Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
* [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
@ 2019-01-11 12:11 Matthias Brugger
  2019-01-14 15:33 ` Josh Boyer
  0 siblings, 1 reply; 4+ messages in thread
From: Matthias Brugger @ 2019-01-11 12:11 UTC (permalink / raw)
  To: linux-firmware; +Cc: linux-wireless, serge, phil, arend

Hi Josh,
Hi all,

This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
B and bcm43455 for Raspberry Pi 3 Model B+.

Please have a look and, if convenient, pull :)

Best regards,
Matthias

---
The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:

  Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)

are available in the Git repository at:


ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
tags/add-rpi-fw

for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:

  brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
+0100)

----------------------------------------------------------------
- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B

----------------------------------------------------------------
Matthias Brugger (2):
      brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
      brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B

 WHENCE                                      |   3 +
 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt |  47 ++++++++++++++++
 brcm/brcmfmac43455-sdio.clm_blob            | Bin 0 -> 14036 bytes
 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt |  82 ++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+)
 create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
 create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
 create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
  2019-01-11 12:11 [GIT PULL] Add NVRAM files for bcm43455 and bcm43430 Matthias Brugger
@ 2019-01-14 15:33 ` Josh Boyer
  2019-01-14 17:32   ` Josh Boyer
  0 siblings, 1 reply; 4+ messages in thread
From: Josh Boyer @ 2019-01-14 15:33 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: Linux Firmware, linux-wireless, serge, phil, Arend van Spriel

On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
>
> Hi Josh,
> Hi all,
>
> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> B and bcm43455 for Raspberry Pi 3 Model B+.
>
> Please have a look and, if convenient, pull :)
>
> Best regards,
> Matthias
>
> ---
> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>
>   Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>
> are available in the Git repository at:
>
>
> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> tags/add-rpi-fw
>
> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>
>   brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> +0100)
>
> ----------------------------------------------------------------
> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>
> ----------------------------------------------------------------
> Matthias Brugger (2):
>       brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
>       brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>
>  WHENCE                                      |   3 +
>  brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt |  47 ++++++++++++++++
>  brcm/brcmfmac43455-sdio.clm_blob            | Bin 0 -> 14036 bytes
>  brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt |  82 ++++++++++++++++++++++++++++
>  4 files changed, 132 insertions(+)
>  create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
>  create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
>  create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt

Pulled and pushed out.

josh

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
  2019-01-14 15:33 ` Josh Boyer
@ 2019-01-14 17:32   ` Josh Boyer
  2019-01-14 17:54     ` Matthias Brugger
  0 siblings, 1 reply; 4+ messages in thread
From: Josh Boyer @ 2019-01-14 17:32 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: Linux Firmware, linux-wireless, serge, Phil Elwell, Arend van Spriel

On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <jwboyer@kernel.org> wrote:
>
> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
> >
> > Hi Josh,
> > Hi all,
> >
> > This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> > B and bcm43455 for Raspberry Pi 3 Model B+.
> >
> > Please have a look and, if convenient, pull :)
> >
> > Best regards,
> > Matthias
> >
> > ---
> > The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
> >
> >   Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
> >
> > are available in the Git repository at:
> >
> >
> > ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> > tags/add-rpi-fw
> >
> > for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
> >
> >   brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> > +0100)
> >
> > ----------------------------------------------------------------
> > - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> > - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
> >
> > ----------------------------------------------------------------
> > Matthias Brugger (2):
> >       brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
> >       brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
> >
> >  WHENCE                                      |   3 +
> >  brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt |  47 ++++++++++++++++
> >  brcm/brcmfmac43455-sdio.clm_blob            | Bin 0 -> 14036 bytes
> >  brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt |  82 ++++++++++++++++++++++++++++
> >  4 files changed, 132 insertions(+)
> >  create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
> >  create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
> >  create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>
> Pulled and pushed out.

I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
some question around the clm_blob file an license applicability.  If
that gets resolved, please submit a new patch to add those files.

josh

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430
  2019-01-14 17:32   ` Josh Boyer
@ 2019-01-14 17:54     ` Matthias Brugger
  0 siblings, 0 replies; 4+ messages in thread
From: Matthias Brugger @ 2019-01-14 17:54 UTC (permalink / raw)
  To: Josh Boyer
  Cc: Linux Firmware, linux-wireless, serge, Phil Elwell, Arend van Spriel

Hi Josh,

On 14/01/2019 18:32, Josh Boyer wrote:
> On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <jwboyer@kernel.org> wrote:
>>
>> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <mbrugger@suse.com> wrote:
>>>
>>> Hi Josh,
>>> Hi all,
>>>
>>> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
>>> B and bcm43455 for Raspberry Pi 3 Model B+.
>>>
>>> Please have a look and, if convenient, pull :)
>>>
>>> Best regards,
>>> Matthias
>>>
>>> ---
>>> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>>>
>>>   Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>>>
>>> are available in the Git repository at:
>>>
>>>
>>> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
>>> tags/add-rpi-fw
>>>
>>> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>>>
>>>   brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
>>> +0100)
>>>
>>> ----------------------------------------------------------------
>>> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
>>> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>>>
>>> ----------------------------------------------------------------
>>> Matthias Brugger (2):
>>>       brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
>>>       brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>>>
>>>  WHENCE                                      |   3 +
>>>  brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt |  47 ++++++++++++++++
>>>  brcm/brcmfmac43455-sdio.clm_blob            | Bin 0 -> 14036 bytes
>>>  brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt |  82 ++++++++++++++++++++++++++++
>>>  4 files changed, 132 insertions(+)
>>>  create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
>>>  create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
>>>  create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>>
>> Pulled and pushed out.
> 
> I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
> some question around the clm_blob file an license applicability.  If
> that gets resolved, please submit a new patch to add those files.
> 

Thanks, actually I realized that there are some more problems with this pull
request, so thank you for reverting. I'll send a new one soon.

Regards,
Matthias

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 12:11 [GIT PULL] Add NVRAM files for bcm43455 and bcm43430 Matthias Brugger
2019-01-14 15:33 ` Josh Boyer
2019-01-14 17:32   ` Josh Boyer
2019-01-14 17:54     ` Matthias Brugger

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox