[v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine

linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed

* [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
@ 2020-07-23  7:32 Athira Rajeev
  2020-07-23  7:40 ` Jordan Niethe
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Athira Rajeev @ 2020-07-23  7:32 UTC (permalink / raw)
  To: mpe; +Cc: jniethe5, mikey, maddy, linuxppc-dev

Initialize Monitor Mode Control Register 3 (MMCR3)
SPR which is new in power10. For PowerISA v3.1, BHRB disable
is controlled via Monitor Mode Control Register A (MMCRA) bit,
namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
MMCRA BHRBRD to disable BHRB feature at boot for power10.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
Dependency:
- On power10 PMU base enablement series V3:
  https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=190462

Changes from v3 -> v4
- Addressed review comments from Jordan and Michael Ellerman.
  This patch was initially part of Power10 PMU base enablement
  series. Moving this as separate patch as suggested by Michael
  Ellerman. Hence dependency of initial series Patch 7 which defines
  MMCRA_BHRB_DISABLE. Addressed review comments from Jordan to make
  sure existing PMU function (__INIT_PMU) will not overwrite ISA 3.1
  updates

Changes from v2 -> v3
- Addressed review comment from Michael Ellerman to
  call PMU init from __setup_cpu_power10

 arch/powerpc/kernel/cpu_setup_power.S | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index efdcfa7..3fa6eef 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -94,13 +94,15 @@ _GLOBAL(__restore_cpu_power8)
 _GLOBAL(__setup_cpu_power10)
 	mflr	r11
 	bl	__init_FSCR_power10
+	bl	__init_PMU
+	bl	__init_PMU_ISA31
 	b	1f
 
 _GLOBAL(__setup_cpu_power9)
 	mflr	r11
 	bl	__init_FSCR
-1:	bl	__init_PMU
-	bl	__init_hvmode_206
+	bl	__init_PMU
+1:	bl	__init_hvmode_206
 	mtlr	r11
 	beqlr
 	li	r0,0
@@ -124,13 +126,15 @@ _GLOBAL(__setup_cpu_power9)
 _GLOBAL(__restore_cpu_power10)
 	mflr	r11
 	bl	__init_FSCR_power10
+	bl	__init_PMU
+	bl	__init_PMU_ISA31
 	b	1f
 
 _GLOBAL(__restore_cpu_power9)
 	mflr	r11
 	bl	__init_FSCR
-1:	bl	__init_PMU
-	mfmsr	r3
+	bl	__init_PMU
+1:	mfmsr	r3
 	rldicl.	r0,r3,4,63
 	mtlr	r11
 	beqlr
@@ -233,3 +237,10 @@ __init_PMU_ISA207:
 	li	r5,0
 	mtspr	SPRN_MMCRS,r5
 	blr
+
+__init_PMU_ISA31:
+	li	r5,0
+	mtspr	SPRN_MMCR3,r5
+	LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
+	mtspr	SPRN_MMCRA,r5
+	blr
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
  2020-07-23  7:32 [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine Athira Rajeev
@ 2020-07-23  7:40 ` Jordan Niethe
  2020-07-24  3:02 ` kernel test robot
  2020-07-27  7:26 ` Michael Ellerman
  2 siblings, 0 replies; 5+ messages in thread
From: Jordan Niethe @ 2020-07-23  7:40 UTC (permalink / raw)
  To: Athira Rajeev; +Cc: Michael Neuling, maddy, linuxppc-dev

