From: Shaveta Leekha <shaveta@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: Shaveta Leekha <shaveta@freescale.com>,
Andy Fleming <afleming@freescale.com>,
Zhao Chenhui <chenhui.zhao@freescale.com>
Subject: [PATCH 3/6] powerpc/fsl-booke: Add initial silicon device tree files for B4420QDS
Date: Fri, 15 Mar 2013 13:25:06 +0530 [thread overview]
Message-ID: <1363334109-21922-3-git-send-email-shaveta@freescale.com> (raw)
In-Reply-To: <1363334109-21922-1-git-send-email-shaveta@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 151 +++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 70 ++++++++++++
2 files changed, 221 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
new file mode 100644
index 0000000..e45d605
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -0,0 +1,151 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ interrupts = <20 2 0 0>;
+ pcie@0 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <20 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 2>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 8>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 4>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 0>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 1>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,b4420-device-config";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ fsl,liodn-bits = <12>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2";
+ reg = <0xe2000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+
+/include/ "qonverge-usb2-dr-0.dtsi"
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+ };
+
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+
+ L2: l2-cache-controller@c20000 {
+ next-level-cache = <&cpc>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
new file mode 100644
index 0000000..c1ade3b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,B4420";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,e6500@0 {
+ device_type = "cpu";
+ reg = <0 1>;
+ next-level-cache = <&L2>;
+ };
+ PowerPC,e6500@1 {
+ device_type = "cpu";
+ reg = <2 3>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
--
1.7.6.GIT
next prev parent reply other threads:[~2013-03-15 7:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 7:55 [PATCH 1/6] powerpc/fsl-booke: Add initial silicon device tree files for B4860QDS Shaveta Leekha
2013-03-15 7:55 ` [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree Shaveta Leekha
2013-03-15 20:26 ` Kumar Gala
2013-03-18 6:31 ` Leekha Shaveta-B20052
2013-03-18 15:02 ` Kumar Gala
2013-03-19 6:11 ` Leekha Shaveta-B20052
2013-03-19 6:23 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` Shaveta Leekha [this message]
2013-03-15 20:30 ` [PATCH 3/6] powerpc/fsl-booke: Add initial silicon device tree files for B4420QDS Kumar Gala
2013-03-15 7:55 ` [PATCH 4/6] powerpc/fsl-booke: Add initial B4420QDS board device tree Shaveta Leekha
2013-03-15 20:31 ` Kumar Gala
2013-03-18 7:00 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` [PATCH 5/6] powerpc/fsl-booke: Add B4_QDS board support Shaveta Leekha
2013-03-15 15:58 ` Kumar Gala
2013-03-18 6:28 ` Leekha Shaveta-B20052
2013-03-18 14:56 ` Kumar Gala
2013-03-19 6:07 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` [PATCH 6/6] powerpc/85xx: Update corenet64_smp_defconfig for B4_QDS Shaveta Leekha
2013-03-15 13:07 ` [PATCH 1/6] powerpc/fsl-booke: Add initial silicon device tree files for B4860QDS Timur Tabi
2013-03-18 7:41 ` Leekha Shaveta-B20052
2013-03-18 15:03 ` Kumar Gala
2013-03-19 6:13 ` Leekha Shaveta-B20052
2013-03-20 10:32 ` Leekha Shaveta-B20052
2013-03-20 11:37 ` Timur Tabi
2013-03-15 15:54 ` Kumar Gala
2013-03-15 20:29 ` Kumar Gala
2013-03-18 6:59 ` Leekha Shaveta-B20052
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363334109-21922-3-git-send-email-shaveta@freescale.com \
--to=shaveta@freescale.com \
--cc=afleming@freescale.com \
--cc=chenhui.zhao@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).