linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: johannes@sipsolutions.net, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH 2/3] mac80211: Add support to notify ftm responder configuration to the driver
Date: Tue, 14 Aug 2018 17:30:17 -0700	[thread overview]
Message-ID: <1534293018-4930-3-git-send-email-pradeepc@codeaurora.org> (raw)
In-Reply-To: <1534293018-4930-1-git-send-email-pradeepc@codeaurora.org>

New bss param ftm_responder is used to notify the driver to
enable or disable fine timing request (FTM) responder role in AP mode.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 include/net/mac80211.h | 4 ++++
 net/mac80211/cfg.c     | 4 ++++
 net/mac80211/util.c    | 3 +++
 3 files changed, 11 insertions(+)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5790f55c241d..6593c611655b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -308,6 +308,8 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
  * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
+ * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ *	functionality changed for this BSS (AP mode).
  *
  */
 enum ieee80211_bss_change {
@@ -337,6 +339,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_MU_GROUPS		= 1<<23,
 	BSS_CHANGED_KEEP_ALIVE		= 1<<24,
 	BSS_CHANGED_MCAST_RATE		= 1<<25,
+	BSS_CHANGED_FTM_RESPONDER	= 1<<26,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -611,6 +614,7 @@ struct ieee80211_bss_conf {
 	bool allow_p2p_go_ps;
 	u16 max_idle_period;
 	bool protected_keep_alive;
+	int ftm_responder;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d25da0e66da1..75e314b826fb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -964,6 +964,10 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |=
 					IEEE80211_P2P_OPPPS_ENABLE_BIT;
 
+	sdata->vif.bss_conf.ftm_responder = params->ftm_responder;
+	if (params->ftm_responder >= 0)
+		changed |= BSS_CHANGED_FTM_RESPONDER;
+
 	err = ieee80211_assign_beacon(sdata, &params->beacon, NULL);
 	if (err < 0) {
 		ieee80211_vif_release_channel(sdata);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 88efda7c9f8a..835fcf01fabc 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2076,6 +2076,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		case NL80211_IFTYPE_AP:
 			changed |= BSS_CHANGED_SSID | BSS_CHANGED_P2P_PS;
 
+			if (sdata->vif.bss_conf.ftm_responder >= 0)
+				changed |= BSS_CHANGED_FTM_RESPONDER;
+
 			if (sdata->vif.type == NL80211_IFTYPE_AP) {
 				changed |= BSS_CHANGED_AP_PROBE_RESP;
 
-- 
1.9.1

  parent reply	other threads:[~2018-08-15  3:26 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-15  0:30 [PATCH 0/3] Add support for ftm responder configuration Pradeep Kumar Chitrapu
2018-08-15  0:30 ` [PATCH 1/3] nl80211: add support to configure FTM responder functionality Pradeep Kumar Chitrapu
2018-08-15 12:09   ` Johannes Berg
2018-08-16  1:48     ` pradeepc
2018-08-16  8:09       ` Johannes Berg
2018-08-31  1:10   ` [PATCH 1/3] cfg80211: support FTM responder configuration/statistics Pradeep Kumar Chitrapu
2018-08-15  0:30 ` Pradeep Kumar Chitrapu [this message]
2018-08-15 12:09   ` [PATCH 2/3] mac80211: Add support to notify ftm responder configuration to the driver Johannes Berg
2018-08-31  1:11   ` [PATCH 2/3] mac80211: support FTM responder configuration/statistics Pradeep Kumar Chitrapu
2018-08-15  0:30 ` [PATCH 3/3] ath10k: Add support to configure ftm responder role Pradeep Kumar Chitrapu
2018-08-15 10:03   ` Sebastian Gottschall
2018-08-15 10:16   ` Sebastian Gottschall
2018-10-01 13:32     ` Kalle Valo
2018-11-16 12:17       ` Kalle Valo
2018-08-31  1:11   ` Pradeep Kumar Chitrapu
2018-08-15  9:04 ` [PATCH 0/3] Add support for ftm responder configuration Johannes Berg
2018-08-16  1:50   ` pradeepc
2018-08-16  8:12     ` Johannes Berg
2018-08-18  7:50       ` Pradeep Kumar Chitrapu
2018-08-20  9:33         ` Johannes Berg
2018-08-21 18:32           ` Pradeep Kumar Chitrapu
2018-08-21 19:24             ` Johannes Berg
2018-08-16  9:21     ` Kalle Valo
2018-08-31  1:10 ` [PATCH 0/3] support ftm responder configuration/statistics Pradeep Kumar Chitrapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1534293018-4930-3-git-send-email-pradeepc@codeaurora.org \
    --to=pradeepc@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).