On Thu, Jul 23, 2020 at 5:32 PM Athira Rajeev
<atrajeev@linux.vnet.ibm.com> wrote:
>
> Initialize Monitor Mode Control Register 3 (MMCR3)
> SPR which is new in power10. For PowerISA v3.1, BHRB disable
> is controlled via Monitor Mode Control Register A (MMCRA) bit,
> namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
> MMCRA BHRBRD to disable BHRB feature at boot for power10.
>
> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
> ---
> Dependency:
> - On power10 PMU base enablement series V3:
>   https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=190462
>
> Changes from v3 -> v4
> - Addressed review comments from Jordan and Michael Ellerman.
>   This patch was initially part of Power10 PMU base enablement
>   series. Moving this as separate patch as suggested by Michael
>   Ellerman. Hence dependency of initial series Patch 7 which defines
>   MMCRA_BHRB_DISABLE. Addressed review comments from Jordan to make
>   sure existing PMU function (__INIT_PMU) will not overwrite ISA 3.1
>   updates
>
> Changes from v2 -> v3
> - Addressed review comment from Michael Ellerman to
>   call PMU init from __setup_cpu_power10
>
>  arch/powerpc/kernel/cpu_setup_power.S | 19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index efdcfa7..3fa6eef 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -94,13 +94,15 @@ _GLOBAL(__restore_cpu_power8)
>  _GLOBAL(__setup_cpu_power10)
>         mflr    r11
>         bl      __init_FSCR_power10
> +       bl      __init_PMU
> +       bl      __init_PMU_ISA31
>         b       1f
>
>  _GLOBAL(__setup_cpu_power9)
>         mflr    r11
>         bl      __init_FSCR
> -1:     bl      __init_PMU
> -       bl      __init_hvmode_206
> +       bl      __init_PMU
> +1:     bl      __init_hvmode_206
>         mtlr    r11
>         beqlr
>         li      r0,0
> @@ -124,13 +126,15 @@ _GLOBAL(__setup_cpu_power9)
>  _GLOBAL(__restore_cpu_power10)
>         mflr    r11
>         bl      __init_FSCR_power10
> +       bl      __init_PMU
> +       bl      __init_PMU_ISA31
>         b       1f
>
>  _GLOBAL(__restore_cpu_power9)
>         mflr    r11
>         bl      __init_FSCR
> -1:     bl      __init_PMU
> -       mfmsr   r3
> +       bl      __init_PMU
> +1:     mfmsr   r3
>         rldicl. r0,r3,4,63
>         mtlr    r11
>         beqlr
> @@ -233,3 +237,10 @@ __init_PMU_ISA207:
>         li      r5,0
>         mtspr   SPRN_MMCRS,r5
>         blr
> +
> +__init_PMU_ISA31:
> +       li      r5,0
> +       mtspr   SPRN_MMCR3,r5
> +       LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
> +       mtspr   SPRN_MMCRA,r5
> +       blr
> --
> 1.8.3.1
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
  2020-07-23  7:32 [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine Athira Rajeev
  2020-07-23  7:40 ` Jordan Niethe
@ 2020-07-24  3:02 ` kernel test robot
  2020-07-24  6:32   ` Athira Rajeev
  2020-07-27  7:26 ` Michael Ellerman
  2 siblings, 1 reply; 5+ messages in thread
From: kernel test robot @ 2020-07-24  3:02 UTC (permalink / raw)
  To: Athira Rajeev, mpe; +Cc: jniethe5, mikey, maddy, kbuild-all, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 7614 bytes --]

Hi Athira,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on powerpc/next]
[also build test ERROR on v5.8-rc6 next-20200723]
[cannot apply to mpe/next scottwood/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Athira-Rajeev/powerpc-perf-Initialize-power10-PMU-registers-in-cpu-setup-routine/20200723-153537
base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: powerpc-defconfig (attached as .config)
compiler: powerpc64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
>> arch/powerpc/kernel/cpu_setup_power.S:244: Error: non-constant expression in ".if" statement
>> arch/powerpc/kernel/cpu_setup_power.S:244: Error: non-constant expression in ".if" statement
>> arch/powerpc/kernel/cpu_setup_power.S:243: Error: unsupported relocation against SPRN_MMCR3

