linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
	linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 60/89] drm/vc4: crtc: Add BCM2711 pixelvalves
Date: Mon, 24 Feb 2020 10:07:02 +0100	[thread overview]
Message-ID: <0369f1cccd28e89dd64869e73dab5bbcbaf5e793.1582533919.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.6c896ace9a5a7840e9cec008b553cbb004ca1f91.1582533919.git-series.maxime@cerno.tech>

The BCM2711 has 5 pixelvalves, so now that our driver is ready, let's add
support for them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 82 ++++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/vc4/vc4_regs.h |  6 +++-
 2 files changed, 86 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index b10b267f56fe..82ae787fca58 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -273,6 +273,13 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
 	case PV_CONTROL_FORMAT_24:
 	case PV_CONTROL_FORMAT_DSIV_24:
 	default:
+		/*
+		 * For some reason, the pixelvalve4 doesn't work with
+		 * the usual formula and will only work with 32.
+		 */
+		if (vc4_crtc->data->hvs_output == 5)
+			return 32;
+
 		return fifo_len_bytes - 3 * HVS_FIFO_LATENCY_PIX;
 	}
 }
@@ -281,8 +288,14 @@ static u32 vc4_crtc_get_fifo_full_level_bits(struct vc4_crtc *vc4_crtc,
 					     u32 format)
 {
 	u32 level = vc4_get_fifo_full_level(vc4_crtc, format);
-	return VC4_SET_FIELD(level & 0x3f,
-			     PV_CONTROL_FIFO_LEVEL);
+	u32 ret = 0;
+
+	if (level > 0x3f)
+		ret |= VC4_SET_FIELD((level >> 6) & 0x3,
+				     PV5_CONTROL_FIFO_LEVEL_HIGH);
+
+	return ret | VC4_SET_FIELD(level & 0x3f,
+				   PV_CONTROL_FIFO_LEVEL);
 }
 
 /*
@@ -328,6 +341,9 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
 	CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
 	CRTC_WRITE(PV_CONTROL, 0);
 
+	CRTC_WRITE(PV_MUX_CFG,
+		   VC4_SET_FIELD(8, PV_MUX_CFG_RGB_PIXEL_MUX_MODE));
+
 	CRTC_WRITE(PV_HORZA,
 		   VC4_SET_FIELD((mode->htotal - mode->hsync_end) * pixel_rep / ppc,
 				 PV_HORZA_HBP) |
@@ -1114,10 +1130,72 @@ static const struct vc4_crtc_data bcm2835_pv2_data = {
 	},
 };
 
+static const struct vc4_crtc_data bcm2711_pv0_data = {
+	.debugfs_name = "crtc0_regs",
+	.hvs_available_channels = BIT(0),
+	.hvs_output = 0,
+	.fifo_depth = 64,
+	.pixels_per_clock = 1,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_DSI0,
+		[1] = VC4_ENCODER_TYPE_DPI,
+	},
+};
+
+static const struct vc4_crtc_data bcm2711_pv1_data = {
+	.debugfs_name = "crtc1_regs",
+	.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+	.hvs_output = 3,
+	.fifo_depth = 64,
+	.pixels_per_clock = 1,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_DSI1,
+		[1] = VC4_ENCODER_TYPE_SMI,
+	},
+};
+
+static const struct vc4_crtc_data bcm2711_pv2_data = {
+	.debugfs_name = "crtc2_regs",
+	.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+	.hvs_output = 4,
+	.fifo_depth = 256,
+	.pixels_per_clock = 2,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_HDMI0,
+	},
+};
+
+static const struct vc4_crtc_data bcm2711_pv3_data = {
+	.debugfs_name = "crtc3_regs",
+	.hvs_available_channels = BIT(1),
+	.hvs_output = 1,
+	.fifo_depth = 64,
+	.pixels_per_clock = 1,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_VEC,
+	},
+};
+
+static const struct vc4_crtc_data bcm2711_pv4_data = {
+	.debugfs_name = "crtc4_regs",
+	.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+	.hvs_output = 5,
+	.fifo_depth = 64,
+	.pixels_per_clock = 2,
+	.encoder_types = {
+		[0] = VC4_ENCODER_TYPE_HDMI1,
+	},
+};
+
 static const struct of_device_id vc4_crtc_dt_match[] = {
 	{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &bcm2835_pv0_data },
 	{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &bcm2835_pv1_data },
 	{ .compatible = "brcm,bcm2835-pixelvalve2", .data = &bcm2835_pv2_data },
+	{ .compatible = "brcm,bcm2711-pixelvalve0", .data = &bcm2711_pv0_data },
+	{ .compatible = "brcm,bcm2711-pixelvalve1", .data = &bcm2711_pv1_data },
+	{ .compatible = "brcm,bcm2711-pixelvalve2", .data = &bcm2711_pv2_data },
+	{ .compatible = "brcm,bcm2711-pixelvalve3", .data = &bcm2711_pv3_data },
+	{ .compatible = "brcm,bcm2711-pixelvalve4", .data = &bcm2711_pv4_data },
 	{}
 };
 
