RE: [PATCH 1/3 v2] sdhci: Add auto CMD12 support for eSDHC driver

[Zang Roy-R61911 <r61911@freescale.com>]

=20

> -----Original Message-----
> From: glikely@secretlab.ca [mailto:glikely@secretlab.ca] On=20
> Behalf Of Grant Likely
> Sent: Thursday, August 05, 2010 9:03 AM
> To: Zang Roy-R61911
> Cc: linux-mmc@vger.kernel.org; linuxppc-dev@ozlabs.org;=20
> akpm@linux-foundation.org
> Subject: Re: [PATCH 1/3 v2] sdhci: Add auto CMD12 support for=20
> eSDHC driver
>=20
> On Mon, Aug 2, 2010 at 9:11 PM, Roy Zang=20
> <tie-fei.zang@freescale.com> wrote:
> > From: Jerry Huang <Chang-Ming.Huang@freescale.com>
> >
> > Add auto CMD12 command support for eSDHC driver.
> > This is needed by P4080 and P1022 for block read/write.
> > Manual asynchronous CMD12 abort operation causes protocol=20
> violations on
> > these silicons.
> >
> > Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> > Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> > ---
> > =A0drivers/mmc/host/sdhci-of-core.c | =A0 =A04 ++++
> > =A0drivers/mmc/host/sdhci.c =A0 =A0 =A0 =A0 | =A0 14 ++++++++++++--
> > =A0drivers/mmc/host/sdhci.h =A0 =A0 =A0 =A0 | =A0 =A02 ++
> > =A03 files changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index c6d1bd8..a92566e 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -817,8 +817,12 @@ static void=20
> sdhci_set_transfer_mode(struct sdhci_host *host,
> > =A0 =A0 =A0 =A0WARN_ON(!host->data);
> >
> > =A0 =A0 =A0 =A0mode =3D SDHCI_TRNS_BLK_CNT_EN;
> > - =A0 =A0 =A0 if (data->blocks > 1)
> > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 mode |=3D SDHCI_TRNS_MULTI;
> > + =A0 =A0 =A0 if (data->blocks > 1) {
> > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (host->quirks &=20
> SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
> > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 mode |=3D =
SDHCI_TRNS_MULTI |=20
> SDHCI_TRNS_ACMD12;
> > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 else
> > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 mode |=3D =
SDHCI_TRNS_MULTI;
>=20
> nit:
> +               mode |=3D SDHCI_TRNS_MULTI;
> +               if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
> +                       mode |=3D SDHCI_TRNS_ACMD12;
>=20
> Clearer, no?
why?
Roy