vim +244 arch/powerpc/kernel/cpu_setup_power.S

    14	
    15	/* Entry: r3 = crap, r4 = ptr to cputable entry
    16	 *
    17	 * Note that we can be called twice for pseudo-PVRs
    18	 */
    19	_GLOBAL(__setup_cpu_power7)
    20		mflr	r11
    21		bl	__init_hvmode_206
    22		mtlr	r11
    23		beqlr
    24		li	r0,0
    25		mtspr	SPRN_LPID,r0
    26		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
    27		mtspr	SPRN_PCR,r0
    28		mfspr	r3,SPRN_LPCR
    29		li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
    30		bl	__init_LPCR_ISA206
    31		mtlr	r11
    32		blr
    33	
    34	_GLOBAL(__restore_cpu_power7)
    35		mflr	r11
    36		mfmsr	r3
    37		rldicl.	r0,r3,4,63
    38		beqlr
    39		li	r0,0
    40		mtspr	SPRN_LPID,r0
    41		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
    42		mtspr	SPRN_PCR,r0
    43		mfspr	r3,SPRN_LPCR
    44		li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
    45		bl	__init_LPCR_ISA206
    46		mtlr	r11
    47		blr
    48	
    49	_GLOBAL(__setup_cpu_power8)
    50		mflr	r11
    51		bl	__init_FSCR
    52		bl	__init_PMU
    53		bl	__init_PMU_ISA207
    54		bl	__init_hvmode_206
    55		mtlr	r11
    56		beqlr
    57		li	r0,0
    58		mtspr	SPRN_LPID,r0
    59		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
    60		mtspr	SPRN_PCR,r0
    61		mfspr	r3,SPRN_LPCR
    62		ori	r3, r3, LPCR_PECEDH
    63		li	r4,0 /* LPES = 0 */
    64		bl	__init_LPCR_ISA206
    65		bl	__init_HFSCR
    66		bl	__init_PMU_HV
    67		bl	__init_PMU_HV_ISA207
    68		mtlr	r11
    69		blr
    70	
    71	_GLOBAL(__restore_cpu_power8)
    72		mflr	r11
    73		bl	__init_FSCR
    74		bl	__init_PMU
    75		bl	__init_PMU_ISA207
    76		mfmsr	r3
    77		rldicl.	r0,r3,4,63
    78		mtlr	r11
    79		beqlr
    80		li	r0,0
    81		mtspr	SPRN_LPID,r0
    82		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
    83		mtspr	SPRN_PCR,r0
    84		mfspr   r3,SPRN_LPCR
    85		ori	r3, r3, LPCR_PECEDH
    86		li	r4,0 /* LPES = 0 */
    87		bl	__init_LPCR_ISA206
    88		bl	__init_HFSCR
    89		bl	__init_PMU_HV
    90		bl	__init_PMU_HV_ISA207
    91		mtlr	r11
    92		blr
    93	
    94	_GLOBAL(__setup_cpu_power10)
    95		mflr	r11
    96		bl	__init_FSCR_power10
    97		bl	__init_PMU
    98		bl	__init_PMU_ISA31
    99		b	1f
   100	
   101	_GLOBAL(__setup_cpu_power9)
   102		mflr	r11
   103		bl	__init_FSCR
   104		bl	__init_PMU
   105	1:	bl	__init_hvmode_206
   106		mtlr	r11
   107		beqlr
   108		li	r0,0
   109		mtspr	SPRN_PSSCR,r0
   110		mtspr	SPRN_LPID,r0
   111		mtspr	SPRN_PID,r0
   112		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
   113		mtspr	SPRN_PCR,r0
   114		mfspr	r3,SPRN_LPCR
   115		LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE  | LPCR_HEIC)
   116		or	r3, r3, r4
   117		LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
   118		andc	r3, r3, r4
   119		li	r4,0 /* LPES = 0 */
   120		bl	__init_LPCR_ISA300
   121		bl	__init_HFSCR
   122		bl	__init_PMU_HV
   123		mtlr	r11
   124		blr
   125	
   126	_GLOBAL(__restore_cpu_power10)
   127		mflr	r11
   128		bl	__init_FSCR_power10
   129		bl	__init_PMU
   130		bl	__init_PMU_ISA31
   131		b	1f
   132	
   133	_GLOBAL(__restore_cpu_power9)
   134		mflr	r11
   135		bl	__init_FSCR
   136		bl	__init_PMU
   137	1:	mfmsr	r3
   138		rldicl.	r0,r3,4,63
   139		mtlr	r11
   140		beqlr
   141		li	r0,0
   142		mtspr	SPRN_PSSCR,r0
   143		mtspr	SPRN_LPID,r0
   144		mtspr	SPRN_PID,r0
   145		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
   146		mtspr	SPRN_PCR,r0
   147		mfspr   r3,SPRN_LPCR
   148		LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
   149		or	r3, r3, r4
   150		LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
   151		andc	r3, r3, r4
   152		li	r4,0 /* LPES = 0 */
   153		bl	__init_LPCR_ISA300
   154		bl	__init_HFSCR
   155		bl	__init_PMU_HV
   156		mtlr	r11
   157		blr
   158	
   159	__init_hvmode_206:
   160		/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
   161		mfmsr	r3
   162		rldicl.	r0,r3,4,63
   163		bnelr
   164		ld	r5,CPU_SPEC_FEATURES(r4)
   165		LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE | CPU_FTR_P9_TM_HV_ASSIST)
   166		andc	r5,r5,r6
   167		std	r5,CPU_SPEC_FEATURES(r4)
   168		blr
   169	
   170	__init_LPCR_ISA206:
   171		/* Setup a sane LPCR:
   172		 *   Called with initial LPCR in R3 and desired LPES 2-bit value in R4
   173		 *
   174		 *   LPES = 0b01 (HSRR0/1 used for 0x500)
   175		 *   PECE = 0b111
   176		 *   DPFD = 4
   177		 *   HDICE = 0
   178		 *   VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
   179		 *   VRMASD = 0b10000 (L=1, LP=00)
   180		 *
   181		 * Other bits untouched for now
   182		 */
   183		li	r5,0x10
   184		rldimi	r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
   185	
   186		/* POWER9 has no VRMASD */
   187	__init_LPCR_ISA300:
   188		rldimi	r3,r4, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
   189		ori	r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
   190		li	r5,4
   191		rldimi	r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
   192		clrrdi	r3,r3,1		/* clear HDICE */
   193		li	r5,4
   194		rldimi	r3,r5, LPCR_VC_SH, 0
   195		mtspr	SPRN_LPCR,r3
   196		isync
   197		blr
   198	
   199	__init_FSCR_power10:
   200		mfspr	r3, SPRN_FSCR
   201		ori	r3, r3, FSCR_PREFIX
   202		mtspr	SPRN_FSCR, r3
   203		// fall through
   204	
   205	__init_FSCR:
   206		mfspr	r3,SPRN_FSCR
   207		ori	r3,r3,FSCR_TAR|FSCR_EBB
   208		mtspr	SPRN_FSCR,r3
   209		blr
   210	
   211	__init_HFSCR:
   212		mfspr	r3,SPRN_HFSCR
   213		ori	r3,r3,HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|\
   214			      HFSCR_DSCR|HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP
   215		mtspr	SPRN_HFSCR,r3
   216		blr
   217	
   218	__init_PMU_HV:
   219		li	r5,0
   220		mtspr	SPRN_MMCRC,r5
   221		blr
   222	
   223	__init_PMU_HV_ISA207:
   224		li	r5,0
   225		mtspr	SPRN_MMCRH,r5
   226		blr
   227	
   228	__init_PMU:
   229		li	r5,0
   230		mtspr	SPRN_MMCRA,r5
   231		mtspr	SPRN_MMCR0,r5
   232		mtspr	SPRN_MMCR1,r5
   233		mtspr	SPRN_MMCR2,r5
   234		blr
   235	
   236	__init_PMU_ISA207:
   237		li	r5,0
   238		mtspr	SPRN_MMCRS,r5
   239		blr
   240	
   241	__init_PMU_ISA31:
   242		li	r5,0
 > 243		mtspr	SPRN_MMCR3,r5
 > 244		LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 26258 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
  2020-07-24  3:02 ` kernel test robot
@ 2020-07-24  6:32   ` Athira Rajeev
  0 siblings, 0 replies; 5+ messages in thread
From: Athira Rajeev @ 2020-07-24  6:32 UTC (permalink / raw)
  To: kernel test robot
  Cc: Michael Neuling, maddy, kbuild-all, Jordan Niethe, linuxppc-dev



