LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
To: mpe@ellerman.id.au
Cc: mikey@neuling.org, maddy@linux.vnet.ibm.com,
	linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 05/10] powerpc/perf: Update Power PMU cache_events to u64 type
Date: Wed,  1 Jul 2020 05:20:57 -0400
Message-ID: <1593595262-1433-6-git-send-email-atrajeev@linux.vnet.ibm.com> (raw)
In-Reply-To: <1593595262-1433-1-git-send-email-atrajeev@linux.vnet.ibm.com>

Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];

where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.

So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.

Signed-off-by: Athira Rajeev<atrajeev@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/perf_event_server.h | 2 +-
 arch/powerpc/perf/core-book3s.c              | 2 +-
 arch/powerpc/perf/generic-compat-pmu.c       | 2 +-
 arch/powerpc/perf/mpc7450-pmu.c              | 2 +-
 arch/powerpc/perf/power5+-pmu.c              | 2 +-
 arch/powerpc/perf/power5-pmu.c               | 2 +-
 arch/powerpc/perf/power6-pmu.c               | 2 +-
 arch/powerpc/perf/power7-pmu.c               | 2 +-
 arch/powerpc/perf/power8-pmu.c               | 2 +-
 arch/powerpc/perf/power9-pmu.c               | 2 +-
 arch/powerpc/perf/ppc970-pmu.c               | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 895aeaa..cb207f8 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -47,7 +47,7 @@ struct power_pmu {
 	const struct attribute_group	**attr_groups;
 	int		n_generic;
 	int		*generic_events;
-	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+	u64		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
 			       [PERF_COUNT_HW_CACHE_OP_MAX]
 			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
 
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 5c64bd3..58bfb9a 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1820,7 +1820,7 @@ static void hw_perf_event_destroy(struct perf_event *event)
 static int hw_perf_cache_event(u64 config, u64 *eventp)
 {
 	unsigned long type, op, result;
-	int ev;
+	u64 ev;
 
 	if (!ppmu->cache_events)
 		return -EINVAL;
diff --git a/arch/powerpc/perf/generic-compat-pmu.c b/arch/powerpc/perf/generic-compat-pmu.c
index 5e5a54d..eb8a6aaf 100644
--- a/arch/powerpc/perf/generic-compat-pmu.c
+++ b/arch/powerpc/perf/generic-compat-pmu.c
@@ -101,7 +101,7 @@ enum {
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[ C(L1D) ] = {
 		[ C(OP_READ) ] = {
 			[ C(RESULT_ACCESS) ] = 0,
diff --git a/arch/powerpc/perf/mpc7450-pmu.c b/arch/powerpc/perf/mpc7450-pmu.c
index 4d5ef92..cf1eb89 100644
--- a/arch/powerpc/perf/mpc7450-pmu.c
+++ b/arch/powerpc/perf/mpc7450-pmu.c
@@ -354,7 +354,7 @@ static void mpc7450_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0,		0x225	},
 		[C(OP_WRITE)] = {	0,		0x227	},
diff --git a/arch/powerpc/perf/power5+-pmu.c b/arch/powerpc/perf/power5+-pmu.c
index f857454..9252281 100644
--- a/arch/powerpc/perf/power5+-pmu.c
+++ b/arch/powerpc/perf/power5+-pmu.c
@@ -618,7 +618,7 @@ static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0x1c10a8,	0x3c1088	},
 		[C(OP_WRITE)] = {	0x2c10a8,	0xc10c3		},
diff --git a/arch/powerpc/perf/power5-pmu.c b/arch/powerpc/perf/power5-pmu.c
index da52eca..3b36630 100644
--- a/arch/powerpc/perf/power5-pmu.c
+++ b/arch/powerpc/perf/power5-pmu.c
@@ -560,7 +560,7 @@ static void power5_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0x4c1090,	0x3c1088	},
 		[C(OP_WRITE)] = {	0x3c1090,	0xc10c3		},
diff --git a/arch/powerpc/perf/power6-pmu.c b/arch/powerpc/perf/power6-pmu.c
index 3929cac..540b78d 100644
--- a/arch/powerpc/perf/power6-pmu.c
+++ b/arch/powerpc/perf/power6-pmu.c
@@ -481,7 +481,7 @@ static void p6_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * are event codes.
  * The "DTLB" and "ITLB" events relate to the DERAT and IERAT.
  */
-static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0x280030,	0x80080		},
 		[C(OP_WRITE)] = {	0x180032,	0x80088		},
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index a137813..2b7f375 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -332,7 +332,7 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0xc880,		0x400f0	},
 		[C(OP_WRITE)] = {	0,		0x300f0	},
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 3a5fcc2..5282e84 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -253,7 +253,7 @@ static void power8_config_bhrb(u64 pmu_bhrb_filter)
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[ C(L1D) ] = {
 		[ C(OP_READ) ] = {
 			[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index 08c3ef7..05dae38 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -310,7 +310,7 @@ static void power9_config_bhrb(u64 pmu_bhrb_filter)
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[ C(L1D) ] = {
 		[ C(OP_READ) ] = {
 			[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
diff --git a/arch/powerpc/perf/ppc970-pmu.c b/arch/powerpc/perf/ppc970-pmu.c
index 4035d93..2970d1e 100644
--- a/arch/powerpc/perf/ppc970-pmu.c
+++ b/arch/powerpc/perf/ppc970-pmu.c
@@ -432,7 +432,7 @@ static void p970_disable_pmc(unsigned int pmc, unsigned long mmcr[])
  * 0 means not supported, -1 means nonsensical, other values
  * are event codes.
  */
-static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
 		[C(OP_READ)] = {	0x8810,		0x3810	},
 		[C(OP_WRITE)] = {	0x7810,		0x813	},
-- 
1.8.3.1


  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  9:20 [PATCH v2 00/10] powerpc/perf: Add support for power10 PMU Hardware Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 01/10] powerpc/perf: Add support for ISA3.1 PMU SPRs Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 02/10] KVM: PPC: Book3S HV: Save/restore new PMU registers Athira Rajeev
2020-07-01 11:11   ` Paul Mackerras
2020-07-02  6:22     ` Athira Rajeev
2020-07-07  6:13   ` Michael Neuling
2020-07-01  9:20 ` [PATCH v2 03/10] powerpc/xmon: Add PowerISA v3.1 PMU SPRs Athira Rajeev
2020-07-01  9:20 ` [PATCH v2 04/10] powerpc/perf: Add power10_feat to dt_cpu_ftrs Athira Rajeev
2020-07-07  6:22   ` Michael Neuling
2020-07-01  9:20 ` Athira Rajeev [this message]
2020-07-01  9:20 ` [PATCH v2 06/10] powerpc/perf: power10 Performance Monitoring support Athira Rajeev
2020-07-02  9:06   ` kernel test robot
2020-07-07  6:50   ` Michael Neuling
2020-07-01  9:20 ` [PATCH v2 07/10] powerpc/perf: support BHRB disable bit and new filtering modes Athira Rajeev
2020-07-07  7:17   ` Michael Neuling
2020-07-01  9:21 ` [PATCH v2 08/10] powerpc/perf: Add support for outputting extended regs in perf intr_regs Athira Rajeev
2020-07-01  9:21 ` [PATCH v2 09/10] tools/perf: Add perf tools support for extended register capability in powerpc Athira Rajeev
2020-07-01  9:21 ` [PATCH v2 10/10] powerpc/perf: Add extended regs support for power10 platform Athira Rajeev
2020-07-02  9:40   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593595262-1433-6-git-send-email-atrajeev@linux.vnet.ibm.com \
    --to=atrajeev@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git