LinuxPPC-Dev Archive on
 help / color / Atom feed
From: "Michal Suchánek" <>
To: Hari Bathini <>
Cc: Mahesh Salgaonkar <>,,,
	Paul Mackerras <>
Subject: Re: [PATCH] powerpc/fadump: Remove duplicate message.
Date: Thu, 24 Oct 2019 13:16:51 +0200
Message-ID: <> (raw)
In-Reply-To: <>

On Thu, Oct 24, 2019 at 04:08:08PM +0530, Hari Bathini wrote:
> Michal, thanks for looking into this.
> On 23/10/19 11:26 PM, Michal Suchanek wrote:
> > There is duplicate message about lack of support by firmware in
> > fadump_reserve_mem and setup_fadump. Due to different capitalization it
> > is clear that the one in setup_fadump is shown on boot. Remove the
> > duplicate that is not shown.
> Actually, the message in fadump_reserve_mem() is logged. fadump_reserve_mem()
> executes first and sets fw_dump.fadump_enabled to `0`, if fadump is not supported.
> So, the other message in setup_fadump() doesn't get logged anymore with recent
> changes. The right thing to do would be to remove similar message in setup_fadump() instead.

I need to re-check with a recent kernel build. I saw the message from
setup_fadump and not the one from fadump_reserve_mem but not sure what
the platform init code looked like in the kernel I tested with.



  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23  7:54 [PATCH v2 rebased] powerpc/fadump: when fadump is supported register the fadump sysfs files Michal Suchanek
2019-10-23 17:56 ` [PATCH] powerpc/fadump: Remove duplicate message Michal Suchanek
2019-10-24 10:38   ` Hari Bathini
2019-10-24 11:16     ` Michal Suchánek [this message]
2019-11-07 16:42       ` Michal Suchánek
2019-11-07 16:47   ` [PATCH v3] powerpc/fadump: when fadump is supported register the fadump sysfs files Michal Suchanek
2019-11-08 11:38     ` Hari Bathini
2019-11-14  9:08     ` Michael Ellerman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on

Archives are clonable:
	git clone --mirror linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ \
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone