From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER
Date: Wed, 26 Feb 2020 03:35:17 +1000 [thread overview]
Message-ID: <20200225173541.1549955-9-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 55 +++++++++++++---------------
1 file changed, 26 insertions(+), 29 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 90514766dc7d..cba99f9a815b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -266,15 +266,6 @@ do_define_int n
.endif
.endm
-.macro INT_KVM_HANDLER name, vec, hsrr, area, skip
- TRAMP_KVM_BEGIN(\name\()_kvm)
- KVM_HANDLER \vec, \hsrr, \area, \skip
-.endm
-
-.macro GEN_KVM name
- KVM_HANDLER IVEC, IHSRR, IAREA, IKVM_SKIP
-.endm
-
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
@@ -293,35 +284,35 @@ do_define_int n
bne \name\()_kvm
.endm
-.macro KVM_HANDLER vec, hsrr, area, skip
- .if \skip
+.macro GEN_KVM name
+ .if IKVM_SKIP
cmpwi r10,KVM_GUEST_MODE_SKIP
beq 89f
.else
BEGIN_FTR_SECTION_NESTED(947)
- ld r10,\area+EX_CFAR(r13)
+ ld r10,IAREA+EX_CFAR(r13)
std r10,HSTATE_CFAR(r13)
END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
.endif
BEGIN_FTR_SECTION_NESTED(948)
- ld r10,\area+EX_PPR(r13)
+ ld r10,IAREA+EX_PPR(r13)
std r10,HSTATE_PPR(r13)
END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
- ld r10,\area+EX_R10(r13)
+ ld r10,IAREA+EX_R10(r13)
std r12,HSTATE_SCRATCH0(r13)
sldi r12,r9,32
/* HSRR variants have the 0x2 bit added to their trap number */
- .if \hsrr == EXC_HV_OR_STD
+ .if IHSRR == EXC_HV_OR_STD
BEGIN_FTR_SECTION
- ori r12,r12,(\vec + 0x2)
+ ori r12,r12,(IVEC + 0x2)
FTR_SECTION_ELSE
- ori r12,r12,(\vec)
+ ori r12,r12,(IVEC)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
- .elseif \hsrr
- ori r12,r12,(\vec + 0x2)
+ .elseif IHSRR
+ ori r12,r12,(IVEC+ 0x2)
.else
- ori r12,r12,(\vec)
+ ori r12,r12,(IVEC)
.endif
#ifdef CONFIG_RELOCATABLE
@@ -334,25 +325,25 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
std r9,HSTATE_SCRATCH1(r13)
__LOAD_FAR_HANDLER(r9, kvmppc_interrupt)
mtctr r9
- ld r9,\area+EX_R9(r13)
+ ld r9,IAREA+EX_R9(r13)
bctr
#else
- ld r9,\area+EX_R9(r13)
+ ld r9,IAREA+EX_R9(r13)
b kvmppc_interrupt
#endif
- .if \skip
+ .if IKVM_SKIP
89: mtocrf 0x80,r9
- ld r9,\area+EX_R9(r13)
- ld r10,\area+EX_R10(r13)
- .if \hsrr == EXC_HV_OR_STD
+ ld r9,IAREA+EX_R9(r13)
+ ld r10,IAREA+EX_R10(r13)
+ .if IHSRR == EXC_HV_OR_STD
BEGIN_FTR_SECTION
b kvmppc_skip_Hinterrupt
FTR_SECTION_ELSE
b kvmppc_skip_interrupt
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
- .elseif \hsrr
+ .elseif IHSRR
b kvmppc_skip_Hinterrupt
.else
b kvmppc_skip_interrupt
@@ -363,7 +354,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
#else
.macro KVMTEST name, hsrr, n
.endm
-.macro KVM_HANDLER name, vec, hsrr, area, skip
+.macro GEN_KVM name
.endm
#endif
@@ -1627,6 +1618,12 @@ EXC_VIRT_NONE(0x4b00, 0x100)
* without saving, though xer is not a good idea to use, as hardware may
* interpret some bits so it may be costly to change them.
*/
+INT_DEFINE_BEGIN(system_call)
+ IVEC=0xc00
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(system_call)
+
.macro SYSTEM_CALL virt
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
/*
@@ -1720,7 +1717,7 @@ TRAMP_KVM_BEGIN(system_call_kvm)
SET_SCRATCH0(r10)
std r9,PACA_EXGEN+EX_R9(r13)
mfcr r9
- KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0
+ GEN_KVM system_call
#endif
--
2.23.0
next prev parent reply other threads:[~2020-02-25 17:58 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53 ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19 9:18 ` Christophe Leroy
2020-03-20 3:39 ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20 ` Segher Boessenkool
2020-02-26 3:39 ` Nicholas Piggin
2020-03-07 0:54 ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27 8:54 ` Christophe Leroy
2021-01-28 0:09 ` Nicholas Piggin
2021-02-03 16:25 ` Christophe Leroy
2021-02-04 3:27 ` Nicholas Piggin
2021-02-04 8:03 ` Christophe Leroy
2021-02-04 8:53 ` Nicholas Piggin
2021-02-05 0:22 ` Michael Ellerman
2021-02-05 2:16 ` Nicholas Piggin
2021-02-05 6:04 ` Christophe Leroy
2021-02-06 2:28 ` Nicholas Piggin
2021-02-27 10:07 ` Christophe Leroy
2021-03-01 0:47 ` Nicholas Piggin
2021-03-15 13:41 ` Christophe Leroy
2021-03-16 7:36 ` Nicholas Piggin
2021-03-19 11:44 ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20 ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-24 8:48 ` Nicholas Piggin
2020-03-24 19:38 ` Michal Suchánek
2020-04-03 7:13 ` Nicholas Piggin
2020-04-03 10:52 ` Michal Suchánek
2020-04-03 11:26 ` Nicholas Piggin
2020-04-03 11:51 ` Michal Suchánek
2020-04-06 20:52 ` Michal Suchánek
2020-04-06 21:00 ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-07 5:21 ` Christophe Leroy
2020-04-09 11:22 ` Michal Suchánek
2020-03-19 12:19 ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-24 8:54 ` Nicholas Piggin
2020-03-24 19:30 ` Michal Suchánek
2020-04-03 7:16 ` Nicholas Piggin
2020-03-19 12:19 ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 13:37 ` Andy Shevchenko
2020-03-19 14:00 ` Michal Suchánek
2020-03-19 14:26 ` Andy Shevchenko
2020-03-19 17:03 ` Joe Perches
2020-03-19 12:36 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 14:01 ` Michal Suchánek
2020-04-03 7:25 ` Nicholas Piggin
2020-04-03 7:26 ` Christophe Leroy
2020-04-03 9:43 ` Nicholas Piggin
2020-04-05 0:40 ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-04-06 13:05 ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-04-07 5:50 ` Christophe Leroy
2020-04-07 9:57 ` Michal Suchánek
2020-03-20 10:20 ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:33 ` Andy Shevchenko
2020-03-20 11:23 ` Michal Suchánek
2020-03-20 12:42 ` Andy Shevchenko
2020-03-20 14:42 ` Joe Perches
2020-03-20 16:28 ` Michal Suchánek
2020-03-20 16:31 ` Andy Shevchenko
2020-03-20 16:42 ` Michal Suchánek
2020-03-20 16:47 ` Andy Shevchenko
2020-03-20 21:36 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225173541.1549955-9-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=msuchanek@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).