* linux-next: build failure on power pc
@ 2021-01-20 21:29 Yury Norov
2021-01-21 6:09 ` [PATCH] powerpc: fix AKEBONO build failures Randy Dunlap
0 siblings, 1 reply; 7+ messages in thread
From: Yury Norov @ 2021-01-20 21:29 UTC (permalink / raw)
To: linuxppc-dev, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
Hi all,
I found the power pc build broken on today's
linux-next (647060f3b592).
My compiler is:
yury:linux$ powerpc-linux-gnu-gcc --version
powerpc-linux-gnu-gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
The config and error log are attached.
Thanks,
Yury
[-- Attachment #2: ppc.tar.gz --]
[-- Type: application/gzip, Size: 69105 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] powerpc: fix AKEBONO build failures
2021-01-20 21:29 linux-next: build failure on power pc Yury Norov
@ 2021-01-21 6:09 ` Randy Dunlap
2021-01-21 7:17 ` Yury Norov
2021-01-22 1:14 ` Michael Ellerman
0 siblings, 2 replies; 7+ messages in thread
From: Randy Dunlap @ 2021-01-21 6:09 UTC (permalink / raw)
To: Yury Norov, linuxppc-dev, Linux Kernel Mailing List
Cc: Paul Mackerras, linuxppc-dev
On 1/20/21 1:29 PM, Yury Norov wrote:
> Hi all,
>
> I found the power pc build broken on today's
> linux-next (647060f3b592).
Darn, I was building linux-5.11-rc4.
I'll try linux-next after I send this.
---
From: Randy Dunlap <rdunlap@infradead.org>
Fulfill AKEBONO Kconfig requirements.
Fixes these Kconfig warnings (and more) and fixes the subsequent
build errors:
WARNING: unmet direct dependencies detected for NETDEVICES
Depends on [n]: NET [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for MMC_SDHCI
Depends on [n]: MMC [=n] && HAS_DMA [=y]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Yury Norov <yury.norov@gmail.com>
---
arch/powerpc/platforms/44x/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
+++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
@@ -206,6 +206,7 @@ config AKEBONO
select PPC4xx_HSTA_MSI
select I2C
select I2C_IBM_IIC
+ select NET
select NETDEVICES
select ETHERNET
select NET_VENDOR_IBM
@@ -213,6 +214,7 @@ config AKEBONO
select USB if USB_SUPPORT
select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+ select MMC
select MMC_SDHCI
select MMC_SDHCI_PLTFM
select ATA
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] powerpc: fix AKEBONO build failures
2021-01-21 6:09 ` [PATCH] powerpc: fix AKEBONO build failures Randy Dunlap
@ 2021-01-21 7:17 ` Yury Norov
2021-01-22 1:14 ` Michael Ellerman
1 sibling, 0 replies; 7+ messages in thread
From: Yury Norov @ 2021-01-21 7:17 UTC (permalink / raw)
To: Randy Dunlap; +Cc: linuxppc-dev, Linux Kernel Mailing List, Paul Mackerras
On Wed, Jan 20, 2021 at 10:10 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> On 1/20/21 1:29 PM, Yury Norov wrote:
> > Hi all,
> >
> > I found the power pc build broken on today's
> > linux-next (647060f3b592).
>
> Darn, I was building linux-5.11-rc4.
>
> I'll try linux-next after I send this.
>
> ---
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fulfill AKEBONO Kconfig requirements.
>
> Fixes these Kconfig warnings (and more) and fixes the subsequent
> build errors:
>
> WARNING: unmet direct dependencies detected for NETDEVICES
> Depends on [n]: NET [=n]
> Selected by [y]:
> - AKEBONO [=y] && PPC_47x [=y]
>
> WARNING: unmet direct dependencies detected for MMC_SDHCI
> Depends on [n]: MMC [=n] && HAS_DMA [=y]
> Selected by [y]:
> - AKEBONO [=y] && PPC_47x [=y]
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: Yury Norov <yury.norov@gmail.com>
> ---
> arch/powerpc/platforms/44x/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
> @@ -206,6 +206,7 @@ config AKEBONO
> select PPC4xx_HSTA_MSI
> select I2C
> select I2C_IBM_IIC
> + select NET
> select NETDEVICES
> select ETHERNET
> select NET_VENDOR_IBM
> @@ -213,6 +214,7 @@ config AKEBONO
> select USB if USB_SUPPORT
> select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
> select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
> + select MMC
> select MMC_SDHCI
> select MMC_SDHCI_PLTFM
> select ATA
Looks working, thanks.