> On 24-Jul-2020, at 8:32 AM, kernel test robot <lkp@intel.com> wrote:
> 
> Hi Athira,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on powerpc/next]
> [also build test ERROR on v5.8-rc6 next-20200723]
> [cannot apply to mpe/next scottwood/next]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Athira-Rajeev/powerpc-perf-Initialize-power10-PMU-registers-in-cpu-setup-routine/20200723-153537
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
> config: powerpc-defconfig (attached as .config)
> compiler: powerpc64-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>        chmod +x ~/bin/make.cross
>        # save the attached .config to linux build tree
>        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> 
>   arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
>>> arch/powerpc/kernel/cpu_setup_power.S:244: Error: non-constant expression in ".if" statement
>>> arch/powerpc/kernel/cpu_setup_power.S:244: Error: non-constant expression in ".if" statement
>>> arch/powerpc/kernel/cpu_setup_power.S:243: Error: unsupported relocation against SPRN_MMCR3

Hi,

As mentioned in changelog:

This patch was initially part of Power10 PMU base enablement
 series ( https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=190462 ).
 Moving this as separate patch as suggested by Michael
 Ellerman. Hence there is a dependency on initial series ( Patch 7 ) which defines
 MMCRA_BHRB_DISABLE and new SPR’s. And the build error is because of that.

Thanks
Athira

> 
> vim +244 arch/powerpc/kernel/cpu_setup_power.S
> 
>    14	
>    15	/* Entry: r3 = crap, r4 = ptr to cputable entry
>    16	 *
>    17	 * Note that we can be called twice for pseudo-PVRs
>    18	 */
>    19	_GLOBAL(__setup_cpu_power7)
>    20		mflr	r11
>    21		bl	__init_hvmode_206
>    22		mtlr	r11
>    23		beqlr
>    24		li	r0,0
>    25		mtspr	SPRN_LPID,r0
>    26		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>    27		mtspr	SPRN_PCR,r0
>    28		mfspr	r3,SPRN_LPCR
>    29		li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
>    30		bl	__init_LPCR_ISA206
>    31		mtlr	r11
>    32		blr
>    33	
>    34	_GLOBAL(__restore_cpu_power7)
>    35		mflr	r11
>    36		mfmsr	r3
>    37		rldicl.	r0,r3,4,63
>    38		beqlr
>    39		li	r0,0
>    40		mtspr	SPRN_LPID,r0
>    41		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>    42		mtspr	SPRN_PCR,r0
>    43		mfspr	r3,SPRN_LPCR
>    44		li	r4,(LPCR_LPES1 >> LPCR_LPES_SH)
>    45		bl	__init_LPCR_ISA206
>    46		mtlr	r11
>    47		blr
>    48	
>    49	_GLOBAL(__setup_cpu_power8)
>    50		mflr	r11
>    51		bl	__init_FSCR
>    52		bl	__init_PMU
>    53		bl	__init_PMU_ISA207
>    54		bl	__init_hvmode_206
>    55		mtlr	r11
>    56		beqlr
>    57		li	r0,0
>    58		mtspr	SPRN_LPID,r0
>    59		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>    60		mtspr	SPRN_PCR,r0
>    61		mfspr	r3,SPRN_LPCR
>    62		ori	r3, r3, LPCR_PECEDH
>    63		li	r4,0 /* LPES = 0 */
>    64		bl	__init_LPCR_ISA206
>    65		bl	__init_HFSCR
>    66		bl	__init_PMU_HV
>    67		bl	__init_PMU_HV_ISA207
>    68		mtlr	r11
>    69		blr
>    70	
>    71	_GLOBAL(__restore_cpu_power8)
>    72		mflr	r11
>    73		bl	__init_FSCR
>    74		bl	__init_PMU
>    75		bl	__init_PMU_ISA207
>    76		mfmsr	r3
>    77		rldicl.	r0,r3,4,63
>    78		mtlr	r11
>    79		beqlr
>    80		li	r0,0
>    81		mtspr	SPRN_LPID,r0
>    82		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>    83		mtspr	SPRN_PCR,r0
>    84		mfspr   r3,SPRN_LPCR
>    85		ori	r3, r3, LPCR_PECEDH
>    86		li	r4,0 /* LPES = 0 */
>    87		bl	__init_LPCR_ISA206
>    88		bl	__init_HFSCR
>    89		bl	__init_PMU_HV
>    90		bl	__init_PMU_HV_ISA207
>    91		mtlr	r11
>    92		blr
>    93	
>    94	_GLOBAL(__setup_cpu_power10)
>    95		mflr	r11
>    96		bl	__init_FSCR_power10
>    97		bl	__init_PMU
>    98		bl	__init_PMU_ISA31
>    99		b	1f
>   100	
>   101	_GLOBAL(__setup_cpu_power9)
>   102		mflr	r11
>   103		bl	__init_FSCR
>   104		bl	__init_PMU
>   105	1:	bl	__init_hvmode_206
>   106		mtlr	r11
>   107		beqlr
>   108		li	r0,0
>   109		mtspr	SPRN_PSSCR,r0
>   110		mtspr	SPRN_LPID,r0
>   111		mtspr	SPRN_PID,r0
>   112		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>   113		mtspr	SPRN_PCR,r0
>   114		mfspr	r3,SPRN_LPCR
>   115		LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE  | LPCR_HEIC)
>   116		or	r3, r3, r4
>   117		LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
>   118		andc	r3, r3, r4
>   119		li	r4,0 /* LPES = 0 */
>   120		bl	__init_LPCR_ISA300
>   121		bl	__init_HFSCR
>   122		bl	__init_PMU_HV
>   123		mtlr	r11
>   124		blr
>   125	
>   126	_GLOBAL(__restore_cpu_power10)
>   127		mflr	r11
>   128		bl	__init_FSCR_power10
>   129		bl	__init_PMU
>   130		bl	__init_PMU_ISA31
>   131		b	1f
>   132	
>   133	_GLOBAL(__restore_cpu_power9)
