LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events
@ 2020-02-14 11:03 Kajol Jain
  2020-02-14 11:03 ` [PATCH 1/8] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run Kajol Jain
                   ` (7 more replies)
  0 siblings, 8 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

The hv_24×7 feature in IBM® POWER9™ processor-based servers provide the
facility to continuously collect large numbers of hardware performance
metrics efficiently and accurately.

First patch of the patchset fix inconsistent results we are getting when
we run multiple 24x7 events.

Patchset adds json file metric support for the hv_24x7 socket/chip level
events. "hv_24x7" pmu interface events needs system dependent parameter
like socket/chip/core. For example, hv_24x7 chip level events needs
specific chip-id to which the data is requested should be added as part
of pmu events.

So to enable JSON file support to "hv_24x7" interface, patchset expose
total number of sockets and chips per-socket details in sysfs
files (sockets, chips) under "/sys/devices/hv_24x7/interface/".

To get sockets and number of chips per sockets, patchset adds a rtas call
with token "PROCESSOR_MODULE_INFO" to get these details. Patchset also
handles partition migration case to re-init these system depended
parameters by adding proper calls in post_mobility_fixup() (mobility.c).

Patch 6 & 8 of the patchset handles perf tool plumbing needed to replace
the "?" character in the metric expression to proper value and hv_24x7
json metric file for different Socket/chip resources.

Patch set also enable Hz/hz prinitg for --metric-only option to print
metric data for bus frequency.

Kajol Jain (8):
  powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple
    hv-24x7 events run
  powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor
    details
  powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show
    processor details
  Documentation/ABI: Add ABI documentation for chips and sockets
  powerpc/hv-24x7: Update post_mobility_fixup() to handle migration
  perf/tools: Enhance JSON/metric infrastructure to handle "?"
  tools/perf: Enable Hz/hz prinitg for --metric-only option
  perf/tools/pmu-events/powerpc: Add hv_24x7 socket/chip level metric
    events

 .../sysfs-bus-event_source-devices-hv_24x7    |  14 +++
 arch/powerpc/perf/hv-24x7.c                   |  96 ++++++++++++++-
 arch/powerpc/platforms/pseries/mobility.c     |  12 ++
 arch/powerpc/platforms/pseries/pseries.h      |   3 +
 tools/perf/arch/powerpc/util/header.c         |  40 +++++++
 .../arch/powerpc/power9/hv_24x7_metrics.json  |  19 +++
 tools/perf/util/expr.h                        |   1 +
 tools/perf/util/expr.y                        |  17 ++-
 tools/perf/util/metricgroup.c                 | 112 +++++++++++-------
 tools/perf/util/metricgroup.h                 |   1 +
 tools/perf/util/stat-display.c                |   2 -
 tools/perf/util/stat-shadow.c                 |   5 +
 12 files changed, 277 insertions(+), 45 deletions(-)
 create mode 100644 tools/perf/pmu-events/arch/powerpc/power9/hv_24x7_metrics.json

-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 1/8] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 2/8] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details Kajol Jain
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.

For example:

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
			   hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
	  		   -C 0 -I 1000 sleep 100

     1.000121704                120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000121704                  5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000357733                  8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000357733                 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000641884                 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Getting these large values in case we do -I.

As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.

This patch rather then setting event_count to 0, it change local64_set to
local64_add in function 'h_24x7_event_read'.

With this patch
In power9 platform

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
		           hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
			   -C 0 -I 1000 sleep 100

     1.000117685                 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000117685                  1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000349331                 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000349331                  2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495900                131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495900                  4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000645920                204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000645920                 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.284169997                 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/perf/hv-24x7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 573e0b309c0c..6dbbf70232aa 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -1409,7 +1409,7 @@ static void h_24x7_event_read(struct perf_event *event)
 			 * that would require issuing a hcall, which would then
 			 * defeat the purpose of using the txn interface.
 			 */
-			local64_set(&event->count, 0);
+			local64_add(0, &event->count);
 		}
 
 		put_cpu_var(hv_24x7_reqb);
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 2/8] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
  2020-02-14 11:03 ` [PATCH 1/8] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 3/8] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show " Kajol Jain
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

For hv_24x7 socket/chip level events, specific chip-id to which
the data requested should be added as part of pmu events.
But number of chips/socket in the system details are not exposed.

