linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v9 00/24] wfx: get out from the staging area
@ 2022-01-11 17:14 Jerome Pouiller
  2022-01-11 17:14 ` [PATCH v9 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip Jerome Pouiller
                   ` (23 more replies)
  0 siblings, 24 replies; 53+ messages in thread
From: Jerome Pouiller @ 2022-01-11 17:14 UTC (permalink / raw)
  To: linux-wireless, netdev, Kalle Valo
  Cc: devel, linux-kernel, Greg Kroah-Hartman, David S . Miller,
	devicetree, Rob Herring, linux-mmc, Pali Rohár, Ulf Hansson,
	Jérôme Pouiller

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Hello,

I think the wfx driver is now mature enough to be accepted in the
drivers/net/wireless directory.

The firmware is now a part of the linux-firmware repository since relase
20210315[1]. The PDS files (= antenna configurations) are still missing. I
will send them as soon as Kalle will have validated the new format.

[1]: https://lore.kernel.org/linux-firmware/2833354.gXvVfaC4I7@pc-42/


As requested by Kalle[2], I send one file per patch. At the end, all the
patches (or at least the patches 3 to 24) will be squashed (therefore, I
didn't bother to write real commit messages).

[2]: https://lore.kernel.org/lkml/87ft6p2n0h.fsf@codeaurora.org/

Here is a diagram of the global architecture that may help to understand
the code:

    ,------------------------------------.
    |                mac80211            |
    `------------------------------------'
    ,------------+-----------+-----------.
    |    sta     |           |           |
    |    scan    |           |           |
    |    main    |           |           |
    +------------+  data_tx  |           |
    |    key     |           |  data_rx  |
    | hif_tx_mib |   queue   |           |
    |   hif_tx   |           |           |
    |   hif_rx   |           |           |
    |  hif_api_* |           |           |
    +------------+-----------+-----------+--------.
    |                  bh                |  fwio  |
    +------------------------------------+--------+
    |                     hwio                    |
    +---------------------------------------------+
    |                   bus_sdio                  |
    |                   bus_spi                   |
    `---------------------------------------------'
    ,---------------------------------------------.
    |                  spi / sdio                 |
    `---------------------------------------------'

Roughly, I have sent the files from the bottom to the top.


Rob, I have still a warning with "make DT_CHECKER_FLAGS=-m
dt_binding_check":

    .../Documentation/devicetree/bindings/net/wireless/silabs,wfx.example.dt.yaml: wifi@1: compatible: 'anyOf' conditional failed, one must be fixed:
        ['silabs,brd8022a', 'silabs,wf200'] is too long
        Additional items are not allowed ('silabs,wf200' was unexpected)
        'silabs,wf200' was expected
        'silabs,brd4001a' was expected
        'silabs,brd8023a' was expected
        From schema: .../Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml

My understanding of "anyOf" is that multiple values should be accepted
(else, I would use "oneOf").


v9:
  - Rebase on mmc tree (ulfh/next, 356f3f2c5756). Indeed, I rely on the
    series named "mmc: core: extend mmc_fixup_device and transplant
    ti,wl1251 quirks from to be retired omap_hsmmc" by "H.  Nikolaus
    Schaller". This work is only included in the mmc tree. Anyway, I think
    the merge of mmc tree into Linus's tree is going to happen soon.
  - Locate the SDIO quirks into mmc/core/quirks.h. (Ulf, Pali)
  - Change the PDS format. It is now based on TLV. The tool to generate
    these files is ready, but I have not yet published it. (Kalle)
  - Fix the firmware location. It didn't match with linux-firmware. I take
    this opportunity to relocate these file into wfx/ instead of silabs/. I
    am going to send a PR to linux-firmware to reflect this changes when
    this PR will be accepted. (Kalle)
  - In the v8, some parts were formatted in 80 columns and somes in 100
    columns. Unify the coding style by applying 100 columns rule
    everywhere. Also change structs alignement in some places.
  - Improve output of "make DT_CHECKER_FLAGS=-m dt_binding_check" (but not
    yet perfect, see above) (Rob)

