LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Li Yang <leoyang.li@nxp.com>
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>,
	David Miller <davem@davemloft.net>,
	 Scott Wood <oss@buserror.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Timur Tabi <timur@kernel.org>, Qiang Zhao <qiang.zhao@nxp.com>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	lkml <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 00/47] QUICC Engine support on ARM and ARM64
Date: Tue, 12 Nov 2019 14:45:17 -0600
Message-ID: <CADRPPNQFiPMvRcSkVgM8p2_AxhqBOVFus=cX5UC-8NYYUvf+0A@mail.gmail.com> (raw)
In-Reply-To: <CADRPPNSeEvFnVzGeZW6RPo_LP8mq14G2ZmmDAuwNdC3hT8Ekcg@mail.gmail.com>

On Mon, Nov 11, 2019 at 5:39 PM Li Yang <leoyang.li@nxp.com> wrote:
>
> On Fri, Nov 8, 2019 at 7:05 AM Rasmus Villemoes
> <linux@rasmusvillemoes.dk> wrote:
> >
>
> I'm generally ok with these enhencements and cleanups.  But as the
> whole patch series touched multiple subsystems, I would like to
> collect the Acked-by from Scott, Greg and David if we want the whole
> series to go through the fsl/soc tree.

Rasmus,

Since the patches also touched net and serial subsystem.  Can you also
repost these patches(maybe just related ones) onto netdev and
linux-serial mailing list?

