* [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
@ 2019-11-08 22:40 Li Yang
2019-11-08 22:40 ` Li Yang
2019-11-15 13:01 ` Alexandre Belloni
0 siblings, 2 replies; 3+ messages in thread
From: Li Yang @ 2019-11-08 22:40 UTC (permalink / raw)
To: Alexandre Belloni, YueHaibing
Cc: Biwen Li, linuxppc-dev, lkml, linux-arm-kernel, Li Yang
The Flextimer alarm is primarily used as a wakeup source for system
power management. But it shouldn't select the power management driver
as they don't really have dependency of each other.
Also remove the default y as it is not a critical feature for the
systems.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
drivers/rtc/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 1adf9f815652..b33b80243143 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1337,8 +1337,6 @@ config RTC_DRV_IMXDI
config RTC_DRV_FSL_FTM_ALARM
tristate "Freescale FlexTimer alarm timer"
depends on ARCH_LAYERSCAPE || SOC_LS1021A
- select FSL_RCPM
- default y
help
For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
LS1088A, LS208xA, we can use FTM as the wakeup source.
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
2019-11-08 22:40 [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig Li Yang
@ 2019-11-08 22:40 ` Li Yang
2019-11-15 13:01 ` Alexandre Belloni
1 sibling, 0 replies; 3+ messages in thread
From: Li Yang @ 2019-11-08 22:40 UTC (permalink / raw)
To: Alexandre Belloni, YueHaibing
Cc: linuxppc-dev, linux-arm-kernel, lkml, Biwen Li, Li Yang
The Flextimer alarm is primarily used as a wakeup source for system
power management. But it shouldn't select the power management driver
as they don't really have dependency of each other.
Also remove the default y as it is not a critical feature for the
systems.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
drivers/rtc/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 1adf9f815652..b33b80243143 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1337,8 +1337,6 @@ config RTC_DRV_IMXDI
config RTC_DRV_FSL_FTM_ALARM
tristate "Freescale FlexTimer alarm timer"
depends on ARCH_LAYERSCAPE || SOC_LS1021A
- select FSL_RCPM
- default y
help
For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
LS1088A, LS208xA, we can use FTM as the wakeup source.
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
2019-11-08 22:40 [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig Li Yang
2019-11-08 22:40 ` Li Yang
@ 2019-11-15 13:01 ` Alexandre Belloni
1 sibling, 0 replies; 3+ messages in thread
From: Alexandre Belloni @ 2019-11-15 13:01 UTC (permalink / raw)
To: Li Yang; +Cc: linuxppc-dev, YueHaibing, lkml, linux-arm-kernel, Biwen Li
On 08/11/2019 16:40:56-0600, Li Yang wrote:
> The Flextimer alarm is primarily used as a wakeup source for system
> power management. But it shouldn't select the power management driver
> as they don't really have dependency of each other.
>
> Also remove the default y as it is not a critical feature for the
> systems.
>
> Signed-off-by: Li Yang <leoyang.li@nxp.com>
> ---
> drivers/rtc/Kconfig | 2 --
> 1 file changed, 2 deletions(-)
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-11-15 13:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-08 22:40 [PATCH] rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig Li Yang
2019-11-08 22:40 ` Li Yang
2019-11-15 13:01 ` Alexandre Belloni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).