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index b96ebbb1354b..35279b118d41 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -130,6 +130,8 @@
 #define V3D_ERRSTAT  0x00f20
 
 #define PV_CONTROL				0x00
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_MASK	VC4_MASK(26, 25)
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_SHIFT	25
 # define PV_CONTROL_FORMAT_MASK			VC4_MASK(23, 21)
 # define PV_CONTROL_FORMAT_SHIFT		21
 # define PV_CONTROL_FORMAT_24			0
@@ -209,6 +211,10 @@
 
 #define PV_HACT_ACT				0x30
 
+#define PV_MUX_CFG				0x34
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_MASK	VC4_MASK(5, 2)
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_SHIFT	2
+
 #define SCALER_CHANNELS_COUNT			3
 
 #define SCALER_DISPCTRL                         0x00000000
-- 
git-series 0.9.1

  parent reply	other threads:[~2020-02-24  9:12 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24  9:06 [PATCH 00/89] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-02-24  9:06 ` [PATCH 01/89] dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema Maxime Ripard
2020-02-24 17:40   ` Florian Fainelli
2020-02-25 18:14   ` Rob Herring
2020-03-10 10:07   ` Wolfram Sang
2020-03-10 10:07   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding Maxime Ripard
2020-02-24 17:48   ` Florian Fainelli
2020-02-25 18:15   ` Rob Herring
2020-03-10 10:07   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 03/89] i2c: brcmstb: Support BCM2711 HDMI BSC controllers Maxime Ripard
2020-02-24 17:44   ` Florian Fainelli
2020-03-10 10:12   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 04/89] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-02-24 17:39   ` Florian Fainelli
2020-03-10 10:16   ` Wolfram Sang
2020-02-24  9:06 ` [PATCH 05/89] clk: Return error code when of provider pointer is NULL Maxime Ripard
2020-03-12 23:13   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 06/89] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-02-25 18:16   ` Rob Herring
2020-03-12 23:14     ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 07/89] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-02-25 16:00   ` Nicolas Saenz Julienne
2020-02-26 15:01     ` Maxime Ripard
2020-02-28 19:57       ` Nicolas Saenz Julienne
2020-03-01 12:16   ` Stefan Wahren
2020-03-23 15:13     ` Maxime Ripard
2020-02-24  9:06 ` [PATCH 08/89] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-02-25 16:05   ` Nicolas Saenz Julienne
2020-02-24  9:06 ` [PATCH 09/89] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-02-25 16:11   ` Nicolas Saenz Julienne
2020-03-12 23:17   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 10/89] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-02-25 16:13   ` Nicolas Saenz Julienne
2020-02-26 14:26     ` Maxime Ripard
2020-02-26 14:57       ` Nicolas Saenz Julienne
2020-02-24  9:06 ` [PATCH 11/89] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-02-25 16:14   ` Nicolas Saenz Julienne
2020-03-12 23:20   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 12/89] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-02-25 16:16   ` Nicolas Saenz Julienne
2020-03-12 23:21   ` Stephen Boyd
2020-03-13  1:13   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 13/89] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-02-25 16:17   ` Nicolas Saenz Julienne
2020-03-13  1:12   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 14/89] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-02-25 16:19   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 15/89] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-02-25 16:24   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 16/89] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-02-24 19:25   ` Stefan Wahren
2020-02-25  9:54     ` Maxime Ripard
2020-02-25 14:33       ` Nicolas Saenz Julienne
2020-02-25 16:24   ` Nicolas Saenz Julienne
2020-03-13  1:11   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 17/89] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-02-25 16:26   ` Nicolas Saenz Julienne
2020-03-13  1:09   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 18/89] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-02-25 16:45   ` Nicolas Saenz Julienne
2020-03-13  1:09   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 19/89] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-03-13  1:08   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 20/89] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-03-13  1:01   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 21/89] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-03-13  1:01   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-02-24 16:47   ` kbuild test robot
2020-02-24 16:47   ` [PATCH] clk: bcm: rpi: fix noderef.cocci warnings kbuild test robot
2020-02-24 18:15   ` [PATCH 22/89] clk: bcm: rpi: Discover the firmware clocks Florian Fainelli
2020-02-26 14:15     ` Maxime Ripard
2020-02-24 20:24   ` kbuild test robot
2020-03-13  1:08   ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 23/89] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-02-24  9:06 ` [PATCH 24/89] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-02-24  9:06 ` [PATCH 25/89] reset: simple: Add reset callback Maxime Ripard
2020-03-04 12:03   ` Philipp Zabel
2020-02-24  9:06 ` [PATCH 26/89] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-02-25 18:17   ` Rob Herring
2020-02-24  9:06 ` [PATCH 27/89] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-03-13  1:00   ` Stephen Boyd