Tested-by: Yury Norov <yury.norov@gmail.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] powerpc: fix AKEBONO build failures
2021-01-21 6:09 ` [PATCH] powerpc: fix AKEBONO build failures Randy Dunlap
2021-01-21 7:17 ` Yury Norov
@ 2021-01-22 1:14 ` Michael Ellerman
2021-01-22 1:22 ` Randy Dunlap
2021-01-30 23:21 ` Randy Dunlap
1 sibling, 2 replies; 7+ messages in thread
From: Michael Ellerman @ 2021-01-22 1:14 UTC (permalink / raw)
To: Randy Dunlap, Yury Norov, linuxppc-dev, Linux Kernel Mailing List
Cc: Paul Mackerras, linuxppc-dev
Randy Dunlap <rdunlap@infradead.org> writes:
> On 1/20/21 1:29 PM, Yury Norov wrote:
>> Hi all,
>>
>> I found the power pc build broken on today's
>> linux-next (647060f3b592).
>
> Darn, I was building linux-5.11-rc4.
>
> I'll try linux-next after I send this.
>
> ---
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fulfill AKEBONO Kconfig requirements.
>
> Fixes these Kconfig warnings (and more) and fixes the subsequent
> build errors:
>
> WARNING: unmet direct dependencies detected for NETDEVICES
> Depends on [n]: NET [=n]
> Selected by [y]:
> - AKEBONO [=y] && PPC_47x [=y]
>
> WARNING: unmet direct dependencies detected for MMC_SDHCI
> Depends on [n]: MMC [=n] && HAS_DMA [=y]
> Selected by [y]:
> - AKEBONO [=y] && PPC_47x [=y]
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: Yury Norov <yury.norov@gmail.com>
> ---
> arch/powerpc/platforms/44x/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
> @@ -206,6 +206,7 @@ config AKEBONO
> select PPC4xx_HSTA_MSI
> select I2C
> select I2C_IBM_IIC
> + select NET
> select NETDEVICES
> select ETHERNET
> select NET_VENDOR_IBM
I think the problem here is too much use of select, for things that
should instead be in the defconfig.
The patch below results in the same result for make
44x/akebono_defconfig. Does it fix the original issue?
We don't need to add ETHERNET or NET_VENDOR_IBM to the defconfig because
they're both default y.
cheers
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
index 3894ba8f8ffc..6b08a85f4ce6 100644
--- a/arch/powerpc/configs/44x/akebono_defconfig
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -21,6 +21,7 @@ CONFIG_IRQ_ALL_CPUS=y
# CONFIG_COMPACTION is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
+CONFIG_NETDEVICES=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -98,6 +99,8 @@ CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT2_FS=y
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 78ac6d67a935..509b329c112f 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -206,15 +206,10 @@ config AKEBONO
select PPC4xx_HSTA_MSI
select I2C
select I2C_IBM_IIC
- select NETDEVICES
- select ETHERNET
- select NET_VENDOR_IBM
select IBM_EMAC_EMAC4 if IBM_EMAC
select USB if USB_SUPPORT
select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
- select MMC_SDHCI
- select MMC_SDHCI_PLTFM
select ATA
select SATA_AHCI_PLATFORM
help
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] powerpc: fix AKEBONO build failures
2021-01-22 1:14 ` Michael Ellerman
@ 2021-01-22 1:22 ` Randy Dunlap
2021-01-30 23:21 ` Randy Dunlap
1 sibling, 0 replies; 7+ messages in thread
From: Randy Dunlap @ 2021-01-22 1:22 UTC (permalink / raw)
To: Michael Ellerman, Yury Norov, linuxppc-dev, Linux Kernel Mailing List
Cc: Paul Mackerras
On January 21, 2021 5:14:23 PM PST, Michael Ellerman <mpe@ellerman.id.au> wrote:
>Randy Dunlap <rdunlap@infradead.org> writes:
>> On 1/20/21 1:29 PM, Yury Norov wrote:
>>> Hi all,
>>>
>>> I found the power pc build broken on today's
>>> linux-next (647060f3b592).
>>
>> Darn, I was building linux-5.11-rc4.
>>
>> I'll try linux-next after I send this.
>>
>> ---
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> Fulfill AKEBONO Kconfig requirements.
>>
>> Fixes these Kconfig warnings (and more) and fixes the subsequent
>> build errors:
>>
>> WARNING: unmet direct dependencies detected for NETDEVICES
>> Depends on [n]: NET [=n]
>> Selected by [y]:
>> - AKEBONO [=y] && PPC_47x [=y]
>>
>> WARNING: unmet direct dependencies detected for MMC_SDHCI
>> Depends on [n]: MMC [=n] && HAS_DMA [=y]
>> Selected by [y]:
>> - AKEBONO [=y] && PPC_47x [=y]
>>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Paul Mackerras <paulus@samba.org>
>> Cc: linuxppc-dev@lists.ozlabs.org
>> Cc: Yury Norov <yury.norov@gmail.com>
>> ---
>> arch/powerpc/platforms/44x/Kconfig | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
>> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
>> @@ -206,6 +206,7 @@ config AKEBONO
>> select PPC4xx_HSTA_MSI
>> select I2C
>> select I2C_IBM_IIC
>> + select NET
>> select NETDEVICES
>> select ETHERNET
>> select NET_VENDOR_IBM
>
>I think the problem here is too much use of select, for things that
>should instead be in the defconfig.
>
>The patch below results in the same result for make
>44x/akebono_defconfig. Does it fix the original issue?
>
>We don't need to add ETHERNET or NET_VENDOR_IBM to the defconfig
>because
>they're both default y.
>
>cheers
>
>
>diff --git a/arch/powerpc/configs/44x/akebono_defconfig
>b/arch/powerpc/configs/44x/akebono_defconfig
>index 3894ba8f8ffc..6b08a85f4ce6 100644
>--- a/arch/powerpc/configs/44x/akebono_defconfig
>+++ b/arch/powerpc/configs/44x/akebono_defconfig
>@@ -21,6 +21,7 @@ CONFIG_IRQ_ALL_CPUS=y
> # CONFIG_COMPACTION is not set
> # CONFIG_SUSPEND is not set
> CONFIG_NET=y
>+CONFIG_NETDEVICES=y
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_INET=y
>@@ -98,6 +99,8 @@ CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_HCD_PCI is not set
> CONFIG_USB_STORAGE=y
> CONFIG_MMC=y
>+CONFIG_MMC_SDHCI=y
>+CONFIG_MMC_SDHCI_PLTFM=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_M41T80=y
> CONFIG_EXT2_FS=y
>diff --git a/arch/powerpc/platforms/44x/Kconfig
>b/arch/powerpc/platforms/44x/Kconfig
>index 78ac6d67a935..509b329c112f 100644
>--- a/arch/powerpc/platforms/44x/Kconfig
>+++ b/arch/powerpc/platforms/44x/Kconfig
>@@ -206,15 +206,10 @@ config AKEBONO
> select PPC4xx_HSTA_MSI
> select I2C
> select I2C_IBM_IIC
>- select NETDEVICES
>- select ETHERNET
>- select NET_VENDOR_IBM
> select IBM_EMAC_EMAC4 if IBM_EMAC
> select USB if USB_SUPPORT
> select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
> select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
>- select MMC_SDHCI
>- select MMC_SDHCI_PLTFM
> select ATA
> select SATA_AHCI_PLATFORM
> help
Sure. I thought that lots of what was already there
should be in the defconfig. I was just going with the flow.
Thanks for fixing it.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] powerpc: fix AKEBONO build failures
2021-01-22 1:14 ` Michael Ellerman
2021-01-22 1:22 ` Randy Dunlap
@ 2021-01-30 23:21 ` Randy Dunlap
2021-02-01 1:24 ` Michael Ellerman
1 sibling, 1 reply; 7+ messages in thread
From: Randy Dunlap @ 2021-01-30 23:21 UTC (permalink / raw)
To: Michael Ellerman, Yury Norov, linuxppc-dev, Linux Kernel Mailing List
Cc: Paul Mackerras
On 1/21/21 5:14 PM, Michael Ellerman wrote:
> Randy Dunlap <rdunlap@infradead.org> writes:
>> On 1/20/21 1:29 PM, Yury Norov wrote:
>>> Hi all,
>>>
>>> I found the power pc build broken on today's
>>> linux-next (647060f3b592).
>>
>> Darn, I was building linux-5.11-rc4.
>>
>> I'll try linux-next after I send this.
>>
>> ---
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> Fulfill AKEBONO Kconfig requirements.
>>
>> Fixes these Kconfig warnings (and more) and fixes the subsequent
>> build errors:
>>
>> WARNING: unmet direct dependencies detected for NETDEVICES
>> Depends on [n]: NET [=n]
>> Selected by [y]:
>> - AKEBONO [=y] && PPC_47x [=y]
>>
>> WARNING: unmet direct dependencies detected for MMC_SDHCI
>> Depends on [n]: MMC [=n] && HAS_DMA [=y]
>> Selected by [y]:
>> - AKEBONO [=y] && PPC_47x [=y]
>>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Paul Mackerras <paulus@samba.org>
>> Cc: linuxppc-dev@lists.ozlabs.org
>> Cc: Yury Norov <yury.norov@gmail.com>
>> ---
>> arch/powerpc/platforms/44x/Kconfig | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
>> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
>> @@ -206,6 +206,7 @@ config AKEBONO
>> select PPC4xx_HSTA_MSI
>> select I2C
>> select I2C_IBM_IIC
>> + select NET
>> select NETDEVICES
>> select ETHERNET
>> select NET_VENDOR_IBM
>
> I think the problem here is too much use of select, for things that
> should instead be in the defconfig.