Regards,
Leo
>
> Also Qiang, can you help to test the latest version and provide you
> Tested-by?  Thanks.
>
> > There have been several attempts in the past few years to allow
> > building the QUICC engine drivers for platforms other than PPC. This
> > is yet another attempt.
> >
> > v3 can be found here: https://lore.kernel.org/lkml/20191101124210.14510-1-linux@rasmusvillemoes.dk/
> >
> > v4 adds a some patches to fix (ab)use of IS_ERR_VALUE which fails when
> > sizeof(u32) != sizeof(long), i.e. on 64-bit platforms. Freescale
> > drivers are some of the last holdouts using that macro (outside of
> > arch/ and core mm code), so I decided trying to simply get rid of it
> > instead of papering over it by using a temporary long to store the
> > result in. Doing that I stumbled on some other things that should be
> > fixed. These are the new patches 34-45.
> >
> > Patch 35 from v3 (which added a PPC32 dependency to FSL_UCC_HDLC) is
> > gone from this version, so that that driver can indeed now be built
> > for arm and arm64.
> >
> > 1-5 are about replacing in_be32 etc. in the core QE code (drivers/soc/fsl/qe).
> >
> > 6-8 handle miscellaneous other ppcisms.
> >
> > 9-21 deal with qe_ic: Simplifying the driver significantly by removing
> > unused code, and removing the platform-specific initialization from
> > arch/powerpc/.
> >
> > 22-25 deal with raw access to devicetree properties in native endianness.
> >
> > 26-33 makes drivers/tty/serial/ucc_uart.c (CONFIG_SERIAL_QE) ready to build on arm.
> >
> > 34-45 deal with IS_ERR_VALUE() and some other things found while
> > digging around that part of the code.
> >
> > 46 adds a PPC32 dependency to UCC_GETH - it has some of the same
> > issues that have been fixed in the ucc_uart and ucc_hdlc cases. Nobody
> > has requested that I allow that driver to be built for arm{,64}, so
> > instead of growing this series even bigger, I kept that addition. It's
> > trivial to remove if somebody cares enough to fix the build
> > errors/warnings and actually has a platform to test the result on.
> >
> > Finally patch 47 lifts the PPC32 restriction from QUICC_ENGINE. At the
> > request of Li Yang, it doesn't remove the PPC32 dependency but instead
> > changes it to PPC32 || ARM || ARM64 (or COMPILE_TEST), i.e. listing
> > the platforms that may have a QE.
> >
> > The series has been built and booted on both an mpc8309-based platform
> > (ppc) as well as an ls1021a-based platform (arm). The core QE code is
> > exercised on both, while I could only test the ucc_uart on arm, since
> > the uarts are not wired up on our mpc8309 board. Qiang Zhao reports
> > that the ucc_hdlc driver does indeed work on a ls1043ardb (arm64)
> > board, I hope he'll formally add a Tested-by: to the relevant patches
> > since I don't have any arm64 board with QE.
> >
> > Rasmus Villemoes (47):
> >   soc: fsl: qe: remove space-before-tab
> >   soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs
> >   soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers
> >   soc: fsl: qe: introduce qe_io{read,write}* wrappers
> >   soc: fsl: qe: avoid ppc-specific io accessors
> >   soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic
> >   soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32
> >   soc: fsl: qe: drop unneeded #includes
> >   soc: fsl: qe: drop assign-only high_active in qe_ic_init
> >   soc: fsl: qe: remove pointless sysfs registration in qe_ic.c
> >   soc: fsl: qe: use qe_ic_cascade_{low,high}_mpic also on 83xx
> >   soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/
> >   powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ
> >   powerpc/85xx: remove mostly pointless mpc85xx_qe_init()
>
> Scott,
> What do you think about the PPC changes?
>
> >   soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c
> >   soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low
> >   soc: fsl: qe: remove unused qe_ic_set_* functions
> >   soc: fsl: qe: don't use NO_IRQ in qe_ic.c
> >   soc: fsl: qe: make qe_ic_get_{low,high}_irq static
> >   soc: fsl: qe: simplify qe_ic_init()
> >   soc: fsl: qe: merge qe_ic.h headers into qe_ic.c
> >   soc: fsl: qe: qe.c: use of_property_read_* helpers
> >   soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle()
> >   soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpu
> >   soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init()
> >   soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl
> >   soc/fsl/qe/qe.h: update include path for cpm.h
> >   serial: ucc_uart: explicitly include soc/fsl/cpm.h
> >   serial: ucc_uart: replace ppc-specific IO accessors
> >   serial: ucc_uart: factor out soft_uart initialization
> >   serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
> >   serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
> >   serial: ucc_uart: access __be32 field using be32_to_cpu
>
> Greg and Timur,
> What do you think about these serial changes.
>
> >   soc: fsl: qe: change return type of cpm_muram_alloc() to s32
> >   soc: fsl: qe: make cpm_muram_free() return void
> >   soc: fsl: qe: make cpm_muram_free() ignore a negative offset
> >   soc: fsl: qe: drop broken lazy call of cpm_muram_init()
> >   soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error
> >     path
> >   soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
> >   soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()
> >   soc: fsl: qe: drop pointless check in qe_sdma_init()
> >   soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
> >   net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()
> >   net/wan/fsl_ucc_hdlc: fix reading of __be16 registers
> >   net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
> >   net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
>
> David and Qiang,
> What do you think of the net changes?
>
> >   soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
> >
> >  arch/powerpc/include/asm/cpm.h                | 172 +-------
> >  arch/powerpc/platforms/83xx/km83xx.c          |   3 +-
> >  arch/powerpc/platforms/83xx/misc.c            |  23 --
> >  arch/powerpc/platforms/83xx/mpc832x_mds.c     |   3 +-
> >  arch/powerpc/platforms/83xx/mpc832x_rdb.c     |   3 +-
> >  arch/powerpc/platforms/83xx/mpc836x_mds.c     |   3 +-
> >  arch/powerpc/platforms/83xx/mpc836x_rdk.c     |   3 +-
> >  arch/powerpc/platforms/83xx/mpc83xx.h         |   7 -
> >  arch/powerpc/platforms/85xx/common.c          |  23 --
> >  arch/powerpc/platforms/85xx/corenet_generic.c |  12 -
> >  arch/powerpc/platforms/85xx/mpc85xx.h         |   2 -
> >  arch/powerpc/platforms/85xx/mpc85xx_mds.c     |  28 --
> >  arch/powerpc/platforms/85xx/mpc85xx_rdb.c     |  18 -
> >  arch/powerpc/platforms/85xx/twr_p102x.c       |  16 -
> >  drivers/net/ethernet/freescale/Kconfig        |   2 +-
> >  drivers/net/wan/fsl_ucc_hdlc.c                |  23 +-
> >  drivers/net/wan/fsl_ucc_hdlc.h                |   2 +-
> >  drivers/soc/fsl/qe/Kconfig                    |   3 +-
> >  drivers/soc/fsl/qe/gpio.c                     |  34 +-
> >  drivers/soc/fsl/qe/qe.c                       | 104 ++---
> >  drivers/soc/fsl/qe/qe_common.c                |  50 +--
> >  drivers/soc/fsl/qe/qe_ic.c                    | 285 ++++++-------
> >  drivers/soc/fsl/qe/qe_ic.h                    |  99 -----
> >  drivers/soc/fsl/qe/qe_io.c                    |  70 ++--
> >  drivers/soc/fsl/qe/qe_tdm.c                   |   8 +-
> >  drivers/soc/fsl/qe/ucc.c                      |  26 +-
> >  drivers/soc/fsl/qe/ucc_fast.c                 |  86 ++--
> >  drivers/soc/fsl/qe/ucc_slow.c                 |  60 ++-
> >  drivers/soc/fsl/qe/usb.c                      |   2 +-
> >  drivers/tty/serial/ucc_uart.c                 | 383 +++++++++---------
> >  include/soc/fsl/cpm.h                         | 171 ++++++++
> >  include/soc/fsl/qe/qe.h                       |  59 ++-
> >  include/soc/fsl/qe/qe_ic.h                    | 135 ------
> >  include/soc/fsl/qe/ucc_fast.h                 |   4 +-
> >  include/soc/fsl/qe/ucc_slow.h                 |   6 +-
> >  35 files changed, 770 insertions(+), 1158 deletions(-)
> >  delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
> >  create mode 100644 include/soc/fsl/cpm.h
> >  delete mode 100644 include/soc/fsl/qe/qe_ic.h
> >
> > --
> > 2.23.0
> >

