linux/slab.h>
#include "wl1271.h"
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
deleted file mode 100644
index a223ecb..0000000
--- a/include/linux/spi/wl12xx.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef _LINUX_SPI_WL12XX_H
-#define _LINUX_SPI_WL12XX_H
-
-struct wl12xx_platform_data {
- void (*set_power)(bool enable);
- /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
- int irq;
- bool use_eeprom;
-};
-
-#endif
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
new file mode 100644
index 0000000..137ac89
--- /dev/null
+++ b/include/linux/wl12xx.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_WL12XX_H
+#define _LINUX_WL12XX_H
+
+struct wl12xx_platform_data {
+ void (*set_power)(bool enable);
+ /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+ int irq;
+ bool use_eeprom;
+};
+
+#endif
--
1.7.0.4
next prev parent reply other threads:[~2010-08-11 18:22 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-11 18:21 [PATCH v4 0/8] native support for wl1271 on ZOOM Ohad Ben-Cohen
2010-08-11 18:21 ` Ohad Ben-Cohen [this message]
2010-08-11 18:21 ` [PATCH v4 2/8] wireless: wl1271: support return value for the set power func Ohad Ben-Cohen
2010-08-11 18:35 ` DebBarma, Tarun Kanti
2010-08-11 22:19 ` Ohad Ben-Cohen
2010-08-11 18:21 ` [PATCH v4 3/8] wireless: wl1271: add platform driver to get board data Ohad Ben-Cohen
2010-08-11 18:42 ` DebBarma, Tarun Kanti
2010-08-11 18:47 ` Felipe Balbi
2010-08-11 18:52 ` DebBarma, Tarun Kanti
2010-08-11 18:57 ` Felipe Balbi
2010-08-11 19:27 ` DebBarma, Tarun Kanti
2010-08-11 21:25 ` Russell King - ARM Linux
2010-08-11 22:15 ` Ohad Ben-Cohen
2010-08-12 6:40 ` Ohad Ben-Cohen
2010-08-12 9:55 ` Russell King - ARM Linux
2010-08-13 0:01 ` Ohad Ben-Cohen
2010-08-16 4:21 ` DebBarma, Tarun Kanti
2010-08-12 5:21 ` Felipe Balbi
2010-08-11 21:21 ` Russell King - ARM Linux
2010-08-11 20:10 ` Ohad Ben-Cohen
2010-08-11 21:34 ` Vitaly Wool
2010-08-11 22:18 ` Ohad Ben-Cohen
2010-08-12 5:27 ` Felipe Balbi
2010-08-11 18:21 ` [PATCH v4 4/8] wireless: wl1271: take irq info from private " Ohad Ben-Cohen
2010-08-11 18:21 ` [PATCH v4 5/8] wireless: wl1271: make ref_clock configurable by board Ohad Ben-Cohen
2010-08-11 18:21 ` [PATCH v4 6/8] omap: hsmmc: remove unused variable Ohad Ben-Cohen
2010-08-11 18:21 ` [PATCH v4 7/8] omap: zoom: add fixed regulator device for wlan Ohad Ben-Cohen
2010-08-11 18:21 ` [PATCH v4 8/8] omap: zoom: add mmc3/wl1271 device support Ohad Ben-Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281550913-17633-2-git-send-email-ohad@wizery.com \
--to=ohad@wizery.com \
--cc=akpm@linux-foundation.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ido@wizery.com \
--cc=kalle.valo@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@nokia.com \
--cc=madhu.cr@ti.com \
--cc=nico@fluxnic.net \
--cc=roger.quadros@nokia.com \
--cc=san@google.com \
--cc=tony@atomide.com \
--cc=vikram.pandita@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).