Patch implements read_sys_info_pseries() to get system
parameter values like number of sockets and chips per socket.
Rtas_call with token "PROCESSOR_MODULE_INFO"
is used to get these values.

Sub-sequent patch exports these values via sysfs.

Patch also make these parameters default to 1.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/perf/hv-24x7.c              | 72 ++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/pseries.h |  3 +
 2 files changed, 75 insertions(+)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 6dbbf70232aa..4248a9d1e2ed 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -20,6 +20,11 @@
 #include <asm/io.h>
 #include <linux/byteorder/generic.h>
 
+#ifdef CONFIG_PPC_RTAS
+#include <asm/rtas.h>
+#include <../../platforms/pseries/pseries.h>
+#endif
+
 #include "hv-24x7.h"
 #include "hv-24x7-catalog.h"
 #include "hv-common.h"
@@ -57,6 +62,69 @@ static bool is_physical_domain(unsigned domain)
 	}
 }
 
+#ifdef CONFIG_PPC_RTAS
+#define PROCESSOR_MODULE_INFO   43
+#define PROCESSOR_MAX_LENGTH	(8 * 1024)
+
+static int strbe16toh(const char *buf, int offset)
+{
+	return (buf[offset] << 8) + buf[offset + 1];
+}
+
+static u32		physsockets;	/* Physical sockets */
+static u32		physchips;	/* Physical chips */
+
+/*
+ * Function read_sys_info_pseries() make a rtas_call which require
+ * data buffer of size 8K. As standard 'rtas_data_buf' is of size
+ * 4K, we are adding new local buffer 'rtas_local_data_buf'.
+ */
+char rtas_local_data_buf[PROCESSOR_MAX_LENGTH] __cacheline_aligned;
+
+/*
+ * read_sys_info_pseries()
+ * Retrieve the number of sockets and chips per socket details
+ * through the get-system-parameter rtas call.
+ */
+void read_sys_info_pseries(void)
+{
+	int call_status, len, ntypes;
+
+	/*
+	 * Making system parameter: chips and sockets default to 1.
+	 */
+	physsockets = 1;
+	physchips = 1;
+	memset(rtas_local_data_buf, 0, PROCESSOR_MAX_LENGTH);
+	spin_lock(&rtas_data_buf_lock);
+
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				PROCESSOR_MODULE_INFO,
+				__pa(rtas_local_data_buf),
+				PROCESSOR_MAX_LENGTH);
+
+	spin_unlock(&rtas_data_buf_lock);
+
+	if (call_status != 0) {
+		pr_info("%s %s Error calling get-system-parameter (0x%x)\n",
+			__FILE__, __func__, call_status);
+	} else {
+		rtas_local_data_buf[PROCESSOR_MAX_LENGTH - 1] = '\0';
+		len = strbe16toh(rtas_local_data_buf, 0);
+		if (len < 6)
+			return;
+
+		ntypes = strbe16toh(rtas_local_data_buf, 2);
+
+		if (!ntypes)
+			return;
+		physsockets = strbe16toh(rtas_local_data_buf, 4);
+		physchips = strbe16toh(rtas_local_data_buf, 6);
+	}
+}
+#endif /* CONFIG_PPC_RTAS */
+
 /* Domains for which more than one result element are returned for each event. */
 static bool domain_needs_aggregation(unsigned int domain)
 {
@@ -1615,6 +1683,10 @@ static int hv_24x7_init(void)
 	if (r)
 		return r;
 
+#ifdef CONFIG_PPC_RTAS
+	read_sys_info_pseries();
+#endif
+
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 13fa370a87e4..1727559ce304 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -19,6 +19,9 @@ extern void request_event_sources_irqs(struct device_node *np,
 struct pt_regs;
 
 extern int pSeries_system_reset_exception(struct pt_regs *regs);
+#ifdef CONFIG_PPC_RTAS
+extern void read_sys_info_pseries(void);
+#endif
 extern int pSeries_machine_check_exception(struct pt_regs *regs);
 extern long pseries_machine_check_realmode(struct pt_regs *regs);
 
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 3/8] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show processor details
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
  2020-02-14 11:03 ` [PATCH 1/8] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run Kajol Jain
  2020-02-14 11:03 ` [PATCH 2/8] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details Kajol Jain
@ 2020-02-14 11:03 ` " Kajol Jain
  2020-02-14 11:03 ` [PATCH 4/8] Documentation/ABI: Add ABI documentation for chips and sockets Kajol Jain
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

To expose the system dependent parameter like total number of
sockets and numbers of chips per socket, patch adds two sysfs files.
"sockets" and "chips" are added to /sys/devices/hv_24x7/interface/
of the "hv_24x7" pmu.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/perf/hv-24x7.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 4248a9d1e2ed..9e486ec7269f 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -454,6 +454,20 @@ static ssize_t device_show_string(struct device *dev,
 	return sprintf(buf, "%s\n", (char *)d->var);
 }
 
+#ifdef CONFIG_PPC_RTAS
+static ssize_t sockets_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", physsockets);
+}
+
+static ssize_t chips_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	return sprintf(buf, "%d\n", physchips);
+}
+#endif
+
 static struct attribute *device_str_attr_create_(char *name, char *str)
 {
 	struct dev_ext_attribute *attr = kzalloc(sizeof(*attr), GFP_KERNEL);
@@ -1100,6 +1114,10 @@ PAGE_0_ATTR(catalog_len, "%lld\n",
 		(unsigned long long)be32_to_cpu(page_0->length) * 4096);
 static BIN_ATTR_RO(catalog, 0/* real length varies */);
 static DEVICE_ATTR_RO(domains);
+#ifdef CONFIG_PPC_RTAS
+static DEVICE_ATTR_RO(sockets);
+static DEVICE_ATTR_RO(chips);
+#endif
 
 static struct bin_attribute *if_bin_attrs[] = {
 	&bin_attr_catalog,
@@ -1110,6 +1128,10 @@ static struct attribute *if_attrs[] = {
 	&dev_attr_catalog_len.attr,
 	&dev_attr_catalog_version.attr,
 	&dev_attr_domains.attr,
+#ifdef CONFIG_PPC_RTAS
+	&dev_attr_sockets.attr,
+	&dev_attr_chips.attr,
+#endif
 	NULL,
 };
 
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 4/8] Documentation/ABI: Add ABI documentation for chips and sockets
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
                   ` (2 preceding siblings ...)
  2020-02-14 11:03 ` [PATCH 3/8] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show " Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 5/8] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration Kajol Jain
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

Add documentation for the following sysfs files:
/sys/devices/hv_24x7/interface/chips,
/sys/devices/hv_24x7/interface/sockets

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 .../testing/sysfs-bus-event_source-devices-hv_24x7 | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
index ec27c6c9e737..e26cb1770c61 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -22,6 +22,20 @@ Description:
 		Exposes the "version" field of the 24x7 catalog. This is also
 		extractable from the provided binary "catalog" sysfs entry.
 
+What:		/sys/devices/hv_24x7/interface/sockets
+Date:		December 2019
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:	read only
+		This sysfs interface exposes the number of sockets present in the
+		system.
+
+What:		/sys/devices/hv_24x7/interface/chips
+Date:		December 2019
+Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
+Description:	read only
+		This sysfs interface exposes the number of chips per socket
+		present in the system.
+
 What:		/sys/bus/event_source/devices/hv_24x7/event_descs/<event-name>
 Date:		February 2014
 Contact:	Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 5/8] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
                   ` (3 preceding siblings ...)
  2020-02-14 11:03 ` [PATCH 4/8] Documentation/ABI: Add ABI documentation for chips and sockets Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 6/8] perf/tools: Enhance JSON/metric infrastructure to handle "?" Kajol Jain
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

Function 'read_sys_info_pseries()' is added to get system parameter
values like number of sockets and chips per socket.
and it gets these details via rtas_call with token
"PROCESSOR_MODULE_INFO".

Incase lpar migrate from one system to another, system
parameter details like chips per sockets or number of sockets might
change. So, it needs to be re-initialized otherwise, these values
corresponds to previous system values.
This patch adds a call to 'read_sys_info_pseries()' from
'post-mobility_fixup()' to re-init the physsockets and physchips values.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 arch/powerpc/platforms/pseries/mobility.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index b571285f6c14..226accd6218b 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -371,6 +371,18 @@ void post_mobility_fixup(void)
 	/* Possibly switch to a new RFI flush type */
 	pseries_setup_rfi_flush();
 
+	/*
+	 * Incase lpar migrate from one system to another, system
+	 * parameter details like chips per sockets and number of sockets
+	 * might change. So, it needs to be re-initialized otherwise these
+	 * values corresponds to previous system.
+	 * Here, adding a call to read_sys_info_pseries() declared in
+	 * platforms/pseries/pseries.h to re-init the physsockets and
+	 * physchips value.
+	 */
+	if (IS_ENABLED(CONFIG_HV_PERF_CTRS) && IS_ENABLED(CONFIG_PPC_RTAS))
+		read_sys_info_pseries();
+
 	return;
 }
 
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 6/8] perf/tools: Enhance JSON/metric infrastructure to handle "?"
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
                   ` (4 preceding siblings ...)
  2020-02-14 11:03 ` [PATCH 5/8] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 7/8] tools/perf: Enable Hz/hz prinitg for --metric-only option Kajol Jain
  2020-02-14 11:03 ` [PATCH 8/8] perf/tools/pmu-events/powerpc: Add hv_24x7 socket/chip level metric events Kajol Jain
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

Patch enhances current metric infrastructure to handle "?" in the metric
expression. The "?" can be use for parameters whose value not known while
creating metric events and which can be replace later at runtime to
the proper value. It also add flexibility to create multiple events out
of single metric event added in json file.

Patch adds function 'arch_get_runtimeparam' which is a arch specific
function, returns the count of metric events need to be created.
By default it return 1.

One loop is added in function 'metricgroup__add_metric', which create
multiple events at run time depend on return value of
'arch_get_runtimeparam' and merge that event in 'group_list'.

This infrastructure needed for hv_24x7 socket/chip level events.
"hv_24x7" chip level events needs specific chip-id to which the
data is requested. Function 'arch_get_runtimeparam' implemented
in header.c which extract number of sockets from sysfs file
"sockets" under "/sys/devices/hv_24x7/interface/".

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 tools/perf/arch/powerpc/util/header.c |  40 +++++++++
 tools/perf/util/expr.h                |   1 +
 tools/perf/util/expr.y                |  17 +++-
 tools/perf/util/metricgroup.c         | 112 ++++++++++++++++----------
 tools/perf/util/metricgroup.h         |   1 +
 tools/perf/util/stat-shadow.c         |   5 ++
 6 files changed, 134 insertions(+), 42 deletions(-)

diff --git a/tools/perf/arch/powerpc/util/header.c b/tools/perf/arch/powerpc/util/header.c
index 3b4cdfc5efd6..28425edb901c 100644
--- a/tools/perf/arch/powerpc/util/header.c
+++ b/tools/perf/arch/powerpc/util/header.c
@@ -7,6 +7,11 @@
 #include <string.h>
 #include <linux/stringify.h>
 #include "header.h"
+#include "metricgroup.h"
+#include "evlist.h"
+#include <dirent.h>
+#include "pmu.h"
+#include <api/fs/fs.h>
 
 #define mfspr(rn)       ({unsigned long rval; \
 			 asm volatile("mfspr %0," __stringify(rn) \
@@ -16,6 +21,8 @@
 #define PVR_VER(pvr)    (((pvr) >>  16) & 0xFFFF) /* Version field */
 #define PVR_REV(pvr)    (((pvr) >>   0) & 0xFFFF) /* Revison field */
 
+#define SOCKETS_INFO_FILE_PATH "/devices/hv_24x7/interface/"
+
 int
 get_cpuid(char *buffer, size_t sz)
 {
@@ -44,3 +51,36 @@ get_cpuid_str(struct perf_pmu *pmu __maybe_unused)
 
 	return bufp;
 }
+
+int arch_get_runtimeparam(void)
+{
+	int count = 0;
+	DIR *dir;
+	char path[PATH_MAX];
+	const char *sysfs = sysfs__mountpoint();
+	char filename[] = "sockets";
+	FILE *file;
+	char buf[16], *num;
+	int data;
+
+	if (!sysfs)
+		goto out;
+	snprintf(path, PATH_MAX,
+		 "%s" SOCKETS_INFO_FILE_PATH, sysfs);
+	dir = opendir(path);
+	if (!dir)
+		goto out;
+	strcat(path, filename);
+	file = fopen(path, "r");
+	if (!file)
+		goto out;
+
+	data = fread(buf, 1, sizeof(buf), file);
+	if (data == 0)
+		goto out;
+	count = strtol(buf, &num, 10);
+out:
+	if (!count)
+		count = 1;
+	return count;
+}
diff --git a/tools/perf/util/expr.h b/tools/perf/util/expr.h
index 046160831f90..85ebea68b0c5 100644
--- a/tools/perf/util/expr.h
+++ b/tools/perf/util/expr.h
@@ -15,6 +15,7 @@ struct parse_ctx {
 	struct parse_id ids[MAX_PARSE_ID];
 };
 
+extern int expr__runtimeparam;
 void expr__ctx_init(struct parse_ctx *ctx);
 void expr__add_id(struct parse_ctx *ctx, const char *id, double val);
 #ifndef IN_EXPR_Y
diff --git a/tools/perf/util/expr.y b/tools/perf/util/expr.y
index 7d226241f1d7..8d1d51451873 100644
--- a/tools/perf/util/expr.y
+++ b/tools/perf/util/expr.y
@@ -37,6 +37,8 @@
 %type <num> expr if_expr
 
 %{
+int expr__runtimeparam;
+
 static int expr__lex(YYSTYPE *res, const char **pp);
 
 static void expr__error(double *final_val __maybe_unused,
@@ -102,7 +104,7 @@ static int expr__symbol(YYSTYPE *res, const char *p, const char **pp)
 	if (*p == '#')
 		*dst++ = *p++;
 
-	while (isalnum(*p) || *p == '_' || *p == '.' || *p == ':' || *p == '@' || *p == '\\') {
+	while (isalnum(*p) || *p == '_' || *p == '.' || *p == ':' || *p == '@' || *p == '\\' || *p == '?') {
 		if (p - s >= MAXIDLEN)
 			return -1;
 		/*
@@ -113,6 +115,19 @@ static int expr__symbol(YYSTYPE *res, const char *p, const char **pp)
 			*dst++ = '/';
 		else if (*p == '\\')
 			*dst++ = *++p;
+		else if (*p == '?') {
+			int size = snprintf(NULL, 0, "%d", expr__runtimeparam);
+			char * paramval = (char *)malloc(size);
+			int i = 0;
+			if(!paramval)
+				*dst++ = '0';
+			else {
+				sprintf(paramval, "%d", expr__runtimeparam);
+				while(i < size)
+					*dst++ = paramval[i++];
+				free(paramval);
+			}
+		}
 		else
 			*dst++ = *p;
 		p++;
diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index 02aee946b6c1..f629828cc0de 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -399,6 +399,11 @@ void metricgroup__print(bool metrics, bool metricgroups, char *filter,
 	strlist__delete(metriclist);
 }
 
+int __weak arch_get_runtimeparam(void)
+{
+	return 1;
+}
+
 static int metricgroup__add_metric(const char *metric, struct strbuf *events,
 				   struct list_head *group_list)
 {
@@ -419,52 +424,77 @@ static int metricgroup__add_metric(const char *metric, struct strbuf *events,
 			continue;
 		if (match_metric(pe->metric_group, metric) ||
 		    match_metric(pe->metric_name, metric)) {
-			const char **ids;
-			int idnum;
-			struct egroup *eg;
-			bool no_group = false;
+			int k, count;
+
+			if (strstr(pe->metric_expr, "?"))
+				count = arch_get_runtimeparam();
+			else
+				count = 1;
+
+			/* This loop is added to create multiple
+			 * events depend on count value and add
+			 * those events to group_list.
+			 */
+			for (k = 0; k < count; k++) {
+				const char **ids;
+				int idnum;
+				struct egroup *eg;
+				bool no_group = false;
+				char value[PATH_MAX];
+
+				pr_debug("metric expr %s for %s\n",
+					 pe->metric_expr, pe->metric_name);
+				expr__runtimeparam = k;
+				if (expr__find_other(pe->metric_expr, NULL,
+						     &ids, &idnum) < 0)
+					continue;
+				if (events->len > 0)
+					strbuf_addf(events, ",");
+				for (j = 0; j < idnum; j++) {
+					pr_debug("found event %s\n", ids[j]);
+					/*
+					 * Duration time maps to a software
+					 * event and can make groups not count.
+					 * Always use it outside a group.
+					 */
+					if (!strcmp(ids[j], "duration_time")) {
+						if (j > 0)
+							strbuf_addf(events,
+								    "}:W,");
+						strbuf_addf(events,
+							    "duration_time");
+						no_group = true;
+						continue;
+					}
+					strbuf_addf(events, "%s%s",
+						    j == 0 || no_group ? "{" :
+						    ",", ids[j]);
+					no_group = false;
+				}
+				if (!no_group)
+					strbuf_addf(events, "}:W");
 
-			pr_debug("metric expr %s for %s\n", pe->metric_expr, pe->metric_name);
+				eg = malloc(sizeof(struct egroup));
+				if (!eg) {
+					ret = -ENOMEM;
+					break;
+				}
+				eg->ids = ids;
+				eg->idnum = idnum;
 
-			if (expr__find_other(pe->metric_expr,
-					     NULL, &ids, &idnum) < 0)
-				continue;
-			if (events->len > 0)
-				strbuf_addf(events, ",");
-			for (j = 0; j < idnum; j++) {
-				pr_debug("found event %s\n", ids[j]);
-				/*
-				 * Duration time maps to a software event and can make
-				 * groups not count. Always use it outside a
-				 * group.
-				 */
-				if (!strcmp(ids[j], "duration_time")) {
-					if (j > 0)
-						strbuf_addf(events, "}:W,");
-					strbuf_addf(events, "duration_time");
-					no_group = true;
-					continue;
+				if (strstr(pe->metric_expr, "?")) {
+					sprintf(value, "%s%c%d",
+						pe->metric_name, '_', k);
+				} else {
+					strcpy(value, pe->metric_name);
 				}
-				strbuf_addf(events, "%s%s",
-					j == 0 || no_group ? "{" : ",",
-					ids[j]);
-				no_group = false;
-			}
-			if (!no_group)
-				strbuf_addf(events, "}:W");
 
-			eg = malloc(sizeof(struct egroup));
-			if (!eg) {
-				ret = -ENOMEM;
-				break;
+				eg->metric_name = strdup(value);
+				eg->metric_expr = pe->metric_expr;
+				eg->metric_unit = pe->unit;
+				list_add_tail(&eg->nd, group_list);
+				ret = 0;
 			}
-			eg->ids = ids;
-			eg->idnum = idnum;
-			eg->metric_name = pe->metric_name;
-			eg->metric_expr = pe->metric_expr;
-			eg->metric_unit = pe->unit;
-			list_add_tail(&eg->nd, group_list);
-			ret = 0;
 		}
 	}
 	return ret;
diff --git a/tools/perf/util/metricgroup.h b/tools/perf/util/metricgroup.h
index 475c7f912864..81224ba1270d 100644
--- a/tools/perf/util/metricgroup.h
+++ b/tools/perf/util/metricgroup.h
@@ -34,4 +34,5 @@ int metricgroup__parse_groups(const struct option *opt,
 void metricgroup__print(bool metrics, bool groups, char *filter,
 			bool raw, bool details);
 bool metricgroup__has_metric(const char *metric);
+int arch_get_runtimeparam(void);
 #endif
diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index 2c41d47f6f83..147a39b1ff5b 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -780,7 +780,12 @@ static void generic_metric(struct perf_stat_config *config,
 
 	if (!metric_events[i]) {
 		const char *p = metric_expr;
+		if (strstr(p, "?")) {
+			char *tmp = strrchr(metric_name, '_');
 
+			tmp++;
+			expr__runtimeparam = strtol(tmp, &tmp, 10);
+		}
 		if (expr__parse(&ratio, &pctx, &p) == 0) {
 			char *unit;
 			char metric_bf[64];
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 7/8] tools/perf: Enable Hz/hz prinitg for --metric-only option
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
                   ` (5 preceding siblings ...)
  2020-02-14 11:03 ` [PATCH 6/8] perf/tools: Enhance JSON/metric infrastructure to handle "?" Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  2020-02-14 11:03 ` [PATCH 8/8] perf/tools/pmu-events/powerpc: Add hv_24x7 socket/chip level metric events Kajol Jain
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

Commit 54b5091606c18 ("perf stat: Implement --metric-only mode")
added function 'valid_only_metric()' which drops "Hz" or "hz",
if it is part of "ScaleUnit". This patch enable it since hv_24x7
supports couple of frequency events.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 tools/perf/util/stat-display.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index bc31fccc0057..22dcdfbb9e10 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -236,8 +236,6 @@ static bool valid_only_metric(const char *unit)
 	if (!unit)
 		return false;
 	if (strstr(unit, "/sec") ||
-	    strstr(unit, "hz") ||
-	    strstr(unit, "Hz") ||
 	    strstr(unit, "CPUs utilized"))
 		return false;
 	return true;
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 8/8] perf/tools/pmu-events/powerpc: Add hv_24x7 socket/chip level metric events
  2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
                   ` (6 preceding siblings ...)
  2020-02-14 11:03 ` [PATCH 7/8] tools/perf: Enable Hz/hz prinitg for --metric-only option Kajol Jain
@ 2020-02-14 11:03 ` Kajol Jain
  7 siblings, 0 replies; 9+ messages in thread
From: Kajol Jain @ 2020-02-14 11:03 UTC (permalink / raw)
  To: acme, linuxppc-dev
  Cc: ravi.bangoria, maddy, jmario, mpetlan, peterz, gregkh,
	linux-kernel, alexander.shishkin, linux-perf-users, ak, yao.jin,
	anju, kjain, jolsa, namhyung, mingo, kan.liang

The hv_24×7 feature in IBM® POWER9™ processor-based servers provide the
facility to continuously collect large numbers of hardware performance
metrics efficiently and accurately.
This patch adds hv_24x7 json metric file for different Socket/chip
resources.

Result:

power9 platform:

command:# ./perf stat --metric-only -M Memory_RD_BW_Chip -C 0
           -I 1000 sleep 1

time MB       Memory_RD_BW_Chip_0 MB   Memory_RD_BW_Chip_1 MB
1.000192635                      0.4                      0.0
1.001695883                      0.0                      0.0

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
---
 .../arch/powerpc/power9/hv_24x7_metrics.json  | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/powerpc/power9/hv_24x7_metrics.json

diff --git a/tools/perf/pmu-events/arch/powerpc/power9/hv_24x7_metrics.json b/tools/perf/pmu-events/arch/powerpc/power9/hv_24x7_metrics.json
new file mode 100644
index 000000000000..ac38f5540ac6
--- /dev/null
+++ b/tools/perf/pmu-events/arch/powerpc/power9/hv_24x7_metrics.json
@@ -0,0 +1,19 @@
+[
+    {
+        "MetricExpr": "(hv_24x7@PM_MCS01_128B_RD_DISP_PORT01\\,chip\\=?@ + hv_24x7@PM_MCS01_128B_RD_DISP_PORT23\\,chip\\=?@ + hv_24x7@PM_MCS23_128B_RD_DISP_PORT01\\,chip\\=?@ + hv_24x7@PM_MCS23_128B_RD_DISP_PORT23\\,chip\\=?@)",
+        "MetricName": "Memory_RD_BW_Chip",
+        "MetricGroup": "Memory_BW",
+        "ScaleUnit": "1.6e-2MB"
+    },
+    {
+    "MetricExpr": "(hv_24x7@PM_MCS01_128B_WR_DISP_PORT01\\,chip\\=?@ + hv_24x7@PM_MCS01_128B_WR_DISP_PORT23\\,chip\\=?@ + hv_24x7@PM_MCS23_128B_WR_DISP_PORT01\\,chip\\=?@ + hv_24x7@PM_MCS23_128B_WR_DISP_PORT23\\,chip\\=?@ )",
+        "MetricName": "Memory_WR_BW_Chip",
+        "MetricGroup": "Memory_BW",
+        "ScaleUnit": "1.6e-2MB"
+    },
+    {
+    "MetricExpr": "(hv_24x7@PM_PB_CYC\\,chip\\=?@ )",
+        "MetricName": "PowerBUS_Frequency",
+        "ScaleUnit": "2.5e-7GHz"
+    }
+]
-- 
2.18.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14 11:03 [PATCH 0/8] powerpc/perf: Add json file metric support for the hv_24x7 socket/chip level events Kajol Jain
2020-02-14 11:03 ` [PATCH 1/8] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run Kajol Jain
2020-02-14 11:03 ` [PATCH 2/8] powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details Kajol Jain
2020-02-14 11:03 ` [PATCH 3/8] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show " Kajol Jain
2020-02-14 11:03 ` [PATCH 4/8] Documentation/ABI: Add ABI documentation for chips and sockets Kajol Jain
2020-02-14 11:03 ` [PATCH 5/8] powerpc/hv-24x7: Update post_mobility_fixup() to handle migration Kajol Jain
2020-02-14 11:03 ` [PATCH 6/8] perf/tools: Enhance JSON/metric infrastructure to handle "?" Kajol Jain
2020-02-14 11:03 ` [PATCH 7/8] tools/perf: Enable Hz/hz prinitg for --metric-only option Kajol Jain
2020-02-14 11:03 ` [PATCH 8/8] perf/tools/pmu-events/powerpc: Add hv_24x7 socket/chip level metric events Kajol Jain

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git