* [PATCH v3 2/2] raid6/altivec: Add vpermxor implementation for raid6 Q syndrome
2017-04-12 1:35 [PATCH 1/2] lib/raid6: Build proper files on corresponding arch Matt Brown
@ 2017-04-12 1:35 ` Matt Brown
2017-04-12 7:01 ` [PATCH 1/2] lib/raid6: Build proper files on corresponding arch Michael Ellerman
1 sibling, 0 replies; 4+ messages in thread
From: Matt Brown @ 2017-04-12 1:35 UTC (permalink / raw)
To: linuxppc-dev; +Cc: linux-raid, dja
The raid6 Q syndrome check has been optimised using the vpermxor
instruction. This instruction was made available with POWER8, ISA version
2.07. It allows for both vperm and vxor instructions to be done in a single
instruction. This has been tested for correctness on a ppc64le vm with a
basic RAID6 setup containing 5 drives.
The performance benchmarks are from the raid6test in the /lib/raid6/test
directory. These results are from an IBM Firestone machine with ppc64le
architecture. The benchmark results show a 35% speed increase over the best
existing algorithm for powerpc (altivec). The raid6test has also been run
on a big-endian ppc64 vm to ensure it also works for big-endian
architectures.
Performance benchmarks:
raid6: altivecx4 gen() 18773 MB/s
raid6: altivecx8 gen() 19438 MB/s
raid6: vpermxor4 gen() 25112 MB/s
raid6: vpermxor8 gen() 26279 MB/s
Note: Fixed minor bug in altivec.uc regarding missing and mismatched ifdef
statements.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
---
Changelog
v2
- Change CONFIG_ALTIVEC to CPU_FTR_ALTIVEC_COMP
- Seperate bug fix into different patch
---
include/linux/raid/pq.h | 4 ++
lib/raid6/Makefile | 27 ++++++++++++-
lib/raid6/algos.c | 4 ++
lib/raid6/altivec.uc | 3 ++
lib/raid6/test/Makefile | 14 ++++++-
lib/raid6/vpermxor.uc | 104 ++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 154 insertions(+), 2 deletions(-)
create mode 100644 lib/raid6/vpermxor.uc
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index 4d57bba..3df9aa6 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -107,6 +107,10 @@ extern const struct raid6_calls raid6_avx512x2;
extern const struct raid6_calls raid6_avx512x4;
extern const struct raid6_calls raid6_tilegx8;
extern const struct raid6_calls raid6_s390vx8;
+extern const struct raid6_calls raid6_vpermxor1;
+extern const struct raid6_calls raid6_vpermxor2;
+extern const struct raid6_calls raid6_vpermxor4;
+extern const struct raid6_calls raid6_vpermxor8;
struct raid6_recov_calls {
void (*data2)(int, size_t, int, int, void **);
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 3057011..7775aad 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -4,7 +4,8 @@ raid6_pq-y += algos.o recov.o tables.o int1.o int2.o int4.o \
int8.o int16.o int32.o
raid6_pq-$(CONFIG_X86) += recov_ssse3.o recov_avx2.o mmx.o sse1.o sse2.o avx2.o avx512.o recov_avx512.o
-raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o
+raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \
+ vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o
raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o
raid6_pq-$(CONFIG_TILEGX) += tilegx8.o
raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
@@ -88,6 +89,30 @@ $(obj)/altivec8.c: UNROLL := 8
$(obj)/altivec8.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
+CFLAGS_vpermxor1.o += $(altivec_flags)
+targets += vpermxor1.c
+$(obj)/vpermxor1.c: UNROLL := 1
+$(obj)/vpermxor1.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_vpermxor2.o += $(altivec_flags)
+targets += vpermxor2.c
+$(obj)/vpermxor2.c: UNROLL := 2
+$(obj)/vpermxor2.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_vpermxor4.o += $(altivec_flags)
+targets += vpermxor4.c
+$(obj)/vpermxor4.c: UNROLL := 4
+$(obj)/vpermxor4.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
+CFLAGS_vpermxor8.o += $(altivec_flags)
+targets += vpermxor8.c
+$(obj)/vpermxor8.c: UNROLL := 8
+$(obj)/vpermxor8.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE
+ $(call if_changed,unroll)
+
CFLAGS_neon1.o += $(NEON_FLAGS)
targets += neon1.c
$(obj)/neon1.c: UNROLL := 1
diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c
index 7857049..edd4f69 100644
--- a/lib/raid6/algos.c
+++ b/lib/raid6/algos.c
@@ -74,6 +74,10 @@ const struct raid6_calls * const raid6_algos[] = {
&raid6_altivec2,
&raid6_altivec4,
&raid6_altivec8,
+ &raid6_vpermxor1,
