linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option
Date: Wed, 26 Feb 2020 03:35:22 +1000	[thread overview]
Message-ID: <20200225173541.1549955-14-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>

Replace IEARLY=1 and IEARLY=2 with IBRANCH_COMMON, which controls if
the entry code branches to a common handler; and IREALMODE_COMMON,
which controls whether the common handler should remain in real mode.

These special cases no longer avoid loading the SRR registers, there
is no point as most of them load the registers immediately anyway.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 48 ++++++++++++++--------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb2f6ee4d652..f4f35d01fe00 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -174,7 +174,8 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define IDAR		.L_IDAR_\name\()
 #define IDSISR		.L_IDSISR_\name\()
 #define ISET_RI		.L_ISET_RI_\name\()
-#define IEARLY		.L_IEARLY_\name\()
+#define IBRANCH_TO_COMMON	.L_IBRANCH_TO_COMMON_\name\()
+#define IREALMODE_COMMON	.L_IREALMODE_COMMON_\name\()
 #define IMASK		.L_IMASK_\name\()
 #define IKVM_SKIP	.L_IKVM_SKIP_\name\()
 #define IKVM_REAL	.L_IKVM_REAL_\name\()
@@ -218,8 +219,15 @@ do_define_int n
 	.ifndef ISET_RI
 		ISET_RI=1
 	.endif
-	.ifndef IEARLY
-		IEARLY=0
+	.ifndef IBRANCH_TO_COMMON
+		IBRANCH_TO_COMMON=1
+	.endif
+	.ifndef IREALMODE_COMMON
+		IREALMODE_COMMON=0
+	.else
+		.if ! IBRANCH_TO_COMMON
+			.error "IREALMODE_COMMON=1 but IBRANCH_TO_COMMON=0"
+		.endif
 	.endif
 	.ifndef IMASK
 		IMASK=0
@@ -353,6 +361,11 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
  */
 
 .macro GEN_BRANCH_TO_COMMON name, virt
+	.if IREALMODE_COMMON
+	LOAD_HANDLER(r10, \name\()_common)
+	mtctr	r10
+	bctr
+	.else
 	.if \virt
 #ifndef CONFIG_RELOCATABLE
 	b	\name\()_common_virt
@@ -366,6 +379,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	mtctr	r10
 	bctr
 	.endif
+	.endif
 .endm
 
 .macro GEN_INT_ENTRY name, virt, ool=0
@@ -421,11 +435,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	stw	r10,IAREA+EX_DSISR(r13)
 	.endif
 
-	.if IEARLY == 2
-	/* nothing more */
-	.elseif IEARLY
-	BRANCH_TO_C000(r11, \name\()_common)
-	.else
 	.if IHSRR == EXC_HV_OR_STD
 	BEGIN_FTR_SECTION
 	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
@@ -441,6 +450,8 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	mfspr	r11,SPRN_SRR0		/* save SRR0 */
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 	.endif
+
+	.if IBRANCH_TO_COMMON
 	GEN_BRANCH_TO_COMMON \name \virt
 	.endif
 
@@ -926,6 +937,7 @@ INT_DEFINE_BEGIN(machine_check_early)
 	IVEC=0x200
 	IAREA=PACA_EXMC
 	IVIRT=0 /* no virt entry point */
+	IREALMODE_COMMON=1
 	/*
 	 * MSR_RI is not enabled, because PACA_EXMC is being used, so a
 	 * nested machine check corrupts it. machine_check_common enables
@@ -933,7 +945,6 @@ INT_DEFINE_BEGIN(machine_check_early)
 	 */
 	ISET_RI=0
 	ISTACK=0
-	IEARLY=1
 	IDAR=1
 	IDSISR=1
 	IRECONCILE=0
@@ -973,9 +984,6 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi)
 	EXCEPTION_RESTORE_REGS EXC_STD
 
 EXC_COMMON_BEGIN(machine_check_early_common)
-	mfspr	r11,SPRN_SRR0
-	mfspr	r12,SPRN_SRR1
-
 	/*
 	 * Switch to mc_emergency stack and handle re-entrancy (we limit
 	 * the nested MCE upto level 4 to avoid stack overflow).
@@ -1809,7 +1817,7 @@ EXC_COMMON_BEGIN(emulation_assist_common)
 INT_DEFINE_BEGIN(hmi_exception_early)
 	IVEC=0xe60
 	IHSRR=EXC_HV
-	IEARLY=1
+	IREALMODE_COMMON=1
 	ISTACK=0
 	IRECONCILE=0
 	IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
@@ -1829,8 +1837,6 @@ EXC_REAL_END(hmi_exception, 0xe60, 0x20)
 EXC_VIRT_NONE(0x4e60, 0x20)
 
 EXC_COMMON_BEGIN(hmi_exception_early_common)
-	mfspr	r11,SPRN_HSRR0		/* Save HSRR0 */
-	mfspr	r12,SPRN_HSRR1		/* Save HSRR1 */
 	mr	r10,r1			/* Save r1 */
 	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack for realmode */
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
@@ -2156,29 +2162,23 @@ EXC_VIRT_NONE(0x5400, 0x100)
 INT_DEFINE_BEGIN(denorm_exception)
 	IVEC=0x1500
 	IHSRR=EXC_HV
-	IEARLY=2
+	IBRANCH_TO_COMMON=0
 	IKVM_REAL=1
 INT_DEFINE_END(denorm_exception)
 
 EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100)
 	GEN_INT_ENTRY denorm_exception, virt=0
 #ifdef CONFIG_PPC_DENORMALISATION
-	mfspr	r10,SPRN_HSRR1
-	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	andis.	r10,r12,(HSRR1_DENORM)@h /* denorm? */
 	bne+	denorm_assist
 #endif
-	mfspr	r11,SPRN_HSRR0
-	mfspr	r12,SPRN_HSRR1
 	GEN_BRANCH_TO_COMMON denorm_exception, virt=0
 EXC_REAL_END(denorm_exception, 0x1500, 0x100)
 #ifdef CONFIG_PPC_DENORMALISATION
 EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100)
 	GEN_INT_ENTRY denorm_exception, virt=1
-	mfspr	r10,SPRN_HSRR1
-	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	andis.	r10,r12,(HSRR1_DENORM)@h /* denorm? */
 	bne+	denorm_assist
-	mfspr	r11,SPRN_HSRR0
-	mfspr	r12,SPRN_HSRR1
 	GEN_BRANCH_TO_COMMON denorm_exception, virt=1
 EXC_VIRT_END(denorm_exception, 0x5500, 0x100)
 #else
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 18:24 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53   ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19  9:18   ` Christophe Leroy
2020-03-20  3:39     ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20   ` Segher Boessenkool
2020-02-26  3:39     ` Nicholas Piggin
2020-03-07  0:54     ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27  8:54   ` Christophe Leroy
2021-01-28  0:09     ` Nicholas Piggin
2021-02-03 16:25   ` Christophe Leroy
2021-02-04  3:27     ` Nicholas Piggin
2021-02-04  8:03       ` Christophe Leroy
2021-02-04  8:53         ` Nicholas Piggin
2021-02-05  0:22           ` Michael Ellerman
2021-02-05  2:16             ` Nicholas Piggin
2021-02-05  6:04               ` Christophe Leroy
2021-02-06  2:28                 ` Nicholas Piggin
2021-02-27 10:07   ` Christophe Leroy
2021-03-01  0:47     ` Nicholas Piggin
2021-03-15 13:41   ` Christophe Leroy
2021-03-16  7:36     ` Nicholas Piggin
2021-03-19 11:44       ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20   ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-24  8:48     ` Nicholas Piggin
2020-03-24 19:38       ` Michal Suchánek
2020-04-03  7:13         ` Nicholas Piggin
2020-04-03 10:52           ` Michal Suchánek
2020-04-03 11:26             ` Nicholas Piggin
2020-04-03 11:51               ` Michal Suchánek
2020-04-06 20:52           ` Michal Suchánek
2020-04-06 21:00           ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-07  5:21             ` Christophe Leroy
2020-04-09 11:22               ` Michal Suchánek
2020-03-19 12:19   ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-24  8:54     ` Nicholas Piggin
2020-03-24 19:30       ` Michal Suchánek
2020-04-03  7:16         ` Nicholas Piggin
2020-03-19 12:19   ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 13:37     ` Andy Shevchenko
2020-03-19 14:00       ` Michal Suchánek
2020-03-19 14:26         ` Andy Shevchenko
2020-03-19 17:03     ` Joe Perches
2020-03-19 12:36   ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 14:01     ` Michal Suchánek
2020-04-03  7:25   ` Nicholas Piggin
2020-04-03  7:26     ` Christophe Leroy
2020-04-03  9:43       ` Nicholas Piggin
2020-04-05  0:40         ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-04-06 13:05     ` Michael Ellerman
2020-03-20 10:20   ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-04-07  5:50     ` Christophe Leroy
2020-04-07  9:57       ` Michal Suchánek
2020-03-20 10:20   ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:33     ` Andy Shevchenko
2020-03-20 11:23       ` Michal Suchánek
2020-03-20 12:42         ` Andy Shevchenko
2020-03-20 14:42           ` Joe Perches
2020-03-20 16:28             ` Michal Suchánek
2020-03-20 16:31             ` Andy Shevchenko
2020-03-20 16:42               ` Michal Suchánek
2020-03-20 16:47                 ` Andy Shevchenko
2020-03-20 21:36               ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225173541.1549955-14-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msuchanek@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).