>   134		mflr	r11
>   135		bl	__init_FSCR
>   136		bl	__init_PMU
>   137	1:	mfmsr	r3
>   138		rldicl.	r0,r3,4,63
>   139		mtlr	r11
>   140		beqlr
>   141		li	r0,0
>   142		mtspr	SPRN_PSSCR,r0
>   143		mtspr	SPRN_LPID,r0
>   144		mtspr	SPRN_PID,r0
>   145		LOAD_REG_IMMEDIATE(r0, PCR_MASK)
>   146		mtspr	SPRN_PCR,r0
>   147		mfspr   r3,SPRN_LPCR
>   148		LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
>   149		or	r3, r3, r4
>   150		LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
>   151		andc	r3, r3, r4
>   152		li	r4,0 /* LPES = 0 */
>   153		bl	__init_LPCR_ISA300
>   154		bl	__init_HFSCR
>   155		bl	__init_PMU_HV
>   156		mtlr	r11
>   157		blr
>   158	
>   159	__init_hvmode_206:
>   160		/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
>   161		mfmsr	r3
>   162		rldicl.	r0,r3,4,63
>   163		bnelr
>   164		ld	r5,CPU_SPEC_FEATURES(r4)
>   165		LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE | CPU_FTR_P9_TM_HV_ASSIST)
>   166		andc	r5,r5,r6
>   167		std	r5,CPU_SPEC_FEATURES(r4)
>   168		blr
>   169	
>   170	__init_LPCR_ISA206:
>   171		/* Setup a sane LPCR:
>   172		 *   Called with initial LPCR in R3 and desired LPES 2-bit value in R4
>   173		 *
>   174		 *   LPES = 0b01 (HSRR0/1 used for 0x500)
>   175		 *   PECE = 0b111
>   176		 *   DPFD = 4
>   177		 *   HDICE = 0
>   178		 *   VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
>   179		 *   VRMASD = 0b10000 (L=1, LP=00)
>   180		 *
>   181		 * Other bits untouched for now
>   182		 */
>   183		li	r5,0x10
>   184		rldimi	r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
>   185	
>   186		/* POWER9 has no VRMASD */
>   187	__init_LPCR_ISA300:
>   188		rldimi	r3,r4, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
>   189		ori	r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
>   190		li	r5,4
>   191		rldimi	r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
>   192		clrrdi	r3,r3,1		/* clear HDICE */
>   193		li	r5,4
>   194		rldimi	r3,r5, LPCR_VC_SH, 0
>   195		mtspr	SPRN_LPCR,r3
>   196		isync
>   197		blr
>   198	
>   199	__init_FSCR_power10:
>   200		mfspr	r3, SPRN_FSCR
>   201		ori	r3, r3, FSCR_PREFIX
>   202		mtspr	SPRN_FSCR, r3
>   203		// fall through
>   204	
>   205	__init_FSCR:
>   206		mfspr	r3,SPRN_FSCR
>   207		ori	r3,r3,FSCR_TAR|FSCR_EBB
>   208		mtspr	SPRN_FSCR,r3
>   209		blr
>   210	
>   211	__init_HFSCR:
>   212		mfspr	r3,SPRN_HFSCR
>   213		ori	r3,r3,HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|\
>   214			      HFSCR_DSCR|HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP
>   215		mtspr	SPRN_HFSCR,r3
>   216		blr
>   217	
>   218	__init_PMU_HV:
>   219		li	r5,0
>   220		mtspr	SPRN_MMCRC,r5
>   221		blr
>   222	
>   223	__init_PMU_HV_ISA207:
>   224		li	r5,0
>   225		mtspr	SPRN_MMCRH,r5
>   226		blr
>   227	
>   228	__init_PMU:
>   229		li	r5,0
>   230		mtspr	SPRN_MMCRA,r5
>   231		mtspr	SPRN_MMCR0,r5
>   232		mtspr	SPRN_MMCR1,r5
>   233		mtspr	SPRN_MMCR2,r5
>   234		blr
>   235	
>   236	__init_PMU_ISA207:
>   237		li	r5,0
>   238		mtspr	SPRN_MMCRS,r5
>   239		blr
>   240	
>   241	__init_PMU_ISA31:
>   242		li	r5,0
>> 243		mtspr	SPRN_MMCR3,r5
>> 244		LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
> 
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
> <.config.gz>