+ &raid6_vpermxor2,
+ &raid6_vpermxor4,
+ &raid6_vpermxor8,
#endif
#if defined(CONFIG_TILEGX)
&raid6_tilegx8,
diff --git a/lib/raid6/altivec.uc b/lib/raid6/altivec.uc
index 682aae8..d20ed0d 100644
--- a/lib/raid6/altivec.uc
+++ b/lib/raid6/altivec.uc
@@ -24,10 +24,13 @@
#include <linux/raid/pq.h>
+#ifdef CONFIG_ALTIVEC
+
#include <altivec.h>
#ifdef __KERNEL__
# include <asm/cputable.h>
# include <asm/switch_to.h>
+#endif /* __KERNEL__ */
/*
* This is the C data type to use. We use a vector of
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 2c7b60e..9c333e9 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -97,6 +97,18 @@ altivec4.c: altivec.uc ../unroll.awk
altivec8.c: altivec.uc ../unroll.awk
$(AWK) ../unroll.awk -vN=8 < altivec.uc > $@
+vpermxor1.c: vpermxor.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=1 < vpermxor.uc > $@
+
+vpermxor2.c: vpermxor.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=2 < vpermxor.uc > $@
+
+vpermxor4.c: vpermxor.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=4 < vpermxor.uc > $@
+
+vpermxor8.c: vpermxor.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < vpermxor.uc > $@
+
int1.c: int.uc ../unroll.awk
$(AWK) ../unroll.awk -vN=1 < int.uc > $@
@@ -122,7 +134,7 @@ tables.c: mktables
./mktables > tables.c
clean:
- rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c neon*.c tables.c raid6test
+ rm -f *.o *.a mktables mktables.c *.uc int*.c altivec*.c vpermxor*.c neon*.c tables.c raid6test
rm -f tilegx*.c
spotless: clean
diff --git a/lib/raid6/vpermxor.uc b/lib/raid6/vpermxor.uc
new file mode 100644
index 0000000..31a324d
--- /dev/null
+++ b/lib/raid6/vpermxor.uc
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2017, Matt Brown, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * vpermxor$#.c
+ *
+ * Based on H. Peter Anvin's paper - The mathematics of RAID-6
+ *
+ * $#-way unrolled portable integer math RAID-6 instruction set
+ * This file is postprocessed using unroll.awk
+ *
+ * vpermxor$#.c makes use of the vpermxor opcode to optimise the RAID6 Q
+ * syndrome calculations.
+ * This can be run on systems which have both Altivec and the vpermxor opcode.
+ *
+ * This instruction was introduced in POWER8 - ISA v2.07.
+ */
+
+#include <linux/raid/pq.h>
+#ifdef CONFIG_ALTIVEC
+
+#include <altivec.h>
+#ifdef __KERNEL__
+#include <asm/cputable.h>
+#include <asm/switch_to.h>
+#endif
+
+typedef vector unsigned char unative_t;
+#define NSIZE sizeof(unative_t)
+
+static const vector unsigned char gf_low = {0x1e, 0x1c, 0x1a, 0x18, 0x16, 0x14,
+ 0x12, 0x10, 0x0e, 0x0c, 0x0a, 0x08,
+ 0x06, 0x04, 0x02,0x00};
+static const vector unsigned char gf_high = {0xfd, 0xdd, 0xbd, 0x9d, 0x7d, 0x5d,
+ 0x3d, 0x1d, 0xe0, 0xc0, 0xa0, 0x80,
+ 0x60, 0x40, 0x20, 0x00};
+
+static void noinline raid6_vpermxor$#_gen_syndrome_real(int disks, size_t bytes,
+ void **ptrs)
+{
+ u8 **dptr = (u8 **)ptrs;
+ u8 *p, *q;
+ int d, z, z0;
+ unative_t wp$$, wq$$, wd$$;
+
+ z0 = disks - 3; /* Highest data disk */
+ p = dptr[z0+1]; /* XOR parity */
+ q = dptr[z0+2]; /* RS syndrome */
+
+ for (d = 0; d < bytes; d += NSIZE*$#) {
+ wp$$ = wq$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
+
+ for (z = z0-1; z>=0; z--) {
+ wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
+ /* P syndrome */
+ wp$$ = vec_xor(wp$$, wd$$);
+
+ /*Q syndrome */
+ asm("vpermxor %0,%1,%2,%3":"=v"(wq$$):"v"(gf_high), "v"(gf_low), "v"(wq$$));
+ wq$$ = vec_xor(wq$$, wd$$);
+ }
+ *(unative_t *)&p[d+NSIZE*$$] = wp$$;
+ *(unative_t *)&q[d+NSIZE*$$] = wq$$;
+ }
+}
+
+static void raid6_vpermxor$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+ preempt_disable();
+ enable_kernel_altivec();
+
+ raid6_vpermxor$#_gen_syndrome_real(disks, bytes, ptrs);
+
+ disable_kernel_altivec();
+ preempt_enable();
+}
+
+int raid6_have_altivec_vpermxor(void);
+#if $# == 1
+int raid6_have_altivec_vpermxor(void)
+{
+ /* Check if CPU has both altivec and the vpermxor instruction*/
+# ifdef __KERNEL__
+ return (cpu_has_feature(CPU_FTR_ALTIVEC_COMP) &&
+ cpu_has_feature(CPU_FTR_ARCH_207S));
+# else
+ return 1;
+#endif
+
+}
+#endif
+
+const struct raid6_calls raid6_vpermxor$# = {
+ raid6_vpermxor$#_gen_syndrome,
+ NULL,
+ raid6_have_altivec_vpermxor,
+ "vpermxor$#",
+ 0
+};
+#endif
--
2.9.3
^ permalink raw reply related [flat|nested] 4+ messages in thread