LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Hari Bathini <hbathini@linux.ibm.com>
To: linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>,
	Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
	Vasant Hegde <hegdevasant@linux.ibm.com>,
	Oliver <oohall@gmail.com>, Nicholas Piggin <npiggin@gmail.com>,
	Daniel Axtens <dja@axtens.net>
Subject: [PATCH v5 07/31] powerpc/fadump: release all the memory above boot memory size
Date: Tue, 20 Aug 2019 17:34:58 +0530
Message-ID: <156630269797.8896.13397199124372832591.stgit@hbathini.in.ibm.com> (raw)
In-Reply-To: <156630261682.8896.3418665808003586786.stgit@hbathini.in.ibm.com>

Except for reserve dump area which is permanent reserved, all memory
above boot memory size is released when the dump is invalidated. Make
this a bit more explicit in the code.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
---
 arch/powerpc/kernel/fadump.c |   34 ++++++++++------------------------
 1 file changed, 10 insertions(+), 24 deletions(-)

diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 5f5bc37..f26ab58 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -341,6 +341,8 @@ int __init fadump_reserve_mem(void)
 	else
 		memory_boundary = memblock_end_of_DRAM();
 
+	size = get_fadump_area_size();
+	fw_dump.reserve_dump_area_size = size;
 	if (fw_dump.dump_active) {
 		pr_info("Firmware-assisted dump is active.\n");
 
@@ -366,12 +368,15 @@ int __init fadump_reserve_mem(void)
 				be64_to_cpu(fdm_active->rmr_region.destination_address) +
 				be64_to_cpu(fdm_active->rmr_region.source_len);
 		pr_debug("fadumphdr_addr = %pa\n", &fw_dump.fadumphdr_addr);
-		fw_dump.reserve_dump_area_start = base;
-		fw_dump.reserve_dump_area_size = size;
-	} else {
-		size = get_fadump_area_size();
 
 		/*
+		 * Start address of reserve dump area (permanent reservation)
+		 * for re-registering FADump after dump capture.
+		 */
+		fw_dump.reserve_dump_area_start =
+			be64_to_cpu(fdm_active->cpu_state_data.destination_address);
+	} else {
+		/*
 		 * Reserve memory at an offset closer to bottom of the RAM to
 		 * minimize the impact of memory hot-remove operation. We can't
 		 * use memblock_find_in_range() here since it doesn't allocate
@@ -397,7 +402,6 @@ int __init fadump_reserve_mem(void)
 			(unsigned long)(memblock_phys_mem_size() >> 20));
 
 		fw_dump.reserve_dump_area_start = base;
-		fw_dump.reserve_dump_area_size = size;
 		return fadump_cma_init();
 	}
 	return 1;
@@ -1139,34 +1143,16 @@ static void fadump_release_memory(unsigned long begin, unsigned long end)
 
 static void fadump_invalidate_release_mem(void)
 {
-	unsigned long reserved_area_start, reserved_area_end;
-	unsigned long destination_address;
-
 	mutex_lock(&fadump_mutex);
 	if (!fw_dump.dump_active) {
 		mutex_unlock(&fadump_mutex);
 		return;
 	}
 
-	destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
 	fadump_cleanup();
 	mutex_unlock(&fadump_mutex);
 
-	/*
-	 * Save the current reserved memory bounds we will require them
-	 * later for releasing the memory for general use.
-	 */
-	reserved_area_start = fw_dump.reserve_dump_area_start;
-	reserved_area_end = reserved_area_start +
-			fw_dump.reserve_dump_area_size;
-	/*
-	 * Setup reserve_dump_area_start and its size so that we can
-	 * reuse this reserved memory for Re-registration.
-	 */
-	fw_dump.reserve_dump_area_start = destination_address;
-	fw_dump.reserve_dump_area_size = get_fadump_area_size();
-
-	fadump_release_memory(reserved_area_start, reserved_area_end);
+	fadump_release_memory(fw_dump.boot_memory_size, memblock_end_of_DRAM());
 	if (fw_dump.cpu_notes_buf) {
 		fadump_cpu_notes_buf_free(
 				(unsigned long)__va(fw_dump.cpu_notes_buf),


  parent reply index

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20 12:04 [PATCH v5 00/31] Add FADump support on PowerNV platform Hari Bathini
2019-08-20 12:04 ` [PATCH v5 01/31] powerpc/fadump: move internal macros/definitions to a new header Hari Bathini
2019-09-03 11:09   ` Michael Ellerman
2019-09-03 16:05     ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 02/31] powerpc/fadump: move internal code to a new file Hari Bathini
2019-09-03 11:09   ` Michael Ellerman
2019-09-03 16:05     ` Hari Bathini
2019-09-04  9:02       ` Mahesh Jagannath Salgaonkar
2019-09-04 18:26         ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 03/31] powerpc/fadump: Improve fadump documentation Hari Bathini
2019-08-20 12:04 ` [PATCH v5 04/31] pseries/fadump: move rtas specific definitions to platform code Hari Bathini
2019-08-20 12:04 ` [PATCH v5 05/31] pseries/fadump: introduce callbacks for platform specific operations Hari Bathini
2019-09-03 11:10   ` Michael Ellerman
2019-09-03 16:06     ` Hari Bathini
2019-09-06  6:39       ` Hari Bathini
2019-08-20 12:04 ` [PATCH v5 06/31] pseries/fadump: define register/un-register callback functions Hari Bathini
2019-09-03 11:10   ` Michael Ellerman
2019-09-03 17:15     ` Hari Bathini
2019-08-20 12:04 ` Hari Bathini [this message]
2019-09-03 11:10   ` [PATCH v5 07/31] powerpc/fadump: release all the memory above boot memory size Michael Ellerman
2019-09-03 16:27     ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 08/31] pseries/fadump: move out platform specific support from generic code Hari Bathini
2019-08-20 12:05 ` [PATCH v5 09/31] powerpc/fadump: use FADump instead of fadump for how it is pronounced Hari Bathini
2019-08-20 12:05 ` [PATCH v5 10/31] opal: add MPIPL interface definitions Hari Bathini
2019-09-03 11:10   ` Michael Ellerman
2019-09-03 16:28     ` Hari Bathini
2019-09-04 11:03       ` Michael Ellerman
2019-09-04 11:05   ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 11/31] powernv/fadump: add fadump support on powernv Hari Bathini
2019-09-03 11:10   ` Michael Ellerman
2019-09-03 16:31     ` Hari Bathini
2019-09-04 14:33       ` Hari Bathini
2019-09-05  3:11         ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 12/31] powernv/fadump: register kernel metadata address with opal Hari Bathini
2019-09-04 11:25   ` Michael Ellerman
2019-08-20 12:05 ` [PATCH v5 13/31] powernv/fadump: reset metadata address during clean up Hari Bathini
2019-08-27 12:00   ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 14/31] powernv/fadump: define register/un-register callback functions Hari Bathini
2019-09-05  4:15   ` Michael Ellerman
2019-09-05  7:23   ` Michael Ellerman
2019-09-05  9:54     ` Hari Bathini
2019-08-20 12:05 ` [PATCH v5 15/31] powernv/fadump: support copying multiple kernel boot memory regions Hari Bathini
2019-09-04 11:30   ` Michael Ellerman
2019-09-04 20:20     ` Hari Bathini
2019-09-05  3:13       ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 16/31] powernv/fadump: process the crashdump by exporting it as /proc/vmcore Hari Bathini
2019-09-04 11:42   ` Michael Ellerman
2019-09-04 21:01     ` Hari Bathini
2019-08-20 12:06 ` [PATCH v5 17/31] powernv/fadump: Warn before processing partial crashdump Hari Bathini
2019-09-04 11:48   ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 18/31] powernv/fadump: handle invalidation of crashdump and re-registraion Hari Bathini
2019-08-20 12:06 ` [PATCH v5 19/31] powerpc/fadump: Update documentation about OPAL platform support Hari Bathini
2019-09-04 11:51   ` Michael Ellerman
2019-09-04 12:08     ` Oliver O'Halloran
2019-09-05  3:15       ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 20/31] powerpc/fadump: use smaller offset while finding memory for reservation Hari Bathini
2019-09-04 11:54   ` Michael Ellerman
2019-08-20 12:06 ` [PATCH v5 21/31] powernv/fadump: process architected register state data provided by firmware Hari Bathini
2019-09-04 12:20   ` Michael Ellerman
2019-09-09 13:23     ` Hari Bathini
2019-09-09 15:33       ` Oliver O'Halloran
2019-09-10  8:48         ` Hari Bathini
2019-09-10 14:05           ` Michael Ellerman
2019-09-10 16:10             ` Hari Bathini
2019-08-20 12:06 ` [PATCH v5 22/31] powerpc/fadump: make crash memory ranges array allocation generic Hari Bathini
2019-08-20 12:06 ` [PATCH v5 23/31] powerpc/fadump: consider reserved ranges while releasing memory Hari Bathini
2019-08-20 12:07 ` [PATCH v5 24/31] powerpc/fadump: improve how crashed kernel's memory is reserved Hari Bathini
2019-08-20 12:07 ` [PATCH v5 25/31] powernv/fadump: add support to preserve crash data on FADUMP disabled kernel Hari Bathini
2019-08-20 12:07 ` [PATCH v5 26/31] powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP Hari Bathini
2019-08-20 12:07 ` [PATCH v5 27/31] powernv/opalcore: export /sys/firmware/opal/core for analysing opal crashes Hari Bathini
2019-08-20 12:07 ` [PATCH v5 28/31] powernv/opalcore: provide an option to invalidate /sys/firmware/opal/core file Hari Bathini
2019-08-20 12:07 ` [PATCH v5 29/31] powerpc/fadump: consider f/w load area Hari Bathini
2019-08-20 12:07 ` [PATCH v5 30/31] powernv/fadump: update documentation about option to release opalcore Hari Bathini
2019-08-20 12:07 ` [PATCH v5 31/31] powernv/fadump: support holes in kernel boot memory area Hari Bathini

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=156630269797.8896.13397199124372832591.stgit@hbathini.in.ibm.com \
    --to=hbathini@linux.ibm.com \
    --cc=ananth@linux.ibm.com \
    --cc=dja@axtens.net \
    --cc=hegdevasant@linux.ibm.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mahesh@linux.ibm.com \
    --cc=npiggin@gmail.com \
    --cc=oohall@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git