v8:
  - Change the way the DT is handled. The user can now specify the name of
    the board (= chip + antenna) he use. It easier for board designers to
    add new entries. I plan to send a PR to linux-firmware to include PDS
    files of the developpement boards belong the firmware (I also plan to
    relocate these file into wfx/ instead of silabs/). (Kalle, Pali)
  - Prefix visible functions and structs with "wfx_". I mostly kept the
    code under 80 columns. (Kalle, Pali, Greg)
  - Remove support for force_ps_timeout for now. (Kalle)
  - Fix licenses of Makefile, Kconfig and hif_api*.h. (Kalle)
  - Do not mix and match endianess in struct hif_ind_startup. (Kalle)
  - Remove magic values. (Kalle)
  - Use IS_ALIGNED(). (BTW, PTR_IS_ALIGNED() does not exist?) (Kalle)
  - I have also noticed that some headers files did not declare all the
    struct they used.

v7:
  - Update location of mmc-pwrseq-simple.txt (Rob)

v6:
  - Rebase on last staging-next (roughtly somewhere after the 5.15
    merge window). So, this series include the patches from:
      https://lore.kernel.org/netdev/20210913130203.1903622-1-Jerome.Pouiller@silabs.com/

v5:
  - Add reference to the PR to linux-firmware in the cover letter
  - Rebase on last staging tree (that mainly include commit 6efed0a69794
    "staging: wfx: fix possible panic with re-queued frames" and a few
    cosmetics changes)
  - Remove useless trailing spaces in DT binding (Rob)
  - Add a commit message in the patch 2 since I am not sure it will be
    squashed with the other (Rob)

v4:
  - Rebase on last staging tree
  - Add 'additionalProperties: false' to the DT specification (I made that
    change blindly because I am able to reproduce Rob's error) (Rob)
  - Replace C++ comments with Ansi C comments (Kalle)
  - Check that existing Ansi C comments comply with net/ "compact" style
  - Drop one obsolete comment
  - Remove comments after '#endif' in header files
  - Remove macro redefinitions in hif_api_general.h (Kalle)
  - Replace compiletime_assert() with BUILD_BUG_ON_MSG() (Kalle)
  - Rename ieee80211_is_action_back() (Kalle)
  - Add a comment explaining how the PDS is sent to the device (Kalle)
  - Add a comment about case where CONFIG_MMC==m in the Makefile (Kalle)
  - Fix irrevelant comment about CONFIG_VMAP_STACK (Kalle)
  - Talk about the unreliable SDIO Vendor ID in the Kconfig help (Kalle)
  - Mention the firmware status in the cover letter (Kalle)
  - Fix misaligned function arguments in key.c

v3:
  - dt-bindings: Rename config-file property (Rob)
  - dt-bindings: No additional properties are allowed (spi-max-frequency is
    already listed) (Rob)
  - dt-bindings: Remove references for mac-address properties (Rob)
  - Rebase on staging/staging-next

v2:
  - dt-bindings: Improve device description and add link to the datasheet
      (Rob)
  - dt-bindings: Add blank lines between each DT property (Rob)
  - dt-bindings: Explicitly mention mac-address and local-mac-address and
      add references to ethernet-controller.yaml (Rob)
  - dt-bindings: "config-file" is not for development/debug (Rob)
  - dt-bindings: Remove description of "spi-max-frequency" (Rob)
  - dt-bindings: Use "folded scalar" syntax instead of escaping the colons
  - bus_sdio.c: A compatible node in the DT is now mandatory to probe the
      device. Also change documentation of dt-bindings accordingly (Pali,
      Ulf)
  - bus_sdio.c: Move SDIO IDs to sdio_ids.h (Pali)
  - bh.c: Import patch "staging: wfx: fix test on return value of
      gpiod_get_value()" (Nathan)
  - data_tx.c: Import patch "staging: wfx: fix use of uninitialized
      pointer"
  - sta.c: Import patch "staging: wfx: make a const array static, makes
      object smaller" (Colin)

v1:
  - Drop the function name in the warning message (Kalle)
  - Replace goto by return in wfx_send_pdata_pds() (Kalle, Dan)
  - Improve error label in wfx_send_pdata_pds() (Kalle)


