LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
@ 2019-11-08 22:40 Li Yang
  0 siblings, 0 replies; only message in thread
From: Li Yang @ 2019-11-08 22:40 UTC (permalink / raw)
  To: Alexandre Belloni, YueHaibing
  Cc: Biwen Li, linuxppc-dev, lkml, linux-arm-kernel, Li Yang

The Flextimer alarm is primarily used as a wakeup source for system
power management.  But it shouldn't select the power management driver
as they don't really have dependency of each other.

Also remove the default y as it is not a critical feature for the
systems.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 drivers/rtc/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 1adf9f815652..b33b80243143 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1337,8 +1337,6 @@ config RTC_DRV_IMXDI
 config RTC_DRV_FSL_FTM_ALARM
 	tristate "Freescale FlexTimer alarm timer"
 	depends on ARCH_LAYERSCAPE || SOC_LS1021A
-	select FSL_RCPM
-	default y
 	help
 	   For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
 	   LS1088A, LS208xA, we can use FTM as the wakeup source.
-- 
2.17.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-08 22:40 [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig Li Yang

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git