2020-03-23 10:56     ` Maxime Ripard
2020-03-25  2:20       ` Stephen Boyd
2020-02-24  9:06 ` [PATCH 28/89] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-02-24  9:06 ` [PATCH 29/89] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-02-24 18:41   ` Rob Herring
2020-02-25 11:54     ` Maxime Ripard
2020-02-25 14:02       ` Rob Herring
2020-02-24  9:06 ` [PATCH 30/89] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-02-25 18:17   ` Rob Herring
2020-02-24  9:06 ` [PATCH 31/89] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 32/89] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 33/89] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-02-25 18:18   ` Rob Herring
2020-02-24  9:06 ` [PATCH 34/89] drm/vc4: drv: Add include guards Maxime Ripard
2020-02-24  9:06 ` [PATCH 35/89] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-02-24  9:06 ` [PATCH 36/89] drm/vc4: drv: Add support for the BCM2711 HVS5 Maxime Ripard
2020-02-24  9:06 ` [PATCH 37/89] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-02-24  9:06 ` [PATCH 38/89] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-02-24  9:06 ` [PATCH 39/89] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-02-24  9:06 ` [PATCH 40/89] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-02-24  9:06 ` [PATCH 41/89] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-02-24  9:06 ` [PATCH 42/89] drm/vc4: plane: Create more planes Maxime Ripard
2020-02-24  9:06 ` [PATCH 43/89] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-02-24  9:06 ` [PATCH 44/89] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-02-24  9:06 ` [PATCH 45/89] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-02-24  9:06 ` [PATCH 46/89] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-02-24  9:06 ` [PATCH 47/89] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-02-24  9:06 ` [PATCH 48/89] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-02-24  9:06 ` [PATCH 49/89] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-02-24  9:06 ` [PATCH 50/89] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-02-24  9:06 ` [PATCH 51/89] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-02-24  9:06 ` [PATCH 52/89] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-02-24  9:06 ` [PATCH 53/89] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-02-24  9:06 ` [PATCH 54/89] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-02-24  9:06 ` [PATCH 55/89] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-02-24  9:06 ` [PATCH 56/89] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-02-24  9:06 ` [PATCH 57/89] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-02-24  9:07 ` [PATCH 58/89] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-02-24  9:07 ` [PATCH 59/89] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-02-25 18:19   ` Rob Herring
2020-02-24  9:07 ` Maxime Ripard [this message]
2020-02-24  9:07 ` [PATCH 61/89] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-02-24  9:07 ` [PATCH 62/89] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-02-24  9:07 ` [PATCH 63/89] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-02-24  9:07 ` [PATCH 64/89] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-02-24  9:07 ` [PATCH 65/89] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-02-24  9:07 ` [PATCH 66/89] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-02-24  9:07 ` [PATCH 67/89] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-02-24  9:07 ` [PATCH 68/89] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-02-24  9:07 ` [PATCH 69/89] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-02-24  9:07 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-02-24  9:07 ` [PATCH 71/89] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-02-24  9:07 ` [PATCH 72/89] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-02-24  9:07 ` [PATCH 73/89] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-02-24  9:07 ` [PATCH 74/89] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 75/89] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-02-24  9:07 ` [PATCH 76/89] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-02-24  9:07 ` [PATCH 77/89] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 78/89] drm/vc4: hdmi: Add a set_timings callback Maxime Ripard
2020-02-24  9:07 ` [PATCH 79/89] drm/vc4: hdmi: Add HDMI ID Maxime Ripard
2020-02-24  9:07 ` [PATCH 80/89] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-02-24  9:07 ` [PATCH 81/89] drm/vc4: hdmi: Add an audio support flag Maxime Ripard
2020-02-24  9:07 ` [PATCH 82/89] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-02-24  9:07 ` [PATCH 83/89] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-02-24  9:07 ` [PATCH 84/89] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-02-24  9:07 ` [PATCH 85/89] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-02-24  9:07 ` [PATCH 86/89] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-03-16 12:54   ` Nicolas Saenz Julienne
2020-02-24  9:07 ` [PATCH 87/89] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-03-17 18:25   ` Daniel Rodriguez
2020-02-24  9:07 ` [PATCH 88/89] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-02-25 18:24   ` Rob Herring
2020-02-24  9:07 ` [PATCH 89/89] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-03-05 10:00 ` [PATCH 70/89] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Jian-Hong Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0369f1cccd28e89dd64869e73dab5bbcbaf5e793.1582533919.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).