Jérôme Pouiller (24):
  mmc: sdio: add SDIO IDs for Silabs WF200 chip
  dt-bindings: introduce silabs,wfx.yaml
  wfx: add Makefile/Kconfig
  wfx: add wfx.h
  wfx: add main.c/main.h
  wfx: add bus.h
  wfx: add bus_spi.c
  wfx: add bus_sdio.c
  wfx: add hwio.c/hwio.h
  wfx: add fwio.c/fwio.h
  wfx: add bh.c/bh.h
  wfx: add hif_api_*.h
  wfx: add hif_tx*.c/hif_tx*.h
  wfx: add key.c/key.h
  wfx: add hif_rx.c/hif_rx.h
  wfx: add data_rx.c/data_rx.h
  wfx: add queue.c/queue.h
  wfx: add data_tx.c/data_tx.h
  wfx: add sta.c/sta.h
  wfx: add scan.c/scan.h
  wfx: add debug.c/debug.h
  wfx: add traces.h
  wfx: remove from the staging area
  wfx: get out from the staging area

 .../bindings/net/wireless/silabs,wfx.yaml     |  67 ++--
 MAINTAINERS                                   |   3 +-
 drivers/mmc/core/quirks.h                     |   5 +
 drivers/net/wireless/Kconfig                  |   1 +
 drivers/net/wireless/Makefile                 |   1 +
 drivers/net/wireless/silabs/Kconfig           |  18 +
 drivers/net/wireless/silabs/Makefile          |   3 +
 .../wireless/silabs}/wfx/Kconfig              |   5 +
 .../wireless/silabs}/wfx/Makefile             |   3 +-
 .../{staging => net/wireless/silabs}/wfx/bh.c |  67 ++--
 .../{staging => net/wireless/silabs}/wfx/bh.h |   1 +
 .../wireless/silabs}/wfx/bus.h                |   8 +-
 .../wireless/silabs}/wfx/bus_sdio.c           | 103 ++---
 .../wireless/silabs}/wfx/bus_spi.c            | 104 ++++--
 .../wireless/silabs}/wfx/data_rx.c            |  10 +-
 .../wireless/silabs}/wfx/data_rx.h            |   5 +-
 .../wireless/silabs}/wfx/data_tx.c            | 144 +++----
 .../wireless/silabs}/wfx/data_tx.h            |  20 +-
 .../wireless/silabs}/wfx/debug.c              |  80 ++--
 .../wireless/silabs}/wfx/debug.h              |   6 +-
 .../wireless/silabs}/wfx/fwio.c               | 113 +++---
 .../wireless/silabs}/wfx/fwio.h               |   0
 .../wireless/silabs}/wfx/hif_api_cmd.h        | 151 ++++----
 .../wireless/silabs}/wfx/hif_api_general.h    |  64 ++--
 .../wireless/silabs}/wfx/hif_api_mib.h        |  68 ++--
 .../wireless/silabs}/wfx/hif_rx.c             | 168 ++++-----
 .../wireless/silabs}/wfx/hif_rx.h             |   0
 .../wireless/silabs}/wfx/hif_tx.c             | 195 +++++-----
 drivers/net/wireless/silabs/wfx/hif_tx.h      |  61 +++
 drivers/net/wireless/silabs/wfx/hif_tx_mib.c  | 308 +++++++++++++++
 drivers/net/wireless/silabs/wfx/hif_tx_mib.h  |  48 +++
 drivers/net/wireless/silabs/wfx/hwio.c        | 335 +++++++++++++++++
 .../wireless/silabs}/wfx/hwio.h               |  35 +-
 .../wireless/silabs}/wfx/key.c                |  84 ++---
 .../wireless/silabs}/wfx/key.h                |   5 +-
 .../wireless/silabs}/wfx/main.c               | 249 ++++++-------
 .../wireless/silabs}/wfx/main.h               |  13 +-
 .../wireless/silabs}/wfx/queue.c              |  51 ++-
 .../wireless/silabs}/wfx/queue.h              |  13 +-
 .../wireless/silabs}/wfx/scan.c               |  27 +-
 .../wireless/silabs}/wfx/scan.h               |   0
 .../wireless/silabs}/wfx/sta.c                | 207 +++++-----
 .../wireless/silabs}/wfx/sta.h                |  22 +-
 .../wireless/silabs}/wfx/traces.h             |  33 +-
 .../wireless/silabs}/wfx/wfx.h                |  98 ++---
 drivers/staging/Kconfig                       |   1 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/wfx/TODO                      |   6 -
