linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros
Date: Wed, 26 Feb 2020 03:35:23 +1000	[thread overview]
Message-ID: <20200225173541.1549955-15-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>

These are used infrequently enough they don't provide much help, so
inline them.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------
 1 file changed, 28 insertions(+), 54 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index f4f35d01fe00..feb563416abd 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -110,46 +110,6 @@ name:
 #define EXC_HV		1
 #define EXC_STD		0
 
-/*
- * PPR save/restore macros used in exceptions-64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra)						\
-BEGIN_FTR_SECTION_NESTED(940)						\
-	ld	ra,area+EX_PPR(r13);	/* Read PPR from paca */	\
-	std	ra,_PPR(r1);						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra)					\
-BEGIN_FTR_SECTION_NESTED(941)						\
-	ld	ra,area+EX_PPR(r13);					\
-	mtspr	SPRN_PPR,ra;						\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mfspr	ra,spr;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr)					\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	mtspr	spr,ra;							\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr)				\
-BEGIN_FTR_SECTION_NESTED(943)						\
-	std	ra,offset(r13);						\
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
 /*
  * Branch to label using its 0xC000 address. This results in instruction
  * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n
 	cmpwi	r10,KVM_GUEST_MODE_SKIP
 	beq	89f
 	.else
-BEGIN_FTR_SECTION_NESTED(947)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.endif
 
 	ld	r10,PACA_EXGEN+EX_CTR(r13)
 	mtctr	r10
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_PPR(r13)
 	std	r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r11,IAREA+EX_R11(r13)
 	ld	r12,IAREA+EX_R12(r13)
 	std	r12,HSTATE_SCRATCH0(r13)
@@ -386,10 +346,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	SET_SCRATCH0(r13)			/* save r13 */
 	GET_PACA(r13)
 	std	r9,IAREA+EX_R9(r13)		/* save r9 */
-	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	mfspr	r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
 	std	r10,IAREA+EX_R10(r13)		/* save r10 - r12 */
-	OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+	mfspr	r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.if \ool
 	.if !\virt
 	b	tramp_real_\name
@@ -402,8 +366,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
 	.endif
 	.endif
 
-	OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR)
-	OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+	std	r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+	std	r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	INTERRUPT_TO_KERNEL
 	mfctr	r10
 	std	r10,IAREA+EX_CTR(r13)
@@ -558,7 +526,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
 	.endif
 	beq	101f			/* if from kernel mode		*/
 	ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
-	SAVE_PPR(IAREA, r9)
+BEGIN_FTR_SECTION
+	ld	r9,IAREA+EX_PPR(r13)	/* Read PPR from paca		*/
+	std	r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 101:
 	.else
 	.if IKUAP
@@ -598,10 +569,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
 	std	r10,_DSISR(r1)
 	.endif
 
-BEGIN_FTR_SECTION_NESTED(66)
+BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_CFAR(r13)
 	std	r10,ORIG_GPR3(r1)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r10,IAREA+EX_CTR(r13)
 	std	r10,_CTR(r1)
 	std	r2,GPR2(r1)		/* save r2 in stackframe	*/
@@ -1683,10 +1654,10 @@ TRAMP_REAL_BEGIN(system_call_kvm)
 	  * HMT_MEDIUM. That allows the KVM code to save that value into the
 	  * guest state (it is the guest's PPR value).
 	  */
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
 	mfspr	r10,SPRN_PPR
 	std	r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
 	mfctr	r10
 	SET_SCRATCH0(r10)
@@ -2241,7 +2212,10 @@ denorm_done:
 	mtspr	SPRN_HSRR0,r11
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)
-	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_PPR(r13)
+	mtspr	SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 BEGIN_FTR_SECTION
 	ld	r10,PACA_EXGEN+EX_CFAR(r13)
 	mtspr	SPRN_CFAR,r10
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 18:19 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53   ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19  9:18   ` Christophe Leroy
2020-03-20  3:39     ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20   ` Segher Boessenkool
2020-02-26  3:39     ` Nicholas Piggin
2020-03-07  0:54     ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27  8:54   ` Christophe Leroy
2021-01-28  0:09     ` Nicholas Piggin
2021-02-03 16:25   ` Christophe Leroy
2021-02-04  3:27     ` Nicholas Piggin
2021-02-04  8:03       ` Christophe Leroy
2021-02-04  8:53         ` Nicholas Piggin
2021-02-05  0:22           ` Michael Ellerman
2021-02-05  2:16             ` Nicholas Piggin
2021-02-05  6:04               ` Christophe Leroy
2021-02-06  2:28                 ` Nicholas Piggin
2021-02-27 10:07   ` Christophe Leroy
2021-03-01  0:47     ` Nicholas Piggin
2021-03-15 13:41   ` Christophe Leroy
2021-03-16  7:36     ` Nicholas Piggin
2021-03-19 11:44       ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20   ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-24  8:48     ` Nicholas Piggin
2020-03-24 19:38       ` Michal Suchánek
2020-04-03  7:13         ` Nicholas Piggin
2020-04-03 10:52           ` Michal Suchánek
2020-04-03 11:26             ` Nicholas Piggin
2020-04-03 11:51               ` Michal Suchánek
2020-04-06 20:52           ` Michal Suchánek
2020-04-06 21:00           ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-07  5:21             ` Christophe Leroy
2020-04-09 11:22               ` Michal Suchánek
2020-03-19 12:19   ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-24  8:54     ` Nicholas Piggin
2020-03-24 19:30       ` Michal Suchánek
2020-04-03  7:16         ` Nicholas Piggin
2020-03-19 12:19   ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 13:37     ` Andy Shevchenko
2020-03-19 14:00       ` Michal Suchánek
2020-03-19 14:26         ` Andy Shevchenko
2020-03-19 17:03     ` Joe Perches
2020-03-19 12:36   ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 14:01     ` Michal Suchánek
2020-04-03  7:25   ` Nicholas Piggin
2020-04-03  7:26     ` Christophe Leroy
2020-04-03  9:43       ` Nicholas Piggin
2020-04-05  0:40         ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-04-06 13:05     ` Michael Ellerman
2020-03-20 10:20   ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-04-07  5:50     ` Christophe Leroy
2020-04-07  9:57       ` Michal Suchánek
2020-03-20 10:20   ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:33     ` Andy Shevchenko
2020-03-20 11:23       ` Michal Suchánek
2020-03-20 12:42         ` Andy Shevchenko
2020-03-20 14:42           ` Joe Perches
2020-03-20 16:28             ` Michal Suchánek
2020-03-20 16:31             ` Andy Shevchenko
2020-03-20 16:42               ` Michal Suchánek
2020-03-20 16:47                 ` Andy Shevchenko
2020-03-20 21:36               ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225173541.1549955-15-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msuchanek@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).