From: Sean Anderson <sean.anderson@seco.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
linux-kernel@vger.kernel.org,
Russell King <linux@armlinux.org.uk>,
Eric Dumazet <edumazet@google.com>,
Rob Herring <robh+dt@kernel.org>,
Paul Mackerras <paulus@samba.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paolo Abeni <pabeni@redhat.com>,
"linuxppc-dev @ lists . ozlabs . org"
<linuxppc-dev@lists.ozlabs.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v5 7/9] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
Date: Mon, 26 Sep 2022 15:03:19 -0400 [thread overview]
Message-ID: <20220926190322.2889342-8-sean.anderson@seco.com> (raw)
In-Reply-To: <20220926190322.2889342-1-sean.anderson@seco.com>
On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.
Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
(no changes since v4)
Changes in v4:
- New
.../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +++++++++++++++++++
.../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
3 files changed, 90 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 000000000000..437dab3fc017
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 000000000000..ad116b17850a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index ecbb447920bc..74e17e134387 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@ usb1: usb@211000 {
/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-1g-0.dtsi"
-/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-4.dtsi"
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2022-09-26 19:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 19:03 [PATCH net-next v5 0/9] [RFT] net: dpaa: Convert to phylink Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 1/9] dt-bindings: net: Expand pcs-handle to an array Sean Anderson
2022-09-27 14:39 ` Rob Herring
2022-09-27 15:33 ` Rob Herring
2022-09-27 16:27 ` Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 2/9] dt-bindings: net: Add Lynx PCS binding Sean Anderson
2022-09-30 14:37 ` Rob Herring
2022-09-26 19:03 ` [PATCH net-next v5 3/9] dt-bindings: net: fman: Add additional interface properties Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 4/9] net: fman: memac: Add serdes support Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 5/9] net: fman: memac: Use lynx pcs driver Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 6/9] net: dpaa: Convert to phylink Sean Anderson
2022-09-26 19:03 ` Sean Anderson [this message]
2022-09-26 19:03 ` [PATCH net-next v5 8/9] powerpc: dts: qoriq: Add nodes for QSGMII PCSs Sean Anderson
2022-09-26 19:03 ` [PATCH net-next v5 9/9] arm64: dts: layerscape: " Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220926190322.2889342-8-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=camelia.groza@nxp.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=paulus@samba.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).