  reply index

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-08 13:00 Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 01/47] soc: fsl: qe: remove space-before-tab Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 02/47] soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 03/47] soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 04/47] soc: fsl: qe: introduce qe_io{read,write}* wrappers Rasmus Villemoes
2019-11-12  5:17   ` [PATCH v4 04/47] soc: fsl: qe: introduce qe_io{read, write}* wrappers Timur Tabi
2019-11-12  7:14     ` [PATCH v4 04/47] soc: fsl: qe: introduce qe_io{read,write}* wrappers Rasmus Villemoes
2019-11-14  5:08       ` Timur Tabi
2019-11-14  8:55         ` Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 05/47] soc: fsl: qe: avoid ppc-specific io accessors Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 06/47] soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 07/47] soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32 Rasmus Villemoes
2019-11-15  4:50   ` Timur Tabi
2019-11-15  8:11     ` Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 08/47] soc: fsl: qe: drop unneeded #includes Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 09/47] soc: fsl: qe: drop assign-only high_active in qe_ic_init Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 10/47] soc: fsl: qe: remove pointless sysfs registration in qe_ic.c Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 11/47] soc: fsl: qe: use qe_ic_cascade_{low, high}_mpic also on 83xx Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 12/47] soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/ Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 13/47] powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 14/47] powerpc/85xx: remove mostly pointless mpc85xx_qe_init() Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 15/47] soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 16/47] soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 17/47] soc: fsl: qe: remove unused qe_ic_set_* functions Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 18/47] soc: fsl: qe: don't use NO_IRQ in qe_ic.c Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 19/47] soc: fsl: qe: make qe_ic_get_{low,high}_irq static Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 20/47] soc: fsl: qe: simplify qe_ic_init() Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 21/47] soc: fsl: qe: merge qe_ic.h headers into qe_ic.c Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 22/47] soc: fsl: qe: qe.c: use of_property_read_* helpers Rasmus Villemoes
2019-11-08 13:00 ` [PATCH v4 23/47] soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle() Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 24/47] soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpu Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 25/47] soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init() Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 26/47] soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 27/47] soc/fsl/qe/qe.h: update include path for cpm.h Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 28/47] serial: ucc_uart: explicitly include soc/fsl/cpm.h Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 29/47] serial: ucc_uart: replace ppc-specific IO accessors Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 30/47] serial: ucc_uart: factor out soft_uart initialization Rasmus Villemoes
2019-11-14  5:14   ` Timur Tabi
2019-11-14  9:00     ` Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 31/47] serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32 Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe() Rasmus Villemoes
2019-11-14 13:57   ` Timur Tabi
2019-11-15  8:01     ` Rasmus Villemoes
2019-11-15 14:35       ` Timur Tabi
2019-11-15 22:44         ` Scott Wood
2019-11-15  4:25   ` Timur Tabi
2019-11-15  7:57     ` Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 33/47] serial: ucc_uart: access __be32 field using be32_to_cpu Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 34/47] soc: fsl: qe: change return type of cpm_muram_alloc() to s32 Rasmus Villemoes
2019-11-12  8:01   ` Qiang Zhao
2019-11-12  8:17     ` Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 35/47] soc: fsl: qe: make cpm_muram_free() return void Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 36/47] soc: fsl: qe: make cpm_muram_free() ignore a negative offset Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 37/47] soc: fsl: qe: drop broken lazy call of cpm_muram_init() Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 38/47] soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error path Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 39/47] soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 40/47] soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init() Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 41/47] soc: fsl: qe: drop pointless check " Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 42/47] soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 43/47] net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE() Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 44/47] net/wan/fsl_ucc_hdlc: fix reading of __be16 registers Rasmus Villemoes
2019-11-08 13:01 ` [PATCH v4 45/47] net/wan/fsl_ucc_hdlc: reject muram offsets above 64K Rasmus Villemoes
2019-11-15  4:41   ` Timur Tabi
2019-11-15  7:44     ` Rasmus Villemoes
2019-11-15 14:33       ` Timur Tabi
2019-11-08 13:01 ` [PATCH v4 46/47] net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32 Rasmus Villemoes
2019-11-15  4:35   ` Timur Tabi
2019-11-15  5:44     ` Li Yang
2019-11-15  7:54       ` Rasmus Villemoes
2019-11-15 14:32         ` Timur Tabi
2019-11-15 14:31       ` Timur Tabi
2019-11-08 13:01 ` [PATCH v4 47/47] soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE Rasmus Villemoes
2019-11-08 23:48   ` Li Yang
2019-11-11  7:33     ` Rasmus Villemoes
2019-11-11 18:11       ` Li Yang
2019-11-13  2:48   ` Qiang Zhao
2019-11-20 19:42   ` kbuild test robot
2019-11-11 23:39 ` [PATCH v4 00/47] QUICC Engine support on ARM and ARM64 Li Yang
2019-11-12 20:45   ` Li Yang [this message]
2019-11-13  7:26     ` Rasmus Villemoes

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CADRPPNQFiPMvRcSkVgM8p2_AxhqBOVFus=cX5UC-8NYYUvf+0A@mail.gmail.com' \
    --to=leoyang.li@nxp.com \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=oss@buserror.net \
    --cc=qiang.zhao@nxp.com \
    --cc=timur@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git