>
> The patch below results in the same result for make
> 44x/akebono_defconfig. Does it fix the original issue?
Hi Michael,
Sorry for the delay.
Changing the akebono_defconfig doesn't cause the missing symbols
to be set -- the defconfig is not being used here.
I guess that if you have users who set CONFIG_AKEBONO and expect
it to build cleanly, you will need something like my patch or the
patch that Florian just posted.
Changing the akebono_defconfig also would not help 'make randconfig'
builds to build cleanly if they had happened to enable AKEBONO.
> We don't need to add ETHERNET or NET_VENDOR_IBM to the defconfig because
> they're both default y.
>
> cheers
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] powerpc: fix AKEBONO build failures
2021-01-30 23:21 ` Randy Dunlap
@ 2021-02-01 1:24 ` Michael Ellerman
0 siblings, 0 replies; 7+ messages in thread
From: Michael Ellerman @ 2021-02-01 1:24 UTC (permalink / raw)
To: Randy Dunlap, Yury Norov, linuxppc-dev, Linux Kernel Mailing List
Cc: Paul Mackerras
Randy Dunlap <rdunlap@infradead.org> writes:
> On 1/21/21 5:14 PM, Michael Ellerman wrote:
>> Randy Dunlap <rdunlap@infradead.org> writes:
>>> On 1/20/21 1:29 PM, Yury Norov wrote:
>>>> Hi all,
>>>>
>>>> I found the power pc build broken on today's
>>>> linux-next (647060f3b592).
>>>
>>> Darn, I was building linux-5.11-rc4.
>>>
>>> I'll try linux-next after I send this.
>>>
>>> ---
>>> From: Randy Dunlap <rdunlap@infradead.org>
>>>
>>> Fulfill AKEBONO Kconfig requirements.
>>>
>>> Fixes these Kconfig warnings (and more) and fixes the subsequent
>>> build errors:
>>>
>>> WARNING: unmet direct dependencies detected for NETDEVICES
>>> Depends on [n]: NET [=n]
>>> Selected by [y]:
>>> - AKEBONO [=y] && PPC_47x [=y]
>>>
>>> WARNING: unmet direct dependencies detected for MMC_SDHCI
>>> Depends on [n]: MMC [=n] && HAS_DMA [=y]
>>> Selected by [y]:
>>> - AKEBONO [=y] && PPC_47x [=y]
>>>
>>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>> Cc: Paul Mackerras <paulus@samba.org>
>>> Cc: linuxppc-dev@lists.ozlabs.org
>>> Cc: Yury Norov <yury.norov@gmail.com>
>>> ---
>>> arch/powerpc/platforms/44x/Kconfig | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
>>> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
>>> @@ -206,6 +206,7 @@ config AKEBONO
>>> select PPC4xx_HSTA_MSI
>>> select I2C
>>> select I2C_IBM_IIC
>>> + select NET
>>> select NETDEVICES
>>> select ETHERNET
>>> select NET_VENDOR_IBM
>>
>> I think the problem here is too much use of select, for things that
>> should instead be in the defconfig.
>>
>> The patch below results in the same result for make
>> 44x/akebono_defconfig. Does it fix the original issue?
>
> Hi Michael,
> Sorry for the delay.
>
> Changing the akebono_defconfig doesn't cause the missing symbols
> to be set -- the defconfig is not being used here.
Yep, but that's OK. None of those selected symbols are hard dependencies
of AKEBONO, they're just things you probably want in your kernel to
actually boot on an akebono board.
> I guess that if you have users who set CONFIG_AKEBONO and expect
> it to build cleanly, you will need something like my patch or the
> patch that Florian just posted.
It will build cleanly, it just won't necessarily boot on a real board.
Users who enable AKEBONO manually need to know what they're doing, or
they should just use the defconfig.
> Changing the akebono_defconfig also would not help 'make randconfig'
> builds to build cleanly if they had happened to enable AKEBONO.
Changing the defconfig doesn't help randconfig, but dropping the selects
does.
Anyway I'll send a proper version of my patch, which I'm pretty
confident will fix all the issues.
cheers
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-02-01 1:25 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-20 21:29 linux-next: build failure on power pc Yury Norov
2021-01-21 6:09 ` [PATCH] powerpc: fix AKEBONO build failures Randy Dunlap
2021-01-21 7:17 ` Yury Norov
2021-01-22 1:14 ` Michael Ellerman
2021-01-22 1:22 ` Randy Dunlap
2021-01-30 23:21 ` Randy Dunlap
2021-02-01 1:24 ` Michael Ellerman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).