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
  2020-07-23  7:32 [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine Athira Rajeev
  2020-07-23  7:40 ` Jordan Niethe
  2020-07-24  3:02 ` kernel test robot
@ 2020-07-27  7:26 ` Michael Ellerman
  2 siblings, 0 replies; 5+ messages in thread
From: Michael Ellerman @ 2020-07-27  7:26 UTC (permalink / raw)
  To: Athira Rajeev, mpe; +Cc: jniethe5, mikey, maddy, linuxppc-dev

On Thu, 23 Jul 2020 03:32:37 -0400, Athira Rajeev wrote:
> Initialize Monitor Mode Control Register 3 (MMCR3)
> SPR which is new in power10. For PowerISA v3.1, BHRB disable
> is controlled via Monitor Mode Control Register A (MMCRA) bit,
> namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
> MMCRA BHRBRD to disable BHRB feature at boot for power10.

Applied to powerpc/next.

[1/1] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
      https://git.kernel.org/powerpc/c/65156f2b1d9d5bf3fd0eac54b0a7fd515c92773c

cheers

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-07-27  7:31 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-23  7:32 [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine Athira Rajeev
2020-07-23  7:40 ` Jordan Niethe
2020-07-24  3:02 ` kernel test robot
2020-07-24  6:32   ` Athira Rajeev
2020-07-27  7:26 ` Michael Ellerman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).