From: Kumar Gala <galak@kernel.crashing.org>
To: Shaveta Leekha <shaveta@freescale.com>
Cc: Minghuan Lian <Minghuan.Lian@freescale.com>,
linuxppc-dev@lists.ozlabs.org,
Andy Fleming <afleming@freescale.com>,
Poonam Aggrwal <poonam.aggrwal@freescale.com>,
Ramneek Mehresh <ramneek.mehresh@freescale.com>
Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree
Date: Fri, 15 Mar 2013 15:26:36 -0500 [thread overview]
Message-ID: <7EB2D4A9-A5BC-4958-9AD8-51B254666356@kernel.crashing.org> (raw)
In-Reply-To: <1363334109-21922-2-git-send-email-shaveta@freescale.com>
On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote:
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> arch/powerpc/boot/dts/b4860qds.dts | 178 =
++++++++++++++++++++++++++++++++++++
> 1 files changed, 178 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/b4860qds.dts
>=20
> diff --git a/arch/powerpc/boot/dts/b4860qds.dts =
b/arch/powerpc/boot/dts/b4860qds.dts
> new file mode 100644
> index 0000000..ae6ac05
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/b4860qds.dts
> @@ -0,0 +1,178 @@
> +/*
> + * B4860DS Device Tree Source
> + *
> + * Copyright 2012 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above =
copyright
> + * notice, this list of conditions and the following =
disclaimer.
> + * * Redistributions in binary form must reproduce the above =
copyright
> + * notice, this list of conditions and the following disclaimer =
in the
> + * documentation and/or other materials provided with the =
distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote =
products
> + * derived from this software without specific prior written =
permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free =
Software
> + * Foundation, either version 2 of that License or (at your option) =
any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =
IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =
FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =
CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =
USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/b4860si-pre.dtsi"
> +
> +/ {
> + model =3D "fsl,B4860QDS";
> + compatible =3D "fsl,B4860QDS";
> + #address-cells =3D <2>;
> + #size-cells =3D <2>;
> + interrupt-parent =3D <&mpic>;
> +
> + ifc: localbus@ffe124000 {
> + reg =3D <0xf 0xfe124000 0 0x2000>;
> + ranges =3D <0 0 0xf 0xe8000000 0x08000000
> + 2 0 0xf 0xff800000 0x00010000
> + 3 0 0xf 0xffdf0000 0x00008000>;
> +
> + nor@0,0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "cfi-flash";
> + reg =3D <0x0 0x0 0x8000000>;
> + bank-width =3D <2>;
> + device-width =3D <1>;
> + };
> +
> + nand@2,0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "fsl,ifc-nand";
> + reg =3D <0x2 0x0 0x10000>;
> +
> + partition@0 {
> + /* This location must not be altered */
> + /* 1MB for u-boot Bootloader Image */
> + reg =3D <0x0 0x00100000>;
> + label =3D "NAND U-Boot Image";
> + read-only;
> + };
> +
> + partition@100000 {
> + /* 1MB for DTB Image */
> + reg =3D <0x00100000 0x00100000>;
> + label =3D "NAND DTB Image";
> + };
> +
> + partition@200000 {
> + /* 10MB for Linux Kernel Image */
> + reg =3D <0x00200000 0x00A00000>;
> + label =3D "NAND Linux Kernel Image";
> + };
> +
> + partition@c00000 {
> + /* 500MB for Root file System Image */
> + reg =3D <0x00c00000 0x1F400000>;
> + label =3D "NAND RFS Image";
> + };
> + };
> +
> + board-control@3,0 {
> + compatible =3D "fsl,b4860qds-fpga", =
"fsl,fpga-qixis";
> + reg =3D <3 0 0x300>;
> + };
> + };
> +
dscr nodes are missing and should be included
> + memory {
> + device_type =3D "memory";
> + };
> +
> + soc: soc@ffe000000 {
> + ranges =3D <0x00000000 0xf 0xfe000000 0x1000000>;
> + reg =3D <0xf 0xfe000000 0 0x00001000>;
> + spi@110000 {
> + flash@0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "sst,sst25wf040";
> + reg =3D <0>;
> + spi-max-frequency =3D <40000000>; /* =
input clock */
> + };
> + };
> +
> + sdhc@114000 {
> + status =3D "disabled";
> + };
> +
> + i2c@118000 {
> + eeprom@50 {
> + compatible =3D "at24,24c64";
> + reg =3D <0x50>;
> + };
> + eeprom@51 {
> + compatible =3D "at24,24c256";
> + reg =3D <0x51>;
> + };
> + eeprom@53 {
> + compatible =3D "at24,24c256";
> + reg =3D <0x53>;
> + };
> + eeprom@57 {
> + compatible =3D "at24,24c256";
> + reg =3D <0x57>;
> + };
> + rtc@68 {
> + compatible =3D "dallas,ds3232";
> + reg =3D <0x68>;
> + interrupts =3D <0x1 0x1 0 0>;
there is no IRQ for RTC on the board.