 drivers/staging/wfx/hif_tx.h                  |  60 ---
 drivers/staging/wfx/hif_tx_mib.c              | 324 ----------------
 drivers/staging/wfx/hif_tx_mib.h              |  49 ---
 drivers/staging/wfx/hwio.c                    | 352 ------------------
 include/linux/mmc/sdio_ids.h                  |   7 +
 53 files changed, 1809 insertions(+), 1993 deletions(-)
 rename {drivers/staging/wfx/Documentation => Documentation}/devicetree/bindings/net/wireless/silabs,wfx.yaml (67%)
 create mode 100644 drivers/net/wireless/silabs/Kconfig
 create mode 100644 drivers/net/wireless/silabs/Makefile
 rename drivers/{staging => net/wireless/silabs}/wfx/Kconfig (60%)
 rename drivers/{staging => net/wireless/silabs}/wfx/Makefile (76%)
 rename drivers/{staging => net/wireless/silabs}/wfx/bh.c (81%)
 rename drivers/{staging => net/wireless/silabs}/wfx/bh.h (96%)
 rename drivers/{staging => net/wireless/silabs}/wfx/bus.h (80%)
 rename drivers/{staging => net/wireless/silabs}/wfx/bus_sdio.c (69%)
 rename drivers/{staging => net/wireless/silabs}/wfx/bus_spi.c (67%)
 rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.c (93%)
 rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.h (69%)
 rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.c (79%)
 rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.h (72%)
 rename drivers/{staging => net/wireless/silabs}/wfx/debug.c (78%)
 rename drivers/{staging => net/wireless/silabs}/wfx/debug.h (65%)
 rename drivers/{staging => net/wireless/silabs}/wfx/fwio.c (75%)
 rename drivers/{staging => net/wireless/silabs}/wfx/fwio.h (100%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_cmd.h (80%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_general.h (85%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_mib.h (86%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.c (62%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.h (100%)
 rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.c (64%)
 create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx.h
 create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx_mib.c
 create mode 100644 drivers/net/wireless/silabs/wfx/hif_tx_mib.h
 create mode 100644 drivers/net/wireless/silabs/wfx/hwio.c
 rename drivers/{staging => net/wireless/silabs}/wfx/hwio.h (62%)
 rename drivers/{staging => net/wireless/silabs}/wfx/key.c (70%)
 rename drivers/{staging => net/wireless/silabs}/wfx/key.h (65%)
 rename drivers/{staging => net/wireless/silabs}/wfx/main.c (69%)
 rename drivers/{staging => net/wireless/silabs}/wfx/main.h (79%)
 rename drivers/{staging => net/wireless/silabs}/wfx/queue.c (86%)
 rename drivers/{staging => net/wireless/silabs}/wfx/queue.h (79%)
 rename drivers/{staging => net/wireless/silabs}/wfx/scan.c (81%)
 rename drivers/{staging => net/wireless/silabs}/wfx/scan.h (100%)
 rename drivers/{staging => net/wireless/silabs}/wfx/sta.c (78%)
 rename drivers/{staging => net/wireless/silabs}/wfx/sta.h (81%)
 rename drivers/{staging => net/wireless/silabs}/wfx/traces.h (94%)
 rename drivers/{staging => net/wireless/silabs}/wfx/wfx.h (50%)
 delete mode 100644 drivers/staging/wfx/TODO
 delete mode 100644 drivers/staging/wfx/hif_tx.h
 delete mode 100644 drivers/staging/wfx/hif_tx_mib.c
 delete mode 100644 drivers/staging/wfx/hif_tx_mib.h
 delete mode 100644 drivers/staging/wfx/hwio.c

