From: Paul Mackerras <paulus@ozlabs.org>
To: kvm@vger.kernel.org, kvm-ppc@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 03/13] powerpc/powernv: Define real-mode versions of OPAL XICS accessors
Date: Fri, 18 Nov 2016 18:28:32 +1100 [thread overview]
Message-ID: <1479454122-26994-4-git-send-email-paulus@ozlabs.org> (raw)
In-Reply-To: <1479454122-26994-1-git-send-email-paulus@ozlabs.org>
This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.
It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
arch/powerpc/include/asm/opal.h | 3 +++
arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +++
arch/powerpc/platforms/powernv/opal.c | 2 ++
3 files changed, 8 insertions(+)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index e958b70..5c7db0f 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -220,9 +220,12 @@ int64_t opal_pci_set_power_state(uint64_t async_token, uint64_t id,
int64_t opal_pci_poll2(uint64_t id, uint64_t data);
int64_t opal_int_get_xirr(uint32_t *out_xirr, bool just_poll);
+int64_t opal_rm_int_get_xirr(__be32 *out_xirr, bool just_poll);
int64_t opal_int_set_cppr(uint8_t cppr);
int64_t opal_int_eoi(uint32_t xirr);
+int64_t opal_rm_int_eoi(uint32_t xirr);
int64_t opal_int_set_mfrr(uint32_t cpu, uint8_t mfrr);
+int64_t opal_rm_int_set_mfrr(uint32_t cpu, uint8_t mfrr);
int64_t opal_pci_tce_kill(uint64_t phb_id, uint32_t kill_type,
uint32_t pe_num, uint32_t tce_size,
uint64_t dma_addr, uint32_t npages);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 44d2d84..3aa40f1 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -304,8 +304,11 @@ OPAL_CALL(opal_pci_get_presence_state, OPAL_PCI_GET_PRESENCE_STATE);
OPAL_CALL(opal_pci_get_power_state, OPAL_PCI_GET_POWER_STATE);
OPAL_CALL(opal_pci_set_power_state, OPAL_PCI_SET_POWER_STATE);
OPAL_CALL(opal_int_get_xirr, OPAL_INT_GET_XIRR);
+OPAL_CALL_REAL(opal_rm_int_get_xirr, OPAL_INT_GET_XIRR);
OPAL_CALL(opal_int_set_cppr, OPAL_INT_SET_CPPR);
OPAL_CALL(opal_int_eoi, OPAL_INT_EOI);
+OPAL_CALL_REAL(opal_rm_int_eoi, OPAL_INT_EOI);
OPAL_CALL(opal_int_set_mfrr, OPAL_INT_SET_MFRR);
+OPAL_CALL_REAL(opal_rm_int_set_mfrr, OPAL_INT_SET_MFRR);
OPAL_CALL(opal_pci_tce_kill, OPAL_PCI_TCE_KILL);
OPAL_CALL_REAL(opal_rm_pci_tce_kill, OPAL_PCI_TCE_KILL);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 6c9a65b..b3b8930 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -896,3 +896,5 @@ EXPORT_SYMBOL_GPL(opal_leds_get_ind);
EXPORT_SYMBOL_GPL(opal_leds_set_ind);
/* Export this symbol for PowerNV Operator Panel class driver */
EXPORT_SYMBOL_GPL(opal_write_oppanel_async);
+/* Export this for KVM */
+EXPORT_SYMBOL_GPL(opal_int_set_mfrr);
--
2.7.4
next prev parent reply other threads:[~2016-11-18 7:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 7:28 [PATCH 00/13] KVM: PPC: Support POWER9 guests Paul Mackerras
2016-11-18 7:28 ` [PATCH 01/13] powerpc/64: Add some more SPRs and SPR bits for POWER9 Paul Mackerras
2016-11-18 7:28 ` [PATCH 02/13] powerpc/64: Provide functions for accessing POWER9 partition table Paul Mackerras
2016-11-18 14:27 ` Aneesh Kumar K.V
2016-11-19 4:19 ` Paul Mackerras
2016-11-19 6:35 ` Aneesh Kumar K.V
2016-11-21 2:14 ` Paul Mackerras
2016-11-19 0:45 ` Balbir Singh
2016-11-19 4:23 ` Paul Mackerras
2016-11-18 7:28 ` Paul Mackerras [this message]
2016-11-18 7:28 ` [PATCH 04/13] KVM: PPC: Book3S HV: Don't lose hardware R/C bit updates in H_PROTECT Paul Mackerras
2016-11-18 7:28 ` [PATCH 05/13] KVM: PPC: Book3S HV: Adapt to new HPTE format on POWER9 Paul Mackerras
2016-11-19 0:38 ` Balbir Singh
2016-11-21 2:02 ` Paul Mackerras
2016-11-18 7:28 ` [PATCH 06/13] KVM: PPC: Book3S HV: Set partition table rather than SDR1 " Paul Mackerras
2016-11-19 1:01 ` Balbir Singh
2016-11-18 7:28 ` [PATCH 07/13] KVM: PPC: Book3S HV: Adjust host/guest context switch for POWER9 Paul Mackerras
2016-11-18 14:35 ` Aneesh Kumar K.V
2016-11-19 4:02 ` Paul Mackerras
2016-11-18 7:28 ` [PATCH 08/13] KVM: PPC: Book3S HV: Add new POWER9 guest-accessible SPRs Paul Mackerras
2016-11-18 7:28 ` [PATCH 09/13] KVM: PPC: Book3S HV: Adapt TLB invalidations to work on POWER9 Paul Mackerras
2016-11-18 14:41 ` Aneesh Kumar K.V
2016-11-18 21:57 ` Benjamin Herrenschmidt
2016-11-19 4:14 ` Paul Mackerras
2016-11-19 4:41 ` Benjamin Herrenschmidt
2016-11-19 4:13 ` Paul Mackerras
2016-11-18 7:28 ` [PATCH 10/13] KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores " Paul Mackerras
2016-11-18 14:47 ` Aneesh Kumar K.V
2016-11-19 3:53 ` Paul Mackerras
2016-11-18 7:28 ` [PATCH 11/13] KVM: PPC: Book3S HV: Use OPAL XICS emulation " Paul Mackerras
2016-11-18 7:28 ` [PATCH 12/13] KVM: PPC: Book3S HV: Use stop instruction rather than nap " Paul Mackerras
2016-11-18 7:28 ` [PATCH 13/13] KVM: PPC: Book3S HV: Treat POWER9 CPU threads as independent subcores Paul Mackerras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479454122-26994-4-git-send-email-paulus@ozlabs.org \
--to=paulus@ozlabs.org \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).