> + };
> + };
> +
> + usb@210000 {
> + dr_mode =3D "host";
> + phy_type =3D "ulpi";
> + };
> +
> + };
> +
> + pci0: pcie@ffe200000 {
> + reg =3D <0xf 0xfe200000 0 0x10000>;
> + ranges =3D <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 =
0x20000000
> + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 =
0x00010000>;
> + pcie@0 {
> + ranges =3D <0x02000000 0 0xe0000000
> + 0x02000000 0 0xe0000000
> + 0 0x20000000
> +
> + 0x01000000 0 0x00000000
> + 0x01000000 0 0x00000000
> + 0 0x00010000>;
> + };
> + };
> +
> + rio: rapidio@ffe0c0000 {
> + reg =3D <0xf 0xfe0c0000 0 0x11000>;
> +
> + port1 {
> + ranges =3D <0 0 0xc 0x20000000 0 0x10000000>;
> + };
> + port2 {
> + ranges =3D <0 0 0xc 0x30000000 0 0x10000000>;
> + };
> + };
> +
> +};
> +
> +/include/ "fsl/b4860si-post.dtsi"
> --=20
> 1.7.6.GIT
>=20
next prev parent reply other threads:[~2013-03-15 20:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 7:55 [PATCH 1/6] powerpc/fsl-booke: Add initial silicon device tree files for B4860QDS Shaveta Leekha
2013-03-15 7:55 ` [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree Shaveta Leekha
2013-03-15 20:26 ` Kumar Gala [this message]
2013-03-18 6:31 ` Leekha Shaveta-B20052
2013-03-18 15:02 ` Kumar Gala
2013-03-19 6:11 ` Leekha Shaveta-B20052
2013-03-19 6:23 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` [PATCH 3/6] powerpc/fsl-booke: Add initial silicon device tree files for B4420QDS Shaveta Leekha
2013-03-15 20:30 ` Kumar Gala
2013-03-15 7:55 ` [PATCH 4/6] powerpc/fsl-booke: Add initial B4420QDS board device tree Shaveta Leekha
2013-03-15 20:31 ` Kumar Gala
2013-03-18 7:00 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` [PATCH 5/6] powerpc/fsl-booke: Add B4_QDS board support Shaveta Leekha
2013-03-15 15:58 ` Kumar Gala
2013-03-18 6:28 ` Leekha Shaveta-B20052
2013-03-18 14:56 ` Kumar Gala
2013-03-19 6:07 ` Leekha Shaveta-B20052
2013-03-15 7:55 ` [PATCH 6/6] powerpc/85xx: Update corenet64_smp_defconfig for B4_QDS Shaveta Leekha
2013-03-15 13:07 ` [PATCH 1/6] powerpc/fsl-booke: Add initial silicon device tree files for B4860QDS Timur Tabi
2013-03-18 7:41 ` Leekha Shaveta-B20052
2013-03-18 15:03 ` Kumar Gala
2013-03-19 6:13 ` Leekha Shaveta-B20052
2013-03-20 10:32 ` Leekha Shaveta-B20052
2013-03-20 11:37 ` Timur Tabi
2013-03-15 15:54 ` Kumar Gala
2013-03-15 20:29 ` Kumar Gala
2013-03-18 6:59 ` Leekha Shaveta-B20052
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7EB2D4A9-A5BC-4958-9AD8-51B254666356@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=Minghuan.Lian@freescale.com \
--cc=afleming@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=poonam.aggrwal@freescale.com \
--cc=ramneek.mehresh@freescale.com \
--cc=shaveta@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).