-- 
2.34.1


^ permalink raw reply	[flat|nested] 53+ messages in thread

end of thread, other threads:[~2022-02-11  7:08 UTC | newest]

Thread overview: 53+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-11 17:14 [PATCH v9 00/24] wfx: get out from the staging area Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip Jerome Pouiller
2022-01-12 10:58   ` Ulf Hansson
2022-01-12 12:45     ` Kalle Valo
2022-01-11 17:14 ` [PATCH v9 02/24] dt-bindings: introduce silabs,wfx.yaml Jerome Pouiller
2022-01-11 20:49   ` Rob Herring
2022-01-11 22:19   ` Rob Herring
2022-01-12  9:51     ` Jérôme Pouiller
2022-01-11 17:14 ` [PATCH v9 03/24] wfx: add Makefile/Kconfig Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 04/24] wfx: add wfx.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 05/24] wfx: add main.c/main.h Jerome Pouiller
2022-01-26  8:20   ` Jérôme Pouiller
2022-02-10 14:20     ` Kalle Valo
2022-02-10 14:41       ` Jérôme Pouiller
2022-02-10 14:51         ` Kalle Valo
2022-02-10 15:13           ` Jérôme Pouiller
2022-02-10 16:25             ` Kalle Valo
2022-02-10 16:37               ` Jérôme Pouiller
2022-02-11  7:08                 ` Kalle Valo
2022-02-10 14:23   ` Pali Rohár
2022-01-11 17:14 ` [PATCH v9 06/24] wfx: add bus.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 07/24] wfx: add bus_spi.c Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 08/24] wfx: add bus_sdio.c Jerome Pouiller
2022-01-12 10:51   ` Ulf Hansson
2022-01-12 10:58   ` Pali Rohár
2022-01-12 11:18     ` Jérôme Pouiller
2022-01-12 11:43       ` Pali Rohár
2022-01-12 12:06         ` Greg Kroah-Hartman
2022-01-12 12:14           ` Pali Rohár
2022-01-12 15:03         ` Ulf Hansson
2022-01-12 16:45         ` Jérôme Pouiller
2022-01-12 17:48           ` Pali Rohár
2022-01-12 18:23             ` Jérôme Pouiller
2022-01-13 12:07               ` Ulf Hansson
2022-01-11 17:14 ` [PATCH v9 09/24] wfx: add hwio.c/hwio.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 10/24] wfx: add fwio.c/fwio.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 11/24] wfx: add bh.c/bh.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 12/24] wfx: add hif_api_*.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 13/24] wfx: add hif_tx*.c/hif_tx*.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 14/24] wfx: add key.c/key.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 15/24] wfx: add hif_rx.c/hif_rx.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 16/24] wfx: add data_rx.c/data_rx.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 17/24] wfx: add queue.c/queue.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 18/24] wfx: add data_tx.c/data_tx.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 19/24] wfx: add sta.c/sta.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 20/24] wfx: add scan.c/scan.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 21/24] wfx: add debug.c/debug.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 22/24] wfx: add traces.h Jerome Pouiller
2022-01-11 17:14 ` [PATCH v9 23/24] wfx: remove from the staging area Jerome Pouiller
2022-01-12  7:49   ` Kalle Valo
2022-01-12  9:32     ` Jérôme Pouiller
2022-01-12 12:46       ` Kalle Valo
2022-01-11 17:14 ` [PATCH v9 24/24] wfx: get out " Jerome Pouiller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).